Pyle PLUTV52CH 2-Channel Outdoor Marine Wake tower Speakers USER GUIDE
- June 3, 2024
- Pyle
Table of Contents
Pyle PLUTV52CH 2-Channel Outdoor Marine Wake Tower Speakers
SPECIFICATION
- SPEAKER TYPE Polypropylene Cone, Butyl Rubber Surround (x2)
- MODEL NAME PLUTV52CH
- SPEAKER MAXIMUM OUTPUT POWER 120 Watts
- AUDIO OUTPUT MODE Stereo
- IMPEDANCE 4 Ohm
- PRODUCT DIMENSIONS 1 x 1 x 1 inches
- ITEM WEIGHT 5 pounds
- BRAND Pyle
- CONNECTIVITY TECHNOLOGIES RCA
- SPECIAL FEATURES Speakers
- OTHER DISPLAY FEATURES Wireless
- COLOR BLACK
**DIMENSION
**
**WHAT’S IN THE BOX
**
Waterproof Off-Road Speakers with Amplifier
1000W 2-Channel Outdoor Marine Wake tower Speakers Full Range
Pyle’s 1000W marine-grade off-road speaker kit is what you need to listen to high-quality audio on your boat, ATV, UTV, quad, Jeep, other outdoor vehicles! Includes (2) 5.25” 2-way off-road speaker system along with the marine amplifier
- Amplifier Technical Spec
- Amplifier Type: 2-Ch. Audio Component
- Power Output: 1000 Watt MAX
- 2 x 50 Watts RMS @ 4 Ohm
- 2 x 150 Watts MAX @ 4 Ohm
- Marine Grade IP-45 Rating
- Power: DC 12V
- Amp Dimensions (L x W x H): 6” x 3.86” x 2.36” – Inches
1000 – WATT POWER
The pair of Pro Audio Power Sport speakers feature a 1000W high-powered output. It has an impedance of 4 ohms and is equipped with an impressive bass response and integrated speaker wiring for quick connection
2-CHANNEL AMPLIFIER
The kit includes a 2-CH marine audio amplifier with wired RCA audio input which allows you to connect & stream audio from external devices. Features overload & power protection circuitry, anti-thump turn on & soft turn-on/off
FOR OFF-ROAD VEHICLES
This pair of compact speakers is designed to give your off-road experience an added thrill by adding music into every turn.
WEATHERPROOF DESIGN
The speakers feature marine-grade IP-X45 waterproof construction with weatherproof and water-resistant housing perfect for extreme water sports use. It has a sleek design and durable machine molded speaker cabinet housing
SPEAKER CONNECTIONS
Depending on the type and number of speakers used with the amplifier wire them to the speaker terminals as per the appropriate wiring diagram. For most applications #18 gauge wire should be used for the speaker leads but in no case thinner than #16 gauge. For leads is excess of 10 feet #12 gauge is recommended. When wiring the speakers, pay careful attention to the polarity of the terminals on the speakers and make certain they correspond to the polarity of the corresponding terminals on the amplifier. Do not ground any speaker leads to the chassis of the vehicle/or boat.
DESIGN
The speakers are protectively stored in a heavy-duty molded cabinet with a butyl rubber surround.
UNIVERSAL MOUNTING
Designed to be mounted on a support bar, frame, roll-bar / roll-cage. Includes speaker connection wire
PRODUCT DESCRIPTION
Features: – Waterproof Rated Speakers – Pro Audio Power Sports Amplifier System Kit – 2-Channel Marine Audio Amplifier – Marine Grade Rugged Construction – Waterproof Rated & Weather-Resistant Connectors – Integrated Power Wiring Harness – Perfect for Custom Installations & Applications – Ability to Connect & Stream Audio from External Devices – Wired RCA Audio Input – Speaker Wiring Connectivity – Anti-Thump Turn-On – Soft Turn On / Off – Overload & Power Protection Circuitry – Used for Watercraft & Portable Mobile Vehicle Sound Systems What’s in the Box: – (2) 5.25’’-inch Marine Speakers – (2) Speaker Connection Wires, 6.5′ ft. – (2) 1.75” Aluminum Mounting Brackets – (2) 2” Aluminum Mounting Brackets – (2) 6.5” x 0.95” x 0.67”Inches Rubber Pads – (2) 5.7” x 0.95” x 0.67”Inches Rubber Pads – (2) 6x50mm Hexagon Socket Head Cap Screws – (2) Stainless Steel Nuts – Compact Marine Amp – (4) Butt Connector 16-22AWG – Screw Bag – (4) Nylon Wire Straps Amplifier Technical Specs: – Amplifier Type: 2-Ch. Audio Component – Power Output: 1000 Watt MAX – 2 x 50 Watts RMS @ 4 Ohm – 2 x 150 Watts MAX @ 4 Ohm – Marine Grade IP-45 Rating – T.H.D:= 1% – S/N Ratio:= 80dB – Channel Separation:= 65dB – Amp Freq. Response:20Hz- 20 kHz – Fuse: 15A – Power: DC 12V – Amp Dimensions (L x W x H): 6” x 3.86” x 2.36” –inches Marine Speaker Technical Specs: – Power Output: 1000 Watts – Marine Grade Waterproof Rating: IP-X45 – Speaker Size: 5.25’’ -inch (Each) – Speaker Style: Passive Speakers – Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2) – Tweeter Type: Neodymium Dome (x2) – Impedance: 4 Ohm – Magnet Type: 24 oz. Circuit – Mid- Woofer Voice Coil Type: 1”, Aluminum – Sensitivity: 88 dB +/- 2 dB @ 1M/1W – Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.75’’ ~ 2.0’’ –inches – Speaker Dimensions: 6.5’’ x 7.1’’ x 9.5’’ -inches, with Bracket (-Each)
PRECAUTIONS
- This unit is designed for negative ground 12-14.50 Volts (DC) operation only.
