axis APS401W 12/24V Wireless 4 Sensor Instruction Manual
- June 6, 2024
- AXIS
Table of Contents
JAPAN QUALITY
APS401W
12124V Wireless Parking Sensor System
WIRING DIAGRAM
The two outer sensors start detecting at Zone B.
TECHNICAL SPECIFICATION
DESCRIPTION | MIN | SPEC | MAX |
---|---|---|---|
Power voltage (V DC) | 10 | 35 | |
Operating current (mA) | 150 | ||
Operating temperature °C | -20 | 80 | |
Operating frequency (kHz) | 39.3 | 40.7 | |
Horizontal detection angle | 120° | ||
Vertical detection angle | 60° | ||
Distance detection accuracy (cm) | 10 | ||
Detection range (m) | 0.05 | 2.5 | |
Buzzer sound volume (dB) | 75 | 105 |
DETECTION ZONES
DISPLAY | SOUND |
---|---|
ZONE A: 1.5 – 2.5m | ZONE A: 1.5 – 2.5m |
Number Only | None |
ZONE B: 1 – 1.5m | ZONE B: 1.2 – 1.5m |
Green | 2 beeps per second |
ZONE C: 0.5 – 1m | ZONE C: 0.9 – 1.2m |
Amber | 3 beeps per second |
ZONE D: 0 – 0.5m | ZONE D: 0.6 – 0.9m |
Red | 4 beeps per second |
ZONE E: 0.3 – 0.6m |
5 beeps per second
ZONE F: 0 – 0.3m
Constant tone
SENSOR
18.8mm Rubber Angled Sensor
UNDER MOUNTS
Under-Mount Brackets and Spacers
DISPLAY
FEATURES
-
Wireless range up to 30m.
-
Towbar / Spare Wheel detection zone.
-
Suitable for flush mounting into metal bumpers and underbody/tray mounting.
-
System Self-Checking Function – On start-up, the system will beep twice;
If there is any faulty sensor, the system will beep once. -
IP69K Control Box & IP68 Sensors and Connectors.
-
E-Mark certified.
TROUBLE-SHOOTING GUIDE
PROBLEM| CAUSE|
SOLUTION
---|---|---
The system fails to start when the reverse gear is engaged| Wrong connection
of power lead| Check the power lead
Wrong jack connection| Check the connectors
The system always detects the same distance| The sensor detects the ground|
Check and adjust the vertical sensor angle
The system fails to detect the obstacles| Wrong sensors connection| Check and
reset the system
False alarm| The sensor detects the ground| Check and adjust the vertical
sensor angle
SPECIAL NOTES
| When
the car approaches a smooth slope, the slope may not be detected.
---|---
| The
sensors may not detect a small or smooth round pole.
|
Point A will be detected prior to point B, as it comes closer.
|
However, point A may fall into the sensors’ blind zone, and point B cloud is
misjudged as the closest point.
| The
sensors may not detect any sponge-like material obstacle as the ultrasonic
wave was absorbed.
|
Complex situation: point A may not be detected.
SPECIFICATIONS
GENERAL
– Detection Range:| 0.05- 2.5m
– Rated Voltage:| 12/24V DC
– Operating Range:| 9-32V DC
– Operating Current:| 150mA@ 12V
LED DISPLAY
NAME?| Visual Direction & Indicators
– Audiable Buzzer:| Yes
– Mute Function:| Yes
– Buzzer Cable Length:| 1.5m
– Dimensions:| 99Wx 20H x 28Dmm
CONTROL BOX
NAME?| IP69K
– Wireless Range:| Wireless Range: Up to 30m
– Ignore Function:| Towbar / Spare Wheel
– Power Leads:| 1.4m
SENSORS
– Sensor Type:| Angled Rubber
– Sensor Size:| 18.8mm
– Sensor Dimensions:| 26W x 26H x 24.5Dmm
– Sensor Cable Length:| 2.5m
– Sensor Installation:| Under Mount or In-Bumper Mount
– Detecting Distance:| 0.05-2.5m
– Ultrasonic Frequency:| 40KHz
– Working Temperature:| -20° to +80C
NAME?| IP68
– Under Mount Dimensions:| 65W x 30H x 24.5Dmm
INCLUDES
Control Box
4xSensors
4 x Bracket with Pads
4 x 2.5 Sensor Cable
Wireless Display
Drill Bit
WARRANTY
Congratulations on your purchase of a quality Mobile
Safety System! You’re joining thousands of satisfied customers who enjoy &
experience the benefits of the products we distribute. In the unlikely event
that some technical difficulty arises with your purchase, be assured that we
are most anxious to see that the problem is quickly rectified to your
satisfaction. Please familiarise yourself with the following simple conditions
of our warranty.
This warranty covers faults through component failure or failure of the
product to operate in accordance with published specifications. Product
failure as a result of reasonable environmental conditions, accident, misuse,
improper installation, unauthorized repair, vehicle electrical or wiring
faults or neglect etc, will not be covered by this
warranty. Removal and installation costs, if any, would be paid by the owner
as well as any freight or postage costs of transporting the product to
AudioXtra. AudioXtra shall not be liable or responsible for any loss or use of
this product or any form of consequential loss.
CONSUMER WARRANTY
This product is warranted by AudioXtra Pty Ltd to be free from defects in
materials and workmanship under NORMAL USE for a period of TWENTY FOUR
MONTHS from the date of purchase.
WITHIN 30 DAYS OF PURCHASE DATE:
Please return the unit for a replacement to our National Service Centre or the
Retailer from where you made the purchase. All accessories must be included.
Proof of purchase date must accompany the products.
AFTER 30 DAYS OF PURCHASE DATE:
Warranty repair and service is carried out by our National Service Centre.
Repair and service will be carried out at no cost to the owner if proof of
ownership and the date of purchase can be verified to the satisfaction of the
authorized center concerned with this repair. This proof should take the form
of either:
a) The warranty card accompanying this product, stamped and dated by the
dealer.
b) A Tax Invoice or Receipt showing full details of the original vendor,
purchaser, model number, and serial number.
COMMERCIAL WARRANTY
A product used in or associated with a commercial application will carry a
limited SIX MONTH warranty. An abnormal commercial application is one where
usage, dust, vibration, heat/cold, and other environmental conditions exist at
an extreme level.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
Please complete the details below in the event of warranty service being
required.
Purchaser’s Name:|
---|---
Purchaser’s Address:|
Model Number:| APS401W
Dealer Name:|
Serial Number:|
Date of Purchase|
Dealer Address:|
Invoice/Sales Docket no:|
General Hints: To expedite service and prompt return of the equipment, please:
a) Clearly describe the fault in detail
c) Include your return address | b) Safely and securely pack the unit for
transport
d) Provide proof of purchase date as outlined above
National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204
email: services@audioxtra.com.au
PTY LT
D
audioxtra.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>