Green Feathers GFWF3GB-B01 Bird Box Camera User Guide
- June 4, 2024
- green feathers
Table of Contents
Green Feathers GFWF3GB-B01 Bird Box Camera
Installation Instructions
Before installing the camera, we recommend setting it up inside your house as a test run.
- Connect the camera to the male power jack on the end of the extension cable, then connect the yellow and white AV cables to the same colour ports on the camera.
- Connect the power supply to the female power jack at the other end of the extension cable. Remove the lens cap on the camera.
- Connect the yellow and white AV cables into the yellow and white ports on a TV, AV to HDMI adaptor, USB capture device or a recorder. If your TV has a yellow/green port, connect the yellow AV cable into that. If your TV does not have a yellow or yellow/green port, you will need to use an AV to HDMI adaptor or recorder.
For more information on setting up and using your camera visit: bit.ly/GFSD1Setup
References
- How to Set Up a Wired Bird Box Camera | Green Feathers Help
- Wireless Analogue Bird Box Camera - setup guide and troubleshooting (NC701G) | Green Feathers Help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>