WanWayTech GPS Tracker G19H User Manual
- June 6, 2024
- WanWayTech
Table of Contents
G19H
USER MANUAL
Thank you for choosing WanWayTech GPS Tracker. The instruction manual will explain in detail how to operate this device. Please read it carefully before installation. We reserve the right to change the appearance, color, and accessories of this product without prior notice.
Functions and Parameters
1.1 Functions
Location check, geofence, track playback.
1.2 Parameters
Parameter
|
Description
---|---
GPS chip| MTK6261D
Dimension| 72(L)30(W)12(H)
GSM frequency| 850/900/1800/1900MHZ
GPRS| Class12.TCP/IP build in GSM Module
Chanel| 20
Acquisition sensitivity| -144dBm
Tracking sensitivity| -160dBm
Voltage input| 9~90V
Working temperature| -20°C to 60°C, can work 4 hours under 80°C
Locating time| Hot＜2SEC(Open Sky)
Warm＜15SEC
Cold＜38SEC(Open Sky)
GSM antenna| Antenna spring
GPS antenna| Built-in 18mm18mm4mm ceramic chip antenna
SOS button| NO
Power button| YES
Vibration sensor| YES
Oil/electricity Cut off| YES
Microphone| NO
ACC detection| YES
Power status indication light| RED
GPS light| BLUE
GSM light| GREEN
Built-In Battery| YES
Battery Capacity| 55mA
Data uploading port| NO
Function port| NO
Software specification ：
Parameter| Description
Parameter setting| SMS, Platform
GPRS uploading interval| 10 seconds
Working mode| Always connect to be online
Remotely voice monitoring| NO
Third-party query| WEB/APP
SOS button| NO
GEO-FENCE| YES
Remotely cut off power| YES
Cut wire alert| YES
Vibration alert| YES
Remotely hardware status checking| GPS location status(Backend showing)
GSM signal strength (Backend showing)
Accessories and LED working status
2.1Accessories:
Standard Packing: Device+Manual+Warranty Card
2.2 LED working status
Red LED light (Power Supply Status)
| Status | Meaning |
|---|---|
| Slow Blink | Normal(Internal battery supply) |
| Long Bright | Normal(Internal battery supply) |
| Off | Broken or Sleeping |
Yellow LED light (GSM Status)
| Status | Meaning |
|---|---|
| Quick Blink | Searching GSM Signal |
| Slow Blink | Normal Working |
| Off | GSM Searching Failed or Sleeping |
Blue LED light (GPS Status)
| Status | Meaning |
|---|---|
| Quick Blink | Searching GSM Signal |
| Slow Blink | Normal Working |
| Off | GSM Searching Failed or Sleeping |
Installation instructions
3.1 Preparations before installation:
- Open the box and check whether the equipment model is correct and the accessories are complete, otherwise please contact your supplier;
- SIM card selection, the terminal needs to insert a SIM card with normal internet services.
Notes :
- Please disconnect the power of the terminal before installing or removing the SIM card;
- SIM card needs to enable GPRS function；
- The SIM card needs to enable the caller ID display function;
- Please make sure the SIM card is a service.
3.2 Instruction
TroubleShooting
After the terminal is installed for the first time, it has been unable to
connect to the background server, and the device is not online. Please check
the terminal installation:
Please refer to the following problems and solutions to do troubleshooting; if
the problem still cannot be solved, please contact your supplier.
| Common issues | Description | Solutions |
|---|---|---|
| Poor signal | Device is under poor signal areas like the basement and tunnels. |
Move to open sky areas
Platform showing Inactive| SIM Card not inserted properly| Yellow light long
bright; Check SIM Card
LED Status| Check LED blinking status
| SIM Card not enabled with GPRS functions| Contact SimCard provider
---|---|---
Wrong Location| GPS not located| Move to open sky areas
Vehicle keeps showing static| Drive out to the open sky area and test
Platform showing offline| SIM Card problem| Check SIMCard status
Poor signal| Move to open sky areas
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>