XOIL INSERT LINER XOIL4819KS User Manual

XOIL INSERT LINER XOIL4819KS

XOIL INSERT | LINER
MODELS XOIL4819KS

I worked really hard on this manual so please read it…

VENTILATION
When buying any XO appliance you can be confident you have chosen a high quality, innovative and stylish product from a company that cares about you! If you require service or have questions, there are 2 ways to contact our ventilation experts;
Online @ https://xoappliance.com/priority-service-for-your-xo-product/ Or by phone 973-403-8900
CONGRATULATIONS
on purchasing your XO. Before you proceed, take just a moment to register your XO at: www.xoappliance.com/register-your-product/
REGISTRATION HELPS YOU BY –
Ensuring warranty coverage should you need service Providing ownership verification for insurance purposes Let’s XO notify you in the event of product changes or recalls.
2

where things are

GETTING READY Safety and Precautions Planning Ductwork Install Examples Dimensions
THE INSTALL Mounting Height Top or Rear Exhaust Cut Out Dimensions Installing Electrical Connections
MAINTENANCE Filters Cleaning Light Replacement
OPERATING The Push Button Controls Synchronizing the Remote
PARTS & WARRANTY

4 – 11 12 – 17
18 – 19 20 21 – 23

please read and follow all safety instructions

It’s for your own good… Honest.

safety first
CAUTION – FOR RESIDENTIAL KITCHEN USE ONLY Do Not Use to exhaust hazardous or explosive materials or vapors. NEVER voids between walls. Ducted installation must exhaust outside. Recirculating installations must exhaust back into the living space.
WARNING: ELECTRICAL SAFETY This appliance must be connected to a properly grounded, dedicated 120v 60hz 15amp circuit by a qualified electrician in accordance with all applicable codes and regulations. Never use any external speed control device. Never use any extension cord or temporary wiring.
The appliance must be protected by a properly sized circuit breaker or time delay fuse.
CAUTION – DURING INSTALLATION All installation work and electrical wiring must be done by qualified people in accordance with all applicable codes and standards, including fire rated construction. (chimney) of the fuel burning equipment to prevent backdrafting. Follow the cooking equipment manufacturer’s guidelines and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) as well as all local code authorities.
WARNING: TO REDUCE RISK OF A RANGETOP GREASE FIRE: a. Never leave the cooking surface unattended. Boil overs, spills and splatter may ignite or create smoke. Heat oils slowly on low or medium heat settings. b. Always turn the hood on before you begin cooking. c. Clean the hood frequently. Keep filters, fans and surfaces free of grease. d. Use pan sizes appropriate for each burner.e.prepared. e. Use high heat only when necessary. f. Use cookware and utensils designed for the cooking style, type and amount of food.
4

safety first continued
5

safety first continued
6

safety first continued
7

a few simple rules to plan your ductwork
THIS HOOD IS DESIGNED TO USE AN 8″ ROUND DUCT IT MAY BE TRANSITIONED TO A 4″ X 14″ RECTANGULAR DUCT NEVER REDUCE DUCT SIZE. UNDERSIZED DUCTING SEVERELY RESTRICTS AIR FLOW AND HARMS PERFORMANCE. (Example: the area of an 8″ Duct is more than 75% larger than a 6″ Duct) KEEP DUCT RUNS AS SHORT AND STRAIGHT AS POSSIBLE. AVOID USING FLEXIBLE METAL DUCTING IF RUN IS LONGER THAN 6′. NEVER USE PLASTIC DUCTING. USE SMOOTH BORE METAL DUCTING. MINIMIZE THE NUMBER OF FITTINGS (see chart). WHEN YOU MUST USE FITTINGS, TRY TO SEPARATE THEM WITH SECTIONS OF 4′ OR MORE OF STRAIGHT DUCT. ALWAYS FOLLOW THE MANUFACTURER’S GUIDELINES FOR THE COOKING EQUIPMENT YOU ARE VENTING. IF MAKE UP AIR CONTROL DAMPERS ARE REQUIRED, POSITION THE SENSOR IN A STRAIGHT RUN OF DUCT IDEALLY WITH 4′ OF STRAIGHT DUCT BETWEEN EACH SIDE OF THE SENSOR AND A DUCT FITTING. REMEMBER TO INCLUDE POWER AND CONTROL WIRING FOR THIS IN YOUR PLANS. ADHERE TO ALL LOCAL BUILDING CODES AND ORDINANCES. USE THE WORKSHEET THAT FOLLOWS TO HELP CALCULATE THE TOTAL EQUIVILENT FEET OF YOUR DUCT RUN. TOTAL EQUIVILENT FEET SHOULD BE LESS THAN 100′.
5

