NINJA JC100 Series Cold Press Juicer Owner’s Manual
- June 6, 2024
- Ninja
Table of Contents
COLD PRESS JUICER
JC100 Series
OWNER’S GUIDE
THANK YOU
for purchasing the Ninja® Cold Press Juicer
REGISTER YOUR PURCHASE
registeryourninja.com
Scan QR code using a mobile device
RECORD THIS INFORMATION
Model Number: ————————–
Serial Number: ————————–
Date of Purchase: ————————–
(Keep receipt)
Store of Purchase: ————————–
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 150 Watts
LEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
TIP: You can find the model and serial numbers on the QR code label on the back of the unit by the power cord.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE
- FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock, or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions. Do not use appliances other
than intended use.
-
Read all instructions prior to using the appliance and its accessories.
-
Carefully observe and follow all warnings and instructions. This unit contains electrical connections and moving parts that potentially present
a risk to the user. -
DO NOT submerge the motor base or control panel in water or other liquids.
DO NOT spray motor base or control panel with any liquid. -
Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.
-
Always make sure the pulp spout is securely in place before the motor is turned on. DO NOT unfasten parts while the juicer is in operation.
-
Be sure to turn the appliance off after each use. Make sure the motor stops completely before disassembling.
-
Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.
-
Before use, wash all parts that may contact food. Follow the washing instructions covered in this instruction manual.
-
Before each use, inspect the auger for damage. If an auger is bent or damage is suspected, contact SharkNinja to arrange for a replacement.
-
DO NOT use this appliance outdoors. It is designed for indoor household use only.
-
This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT modify the plug in any way. -
DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged, contact SharkNinja for servicing.
-
This appliance has important markings on the plug blade. The entire supply cord is not suitable for replacement. If damaged, please contact SharkNinja for service.
-
Extension cords should NOT be used with this appliance.
-
To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.
-
DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.
-
DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
-
ALWAYS use the appliance on a dry and level surface.
-
DO NOT allow children to operate this appliance or use it as a toy. Close supervision is necessary when any appliance is used near children.
-
This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
-
Only use attachments and accessories that are provided with the product or are recommended by SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja may cause fire, electric shock, or injury.
-
DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the tamper or another piece of fruit or vegetable to push it down.
When this method is not possible, turn the motor off and disassemble the juicer to remove the remaining food. -
Keep hands, hair, and clothing out of the container when loading and operating.
-
During operation and handling of the appliance, avoid contact with moving parts.
-
DO NOT use the appliance if the rotating sieve is damaged.
-
DO NOT operate the appliance without the pulp container in place.
-
DO NO T microwave container or accessories provided with the appliance.
-
NEVER leave the appliance unattended while in use.
-
DO NOT juice hot liquids. Doing so may result in pressure buildup and steam exposure that can pose a risk of the user being burned.
-
NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure attachments are properly installed before operation.
-
Before the operation, ensure all utensils are removed from the container. Failure to remove utensils can cause containers to shatter and potentially result in personal injury and property damage.
-
DO NOT attempt to remove the feed chute chamber from the motor base while the auger is still spinning. Allow the appliance to come to a complete stop before removing attachments.
-
If the appliance is overloaded, the unit will temporarily disable the motor. Wait approximately 2 minutes before using again.
-
DO NOT juice hot ingredients.
-
Remove the seeds and pits from such as mangoes or plums, as well as peels and tough skins from fruits such as oranges, lemons, and limes, as they could damage the unit.
-
DO NOT add water to the feed chute while the unit is operating to clean the unit.
-
DO NOT submerge the motor base or control panel in water or other liquids.
-
DO NOT spray motor base or control panel with any liquid.
-
DO NOT attempt to sharpen the auger.
-
Turn off the appliance and unplug the motor base before cleaning.
-
DO NOT add frozen fruit, frozen vegetables, or ice to the juicer.
-
Consumers with sensitivity to the pulp may wish to strain their juice as a precaution.
SAVE THESE INSTRUCTIONS
PARTS
To purchase more accessories and find great recipes, visit
ninjakitchen.com.
A Cleaning Brush
B Tamper
C Food Tray
D Feed Chute Chamber with Anti-Drip Lever
E Auger
F Black Filter (no pulp)
G Gray Filter (some pulp) (not available with all models)
H Orange Filter (lots of pulp)
I Pulp Spout
J Juice Jug
K Pulp Container
L Motor Base (power cord not shown)
| 
---|---
BEFORE FIRST USE
IMPORTANT: Review all warnings on pages 4–5 before proceeding.
NOTE: All attachments are BPA-free and dishwasher safe.
- Remove all packaging materials from the unit.
- Wash parts in warm, soapy, water, then thoroughly rinse and air-dry all parts.
- Wipe the control panel with a soft cloth. Allow it to dry completely before using.
FEATURES
USING THE CONTROL PANEL
|
START/STOP
Press once to start continuous running up to 12 minutes; press again to stop.
REVERSE
If the feed chute chamber becomes blocked or ingredients are not processing,
press and hold REVERSE. There will be a beep and a brief pause, then the auger
will rotate in the opposite direction. Release REVERSE to stop. Repeat as
needed. Press START/STOP to resume normal operation.
---|---
USING THE FILTERS FOR PULP CONTROL
Control the amount of pulp by choosing the desired filter.
USING
THE JUICER
IMPORTANT: Review all warnings on pages 4–5 before proceeding.
-
Plugin motor base and place on a clean, dry, level surface such as a countertop or table.
Align the metal portion of the filter with the bottom of the auger.
-
Insert the auger into the feed chute chamber, then attach the desired filter onto the auger, with the metal portion of the filter on the bottom of the auger.
