HENDI 210864 400W Meat Mincer User Manual

: June 6, 2024
: HENDI

Table of Contents

Meat Mincer
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Meat Mincer

210864
User manual

You should read this user manual carefully before using the appliance.

Keep this manual with the appliance.
For indoor use only.

Dear Customer,
Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very carefully.

1. PRODUCT DESCRIPTION

Food dish
Hopper plate
Body
Fasten button
Switch
Kibbe attachment
Head inlet
Sausage attachment (block)
Sausage attachment (fine)
Sausage attachment (medium)
Sausage attachment (large)
Food pusher
Head
Snake
Cutting plate (fine)
Cutting plate (medium)
Fixing ring
Cutting plate (large)
Cutting blade

2. SAFETY REGULATIONS

Incorrect operation and improper use of the appliance can seriously damage the appliance and injure users.
The appliance may only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Keep the appliance and electrical plug away from water and any other liquids. In the unlikely event that the appliance should fall into water, immediately pull the plug out of the socket and have the appliance checked by a certified technician. Not following these instructions could give rise to life-threatening situations.
Never try to open the casing of the appliance yourself.
Do not insert any objects in the casing of the appliance.
Do not touch the plug with wet or damp hands.
Regularly check the plug and cord for any damage. Should the plug or cord be damaged have it/them repaired by a certified repair company.
Do not use the appliance after it has fallen or is damaged in any other way. Have it checked and repaired, if necessary, by a certified repair company.
Do not try to repair the appliance yourself. This could give rise to life-threatening situations.
Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. To pull the plug out of the socket, always pull on the plug and not on the cord.
Make sure that no one can accidentally pull the cord (or extension cord) loose or trip over the cord.
This appliance may only be used for the purpose it was initially designed for.
Always keep an eye on the appliance when in use.
Children do not understand that incorrect use of electrical appliances can be dangerous. Therefore, never let children use home appliances without supervision.
Always pull the plug out of the socket when the appliance is not being used and always before cleaning.
Warning! As long as the plug is in the socket the appliance is connected to the power source.
Turn off the appliance before pulling the plug out of the socket.
Never carry the appliance by the cord.
Do not use any extra devices that are not supplied along with the appliance.
Only connect the appliance to an electrical outlet with the Voltage and frequency mentioned on the appliance label.
Avoid overloading.
Turn off the appliance after use by removing the plug from the socket.
Always remove the plug from the socket when filling or cleaning the appliance.
The electrical installation must comply with the applicable national and local regulations.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

It is for household use and semi-professional: Do not use outdoors.
Unplug from outlet while not in use, before putting on or taking off parts, and before cleaning.
Unplug when assembling and disassembling the unit.
Close supervision is necessary when any appliance is used near children.
When carrying the unit be sure to hold the body with both hands. Do not carry the unit by the hoppper plate or head.
Do not fix the cutting blade and cutting plate when using kibbe attachment.
Never push products by hand. Use food pusher.
Do not grind hard food such as bones, nuts, etc.
Do not grind ginger and other materials with hard fiber.
Continuous running of meat grinder should be not more than 10 minutes with the following 10 minutes interval for motor cooling.
Operate the unit from “ON” to “R” or from “R” to “ON” after the previous working condition stops more than 30 seconds, or it may cuase some unnormal case such as moving up and down and easily destroy the unit.
To avoid jamming, do not force to operate the unit with excessive pressure.
When the circuit breaker activates, do not switch on.
Never try to replace the parts and repair the unit by yourself.
Do not immerse cord or the body of mixer into water as this would give rise to electric shock.
This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the appliance.
Do not operate this appliance if the cord or plug is damaged. Return it to the store of service or repair by professional serviceman.

4. FOR THE FIRST TIME

Check that voltage indicated on the rating label corresponds the mains voltage in your home.
Wash other parts except body(motor housing) in warm soapy water.
Before plug in, make sure the key switch in the “OFF” position, that is the natural state of all keys.

5. INSTRUCTION FOR USE

5.1. ASSEMBLING

Due to unintended starting up of the KS100E EN
Place grinder/feeder head tightly into attach-
ment opening (fig.1). Holding head with one hand, place locking knob into the hole on the side of the motor housing and tighten knob by turning clockwise (fig.2).
Place the snake into the head, long end first, and turn to feed the screw slightly until it is set into the motor housing (fig.3).
Place the cutting blade onto the snake shaft with the blade facing the front as illustrated (fig.4). If it is not fitted properly, meat will not be grinded.
Place the desired cutting plate next to the cutting blade, fitting protrusions in the slot (fig.5).
Support or press the centre of the cutting plate with one finger then screw the fixing ring tight with another hand (fig.6). Do not over tighten.
Place the hopper plate on the head and fix it into position.
Locate the unit on a firm place.
The air passage at the bottom and the side of the motor housing should be kept free and not blocked.