estimating total equivalent feet in a duct

CAUSING AIR TO CHANGE DIRECTION CAUSES TURBULENCE AND RESTRICTS FLOW IN A SYSTEM. IF USING FLEXIBLE METAL DUCT – INCREASE ALL MULTIPLIERS BY 50% (12 BECOMES 18 – ETC.)
THIS EASY TO USE WORKSHEET IS FOR 1000 CFM OR LESS. UNDER “QTY USED” ENTER HOW OF EACH SECTION YOU WILL BE USING. IN THE FIRST TWO ROWS – ENTER HOW MANY FEET OF EACH TYPE OF STRAIGHT DUCT YOU WILL BE USING (I.E. FOR 20 FT ENTER 20, FOR 30′ ENTER 30). ENTER THE NUMBER OF EACH TYPE OF TURN YOU ARE USING AND THE TYPE OF END CAP. MULTIPLY ACROSS EACH ROW THE “MULTIPLIER” x “QTY USED” TO GET THE EQUIVALENT FEET FOR THOSE COMPONENTS. ADD UP ALL THE VALUES IN THE “EQUIVALENT FEET” COLUMN.

DUCT PIECE

DESCRIPTION

1′ of 8″ Round Duct

MULTIPLIER 1

QTY USED

EQUIVALENT FEET

1′ of 4″ x 14″ Rect. Duct

1

8″ 90 Degree Elbow

12

8″ 45 Degree Elbow

7

4″ x 14″ 90 Degree

14

4″ x 14″ 45 Degree

8

4″ x 14″ x 8″ Round

2

4″ x 14″ x 8″ Round 90 Degree

4

8″ Round Wall Cap w Damper

24

4″ x 14″ 90 Wall cap w Damper

24

8″ Round Roof Cap

33

TOTAL EQUIVALENT FEET SHOULD BE LESS THAN 100 6

typical installation examples

VENTED

WALL EXHAUST

ROOF EXHAUST

RECIRCULATION

SOFFIT EXHAUST

CABINET TOP EXHAUST

RECIRCULATION EXHAUST MUST BE RETURNED TO THE SPACE

7

dimensions
Front of hood
“A”

Side of hood
12”

12” 3”

“B”

19-1/4”

MODEL
XOIL48KS

DIM “A”
40-3/8”

DIM “B”
46-3/8”

Top of hood

Ø7-27/32″

5-31/32″

8

highs and lows
RECOMMENDED MOUNTING HEIGHT
ABOVE GAS COOKTOPS
27″ to 32″
All range hoods have a recommended range of installation height over the cooking surface. It is important to install the hood at the proper mounting height. Hoods mounted too low could result in heat damage and fire hazard; while hoods mounted too high will be hard to reach and will lose its performance and efficiency.
13

switching top and rear venting
TO CONVERT THE UNIT FROM TOP EXHAUST TO REAR EXHAUST FOLLOW THESE SIMPLE STEPS:
1. Unplug the quick disconnect coupling that supplies power to the motor.
2. Remove the eighteen (18) screws that fasten the blower assembly and filler plate to the hood.
180°
3. Remove the blower assembly and filler plate, invert 180o as shown and fasten in place using the eighteen (18) screws previously removed. 4. Reconnect the quick disconnect plug.
10

the cut out

19-7/16″

46-1/2″

To install the hood into a custom canopy or cabinet, refer to the cutout dimensions above for your particular model.

11

installation

B H B
4x

BEFORE FITTING THE HOOD INTO THE CABINET:

1. Remove the four (4) screws holding the side bracket (B) in place. Remove the brackets and set aside.

2x

2 Remove the two (2) screws holding the bracket (H) in place and tilt down.

H

12

installation continued
INSERT THE HOOD INTO THE CUTOUT
FASTEN THE HOOD IN PLACE Using four (4) screws along the inside front edge and four (4) screws in the back corners as shown
8x
13

1/4″
1- 1/8″

electrical connection
1. Route the power cord to the junction box inside the hood. 2. Using listed conduit fittings and connectors, connect the power supply to the box and each line to the appropriate wire following this color convention: BLACK = HOT LEG WHITE = NEUTRAL GREEN/YELLOW = GROUND Polarity must be observed. Unit must be properly grounded. Use a double throw disconnect switch. 3. Replace the box cover 4. Replace the Anti-grease Baffles. All wiring must be in compliance with nathional electrical code, ANSI/NFPA 70-1999 and all local codes and regulations.
14

maintenance
Regular cleaning and maintenance is the key to long life and peak performance of any equipment.
ANTI-GREASE BAFFLE FILTERS: Your XO hood is equipped with stainless steel pro- style baffle filters designed to capture grease from cooking. The baffles are easily removed for cleaning either by soaking in a warm, mild dish detergent solution, rinsing thoroughly and drying – or – by washing in your dishwasher.
TO REMOVE THE BAFFLES:
1. Pull down on the release latch (shown left)
2. Lower the front edge of the baffle
3. Pull forward and remove
4. To replace, insert the rear of the baffle, holding the latch open, swing the the front up into place and release the latch.
The importance of this simple process is essential for two reasons. First to help keep your kitchen clean and healthy, but it is also critical to minimize the risk of fire.
Baffle filters should be cleaned at least once every 2 months, more frequently depending on the type of cooking performed and the build up of grease.
CLEANING STAINLESS STEEL: Do not use corrosive detergents, abrasive detergents or oven cleaners. Do not use any product containing chlorine bleach or any product containing chloride. Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub in the direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent. After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster and grain. Always rub lightly, with a clean cotton cloth or a micro fiber cloth and buff in the direction of the stainless steel grain.
Any painted surfaces should be cleaned with warm water and detergent only.
15

