Green Feathers NC701G Bird Box Camera with Wireless Transmission User Guide
- June 4, 2024
- green feathers
Table of Contents
Green Feathers NC701G Bird Box Camera with Wireless Transmission User Guide
Installations Instructions
Before installing the camera, we recommend setting it up inside your house as a test run, with the camera in a separate room to the receiver.
- Check the receiver is set to the same channel as the sticker on the camera, then connect the power supply to the camera.
- Connect the receiver to the power supply, then connect the yellow AV cable plug into VIDEO1 and the white one into AUDIO1. Remove the lens cap from the camera.
- Connect the yellow and white AV cables into the yellow and white ports on a TV, AV to HDMI adaptor, USB capture device or a recorder. If your TV has a yellow/green port, connect the yellow AV cable into that. If your TV does not have a yellow or yellow/green port, you will need to use an AV to HDMI adaptor or recorder.
For more information on setting up and using your camera: bit.ly/GFTX1Setup
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>