5.2. MINCING MEAT

Cut all foods into pieces (Sinewless, boneless and fatless meat is recommended, approximate size: 20 mm x 20 mm x 60 mm) so that they fit easily into the hopper opening.
When cutting the meat, press small switch in the back “ON” position, and then press “ON” on the front panel.
MUST MAKE SURE THAT BOTH “ON” POSITION, THEN THE MEAT GRINDER START TO WORK.
Feed foods into the hopper plate. Use for it only the food pusher (fig.7)
After using, Press”O”to let appliance to stop, then pull plug out.

5.3. REVERSAL FUNCTION

If blockade is happened, use “REVERSE” function to pull out the meat. Firstly press the small switch “R” position, and then press the big “R” knob for several seconds, then the meat will be pull out.
After unblocking, release”R” ,and pull plug out, then clean food out from head of appliance.

6. MAKING KIBBE

screw cap RECIPE
STUFFING
Mutton 100 g
Olive oil 1 1/tablespoons
Onion (cut finely) 1 1/tablespoons
Spices to your taste
Salt to your taste
Flour 1 1/tablespoons

Mince mutton once or twice.
Fry onion until brown and add minces mutton, all spice, salt and flour.

cylindrical outlet OUTLET COUVER

Lean meat 450 g
Flour 150-200 g
Spices to your taste
Nutmeg (cut finely) 1
Powdered red pepper to your taste
Pepper to your taste

Mince meat three times and mix all ingredients together in a bowl. More meat and less flour for outlet cover create better consistency and taste.
Grind the mixture three times.
Disassemble by reversing the steps from 5-3 to remove the cutting plate and cutting blade.
Place kibbe attachments A and B onto the feed screw shaft together, fitting protrusions in the slots (fig.8).
Screw cap into place until tight. Do not over tighten (fig.9).
Make the cylindrical outlet cover (fig.10). · Form kibbe ad illustrated below and deep fry.

7. MAKING SAUSAGE

Before starting please assemble sausage attachment as per following (fig.11)

8. CLEANING AND MAINTENACE

8.1. DISADDEMBLING

Make sure that the motor has stopped completely.
Disconnect the plug from the power outlet.
Disassemble by reversing the steps from 1-6 pictures.
To remove the cutting plate easily, place a screwdriver between the cutting plate and the head as illustrated and lift it up (fig.12).
Press the fasten knob, move the head as per direction illustrated on fig 13, then you can take out the head.

8.2. CLEANING

Remove meat, etc. Wash each part in warm soapy water.
A bleaching solution containing chlorine will discolor aluminum surfaces.
Do not immerse the motor housing in water, but only wipe it with a damp cloth.
Thinners and petrol will crack or change the color of the unit.
Wipe all the cutting parts by vegetable oil-wet cloth.
Do not wash aluminum components in the dishwasher!

9. SPECIFICTION

Dimensions 275x190x(H)347 mm
Power supply 400 W
Voltage 220-240 V AC, 50/60 Hz
Net/Gross weight 5.2 Kg/5.8 Kg

10. WARRANTY

Any defect affecting the functionality of the appliance that becomes apparent within one year after purchase will be corrected by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was bought and include proof of purchase (f.e. receipt).
In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.

11. DISCARDING & ENVIRONMENT

At the end of the life of the appliance, please dispose of the appliance according to the regulations and guidelines applicable at the time.

Throw packing materials like plastic and boxes in the appropriate containers.

Hendi B.V. Steenoven 21 3911 TX Rhenen, The Netherlands Tel: +31 (0)317 681 040 Email: info@hendi.eu
Hendi Polska Sp. z o.o. ul. Firmowa 12, Robakowo 62-023 Gdki, Poland Tel: +48 61 6587000 Email: info@hendi.pl
Hendi Food Service Equipment GmbH Gewerbegebiet Ehring 15 5112 Lamprechtshausen, Austria Tel: +43 (0) 6274 200 10 0 Email: office.austria@hendi.eu
Hendi Food Service Equipment Romania Srl Str. 13 decembrie 94A, Hala 14 Braov, 500164, Romania Tel: +40 268 320330 Email: office@hendi.ro

PKS Hendi South East Europe SA 5 Metsovou Str. 18346 Moschato, Athens, Greece Tel: +30 210 4839700 Email: office.greece@hendi.eu
Hendi HK Ltd. 1208, 12/F Exchange Tower 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852 2154 2618 Email: info-hk@hendi.eu
Find Hendi on internet: www.hendi.eu www.facebook.com/HendiToolsforChefs www.linkedin.com/company/hendi-food-service-equipment-b.v. www.youtube.com/HendiEquipment

– Changes, printing and typesetting errors reserved.
© 2020 Hendi BV Rhenen – The Netherlands