maintenance continued
LED LIGHT REPLACEMENT The LED light modules are held in place by spring clips and pull down directly from the housing. Unplug the plastic molex connector. Plug in the new fixture and snap back into place.
16

easy to operate

Your XO range hood is controlled by these electronic push buttons which illuminate when activated.

BUTTON : Controls the LED lights. There are three illumination levels. Press the button Once for HIGH; Twice for MEDIUM; Three times for LOW; Four times for OFF.
BUTTON 0: Turns both the Blower and Lights On and Off
BUTTON 1: Blower motor operates on LOW speed.
BUTTON 2: Blower motor operates on MEDIUM speed.
BUTTON 3: Blower motor operates on HIGH speed.
POWER BOOST Press and Hold BUTTON 3 for 2 seconds. This will increase airflow to a fourth and even higher speed for 10 minutes. When activated the button will blink to alert you it is running. After 10 minutes the blower speed will return to its last setting. To manually stop the POWER BOOST before 10 minutes has elapsed: Press BUTTON 3 and it will revert to HIGH speed, or Press BUTTON 0 to shut the blower off completely NOTE: The POWER BOOST function will operate even when the hood is off.
BUTTON T: Activates and Deactivates the TIMER Function Pressing BUTTON T (whether the blower is off or running) will cause the motor to run at LOW speed for 5 minutes before shutting off the blower and lights automatically. While the TIMER is activated, you can change speed or engage POWER BOOST, the hood will still shut off after 5 minutes. To manually turn the the unit off before 5 minutes has elaped: Press BUTTON T or BUTTON 0.

OPTIONAL REMOTE CONTROL (purchased separately)
The remote control must be synchronized prior to use. To synchronize the remote control with the hood follow these simple steps:

1. Standing near the hood, while it is not running, press and hold BUTTON on the hood for 4 seconds -the button should start to blink for 5 seconds.
2. When the button on the hood starts to blink, Press any button on the remote. The hood and remote are now synchronized.

XOVREMOTE1

3. If the synchronization fails for any reason, repeat steps 1 &2

17

access parts & accessories
FILTERS REPLACEMENT LIGHTS
REMOTE CONTROLS REPLACEMENT SWITCHES
BLOWER MOTORS FAN WHEELS
ALL OF THESE PARTS AND MORE ARE AVAILABLE, SIMPLY VISIT WWW.XOAPPLIANCE.COM and click on PARTS STORE OR CALL US AT 973-403-8900
18

notes
19

we’ve got your back
90 DAY LOVE IT or LEAVE IT. For 90 Days all our products are backed by our unique Love it or Leave it Guarantee. TWO-YEAR PARTS & LABOR LIMITED WARRANTY. XO warrants to the original purchaser of every new XO ventilation unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit. XO’s obligation under this warranty is limited to a period of two (2) years from the date of original purchase.
WARRANTY CLAIMS. All claims for labor or parts must be made directly through XO. All claims should include: model number and serial number of cabinet, proof of purchase, and date of installation. In case of warranted compressor, the compressor model tag must be returned to XO along with the above listed information.
WHAT IS NOT COVERED BY THIS WARRANTY. XO’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty. Open box, factory seconds, scratch and dent, floor models and commercial applications are excluded from these warranties.
WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user at the original installation location. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, express or implied, including any warranty or merchantability or fitness for a particular purpose.
IMPROPER USAGE. XO assumes no liability for parts or labor coverage for component failure or other damages resulting from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided with the unit. ALTERATION OR NEGLECT. XO is not responsible for the repair or replacement of any parts that XO determines have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.
IMPROPER ELECTRICAL CONNECTIONS. XO is not responsible for the repair or replacement of failed or damaged components resulting from electrical power failure, high or low voltage, use of extension cords, or improper grounding of the unit.
YOUR RIGHTS UNDER STATE LAW. This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you.
OUTSIDE U.S. This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside the 48 continental United States.
To obtain ser vice: Call 973-403-8900 |email service@xoappliance.com | or submit a request on our website www.xoappliance.com
2
PARTS + LABOR
WARRANTY
XOIL30MANUAL2020 20

YEAR

XO APPLIANCE | 24 EISENHOWER PARKWAY | ROSELAND, NJ 07068

www.xoappliance.com

p. 973.403.8900

References

• XO Appliance | The Next Level in Luxury Appliances
• Product Registration | XO Appliance
• Priority Service for your XO Product | XO Appliance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>