V-TAC T5 Intergrated Fitting Instruction Manual
- June 6, 2024
- V TAC
Table of Contents
WEEE Number: 80133970
INSTALLATION INSTRUCTION
T5 INTEGRATED FITTING
VT-035, VT-065, VT-125
L I NKABLE
UP TO 100 WATTS TOGETHER
TECHNICAL DATA
Model| Watts| Lumens| CRI| Beam Angle| Body Type| Long
Life| On/Off
Cycles| Dimension| Input Power
---|---|---|---|---|---|---|---|---|---
VT-035| 4W| 360| >80| 120| Plastic| 30,000
Hours| >15000| 307×22.5x36mm| AC:220-240V,50/60Hz
VT-065| 7W| 630| >80| 120| Plastic| 30,000
Hours| >15000| 567×22.5x36mm| AC:220-240V,50/60Hz
VT-125| 16W| 1440| >80| 120| Plastic| 30,000
Hours| >15000| 1167×22.5x36mm| AC:220-240V,50/60Hz
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard
- Installation must be performed by a qualified electrician.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
T5 INTEGRATED FITTING
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
other queries, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at your best.
The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours of Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation should only be done by a certified electrician.
INSTALLATION REQUIREMENTS
- Installation only by a certified electrician
- Operation environment temperature: from -20°C to +45°C
- Do NOT use DC electricity
MOUNTING INSTALLATION DIAGRAM
PACKING
- T5 Integrated Fixture (1PC)
- Mounting Clips (2PCS)
- Quick connecting double head wire(1PC)
- Screws (2PCS)
INSTALLATION INSTRUCTIONS
A. Turn OFF electricity before starting!
B. Follow the diagram below:
WIRING DIAGRAM
1. Quick Connecting wire with double head.
| 2. Using a wire clipper cut off
one end of the connecting wire. Ensure to strip the wire up to 5mm
---|---
3. Plug the connecting wire into the fixture as shown below
| 4.
Power the end of the connecting wire which was cut to an input power
source.
5 . Linkable T5 tube allows you to connect two lights together.
| 6.
Easy Connecting wire allows flexibility of installing the T5 fixture for
corner installation as well as linear installation.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>