Zaor Vision W workstation 9 RU Instruction Manual
- June 6, 2024
- Zaor
Table of Contents
BUDGET-CUSTOM-DESIGN
Vision W
workstation 9 RU
Assembly Manual
Thank you for choosing a piece of Zaor studio furniture, which will hopefully make your life easier, more ergonomic, and improve the looks of your workspace. Before you can enjoy the comfort of your new acquisition you need to assemble it. We have tried to give you as much detail as needed and as little as possible. Should you run into any difficulty with this assembly you can get in touch with us via sales@zaorstudiofurniture.com to set up a Skype session or phone call.
Here is a general instruction on how to use the furniture assembly kits:
- Insert and screw in the system bolt(s) into the socket(s) already present on the part(s) making sure the hole is at 90° from the edge Assemble the connecting parts, inserting the bolts into the smaller holes in the connecting part, the bolt tip fitting into the side hole of the excenter until the hole in the bolt and the center hole of the excenter align
- insert the locking screw into the excenter, and tighten with a cross screwdriver all the way without using force!
Packing list
Materials used:
– particleboard;
– metal hardware.
PACKING LIST
– 12 wood parts;
– rack screws – 36;
– assembly kits – 28 pcs;
– M6 x 35 screws – 12 pcs .
Instructions for use and cleaning
– clean with a soft cloth, slightly humid or specific products for wood or
lacquer;
– avoid the use of abrasive cleaners!
For assembly, we recommend being at least two people.
ZAOR Studio Furniture SRL
Tel: +352 278 495 65
Email: sales@zaorstudiofurniture.com
Web: www.zaorstudiofurniture.com