- Use speakers with an impedance of 4 Ohms
- Avoid installing the unit where:
- It would be subject to high temperatures, such as from direct sunlight or hot air from the heater.
- It would be exposed to rain or moisture.
WARRANTY & SUPPORT
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
FAQs
Do Pyle PLUTV52CH marine speakers require an amplifier?
Amplification is a common feature of marine stereos, some of which are very potent. It is definitely possible to produce good sound without an external amplifier. Most individuals should test their stereo without an amplifier first as you can usually install one later.
What are the purposes of Pyle PLUTV52CH marine speakers?
The speakers that are best suited for usage in water are known as marine speakers. They are frequently water-resistant in addition to being more robust. The different exposures to moisture, climate, and weather are what marine speakers are made to withstand.
How durable are the Pyle PLUTV52CH marine speakers?
Speakers called “marine” are designed specifically for use aboard boats. They will survive the elements thanks to careful testing.
A Pyle PLUTV52CH two-way marine speaker is what?
Two-way, or coaxial, speakers contain a separate tweeter located inside the woofer in order to handle the high frequencies and faithfully recreate the sound range of your music. Three-way, or triaxial, speakers combine a midrange driver with a separate woofer and tweeter for more depth and realism.
Do Pyle PLUTV52CH marine speakers function in automobiles?
Absolutely, you can add marine speakers to your vehicle. It’s actually a lot of fun to do this because the quality can be so much higher and the music so much louder. There are a few things to consider first, though. The wiring on a boat will likely be very different from that in your car.
Are the Pyle PLUTV52CH marine speakers bass-friendly?
The maritime speaker provides an excellent full-range sound response between 80 Hz and 20 kHz and produces respectable bass performance.
How can I increase the volume of my Pyle PLUTV52CH marine speakers?
Because subwoofers are made to reproduce bass, the entire audio experience is immediately improved. They turn up the volume while also playing with additional intricacy. With a subwoofer, your boat speakers will be louder and more pleasurable.
What does Pyle PLUTV52CH maritime speaker stand for?
To be referred to as marine certified, a speaker must go through comprehensive maritime testing by the American Society for Testing and Materials. Here, salt fog and UV radiation are used to assess the durability of the speakers.
What distinguishes Pyle PLUTV52CH car speakers from marine speakers?
A marine speaker is designed to project and disperse sound over a broader area than a vehicle speaker does. Standard car speakers may not be able to project sound over a larger path because they are designed to do so in a limited, confined automotive space.
What qualities should a Pyle PLUTV52CH maritime stereo have?
Compared to a vehicle speaker, a marine speaker is made to project and spread sound over a larger area. Because standard car speakers are made to transmit music in a tiny, constrained car space, they may not be able to transmit sound across a larger distance.
What distinguishes Pyle PLUTV52CH maritime speakers from standard speakers?
The speakers that are best suited for usage in water are known as marine speakers. They are frequently water-resistant in addition to being more robust. The different exposures to moisture, climate, and weather are what marine speakers are made to withstand.
Do Pyle PLUTV52CH marine speakers require an amplifier?
Amplification is a common feature of marine stereos, some of which are very potent. It is definitely possible to produce good sound without an external amplifier. Most individuals should test their stereo without an amplifier first as you can usually install one later.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>