-
Install the pulp spout in the feed chute chamber, on top of the filter, by installing at an angle then turning counterclockwise to lock in place.
-
Install the assembled feed chute chamber on the motor base at an angle, then turn counterclockwise until it clicks into place.
-
Install the food tray on the top of the feed chute.
Make
sure the anti-drip lever is open before juicing. -
Place the pulp container under the pulp spout, then place the juice jug under the anti-drip lever on the feed chute chamber.
IMPORTANT: DO NOT add frozen fruits and vegetables or ice to the unit.
NOTE: If the feed chute chamber becomes blocked or ingredients are not processing, press and hold REVERSE. There will be a beep and a brief pause, then the auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed. Press START/STOP to resume normal operation.
-
Select START/STOP, then gradually add ingredients to the feed chute. For best results, allow the juicer to process each ingredient before adding more to the feed chute. Use the tamper to push ingredients down through the feed chute, as needed.
-
When juicing is complete, select START/STOP, then close the anti-drip lever. Stir juice and serve.
-
To disassemble, press and hold the RELEASE button while turning the feed chute chamber clockwise and remove it from the motor base.
-
Remove the pulp spout from the feed chute chamber by turning clockwise Then, remove the filter and auger.
-
Unplug the unit when finished. Refer to the Care & Maintenance section for cleaning and storage instructions.
CARE & MAINTENANCE
CLEANING
IMPORTANT: DO NOT add water to the feed chute while the unit is operating
to clean the unit.
-
Hand-Washing
Separate all parts and wash in warm, soapy water with a soft cloth. Thoroughly rinse and air-dry all parts. -
Dishwasher
All parts, except the motor base, are dishwasher safe. -
Motor Base
Unplug the motor base before cleaning.
Wipe with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or brushes to clean the base. -
Using the Cleaning Brush
Use the included cleaning brush to clean hard-to-reach places, as well as remove excess residue.
Use
the end of the cleaning brush to clear any buildup left over after juicing.
Use
the bristle side of the cleaning brush to clean the filter, if needed.
STORING
For cold storage, wrap the cord with a hook-andloop fastener near the back of
the motor base.
DO NOT wrap the cord around the bottom of the base for storage.
Store the auger and filter assembled in the feed chute chamber with the pulp
spout installed. Place the juice jug into the pulp container for easy storage.
OVERLOADING THE UNIT
This unit features a unique safety system that prevents damage to the motor
and drive system should you inadvertently overload the motor. If the unit is
overloaded, the motor will be temporarily disabled.
Should this occur, wait 2 minutes, then press START/STOP to start the unit.
If your unit needs service, please call Customer Service at
1-877-646-5288.
So we may better assist you, please register your product online at
registeryourninja.com and have the product on
hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit
ninjaaccessories.com.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, unplug the
unit before troubleshooting.
The REVERSE program is not operating.
- After pressing and holding REVERSE, there will be a beep and a brief pause, then the auger will rotate in the opposite direction. Release REVERSE to stop. Repeat as needed.
Press START/STOP to resume normal operation.
There is a buildup of pulp in the feed chute chamber.
- There may be a clog in the pulp spout. Press START/STOP to stop the unit, then remove the pulp spout. Use the end of the cleaning brush to clear the clog, then reinstall the pulp spout to the feed chute chamber. Resume juicing.
- For best results, allow the juicer to process each ingredient before adding more to the feed chute. Use the tamper to push ingredients down through the feed chute, as needed.
The unit stopped working and is beeping.
- The unit was overloaded with ingredients. Wait 2 minutes then press START/STOP to start the unit.
Can I juice fruit with seeds and pits in it?
- No. Seeds and pits should be removed from the fruit prior to juicing. For example, remove the seeds from cherries and the pit from a plum.
Can I juice frozen fruits and vegetables or add ice?
- No, do not use frozen fruit, frozen vegetables, or ice with this unit.
The unit makes a squeaking noise when I juice certain ingredients.
- When the auger is breaking down fibrous ingredients like apples, celery, herbs, and leafy greens, the unit will sometimes make this noise. This is normal and not a cause for concern.
ONE (1) YEAR LIMITED WARRANTY
The One (1) Year Limited Warranty applies to purchases made from authorized
retailers of SharkNinja Operating LLC. Warranty coverage applies to the
original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when it is
used under normal household conditions and maintained according to the
requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
- The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
- In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
- Normal wear and tear of wearable parts (such as the filter, auger, juice jug, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
- Any unit that has been tampered with or used for commercial purposes
- Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
- Consequential and incidental damages.
- Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
- Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal
household conditions within the warranty period, visit
ninjakitchen.com/support for product care
and maintenance self-help. Our Customer Service Specialists are also available
at 1-877-646-5288 to assist with
product support and warranty service options, including the possibility of
upgrading to our VIP warranty service options for select product categories.
So we may better assist you, please register your product online at
registeryourninja.com and have the product on
hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for
repair or replacement. A fee of $19.95 (subject to change) will be charged
when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to
initiate a warranty claim. You will need the receipt as proof of purchase. We
also ask that you register your product online at
registeryourninja.com and have the product on
hand when you call, so we may better assist you. A Customer Service Specialist
will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not
apply to you.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen.com
Illustrations may differ from the actual products. We are constantly striving
to improve our products,
therefore the specifications contained herein are subject to change without
notice.
NINJA is a registered trademark of Shark Ninja Operating LLC.
For SharkNinja U.S. patent information, visit
sharkninja.com/uspatents/
© 2020 SharkNinja Operating LLC
PRINTED IN CHINA
@ninjakitchen
JC100Series.IB.MP.Mv9
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>