V-TAC VT-789 Spotlight Fitting Installation Guide
- June 6, 2024
- V TAC
Table of Contents
V-TAC VT-789 Spotlight Fitting Installation Guide
TECHNICAL DATA:
INSTALLATION DIAGRAM:
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
INSTALLATION INSTRUCTION
- Switch off the power.
- Install the GU10 lamp into the fixture (Pic 2).
- Drill appropriate holes on the ceiling to fix the plastic toggle wings. Fix the bracket on ceiling with screw solidity. (Pic 3).
- Connect L& N wire in the ceiling to the respective wires on the fitting. (Pic 4).
- Install the lamp body into the bracket and tighten the screw safely and solidary. (Pic 5).
- Switch on the power if above steps done properly without any mistakes.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers. V-TAC EUROPE LTD
Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>