Rowlett Toaster Instruction Manual

: June 6, 2024
: Rowlett

Table of Contents

Safety Tips
Introduction
Pack Contents
Operation
Cleaning, Care & Maintenance
Troubleshooting
Technical Specifications
Electrical Wiring
Compliance
DECLARATION OF CONFORMITY
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Rowlett Toaster

Safety Tips

Position on a flat, stable surface. · A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any components on this product.
Consult Local and National Standards to comply with the following: – Health and Safety at Work Legislation
– BS EN Codes of Practice
– Fire Precautions
– IEE Wiring Regulations
– Building Regulations
Caution: Hot surfaces!
DO NOT touch the top and sides of the appliance when in use.
Danger of burns!
DO NOT immerse the appliance in water.
DO NOT obstruct or cover the appliance in any way when in use.
DO NOT insert any metallic objects in to the appliance when connected to a power supply.
DO NOT leave the appliance unattended during operation. · Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or carrying out maintenance.
Always switch off and disconnect the power supply to the appliance when not in use.
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities.
If the power cord is damaged, it must be replaced by a Rowlett agent or a recommended qualified technician in order to avoid a hazard.
DO NOT use if damaged.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Keep the appliance and its cord out of reach of child less than8 years.
This appliance is not intended to be operated by means of an external timer or separate remote-control system.
Fire hazard! Bread can burn! The appliance should not come into contact or be covered with easily flammable materials, like curtains, textiles, walls and the like. Always ensure sufficient safety distance to flammable materials.
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
Rowlett recommend that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing.
Rowlett recommend that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your Rowlett product.

Engineered for reliability, Rowlett toaster range enjoys huge success in pubs, restaurants, leisure outlets, hotels, institutions and caring establishments. Select from a wide choice of Bread toasters available with variable settings for toasting perfection.

Pack Contents

The following is included:

Toaster
Instruction manual

Rowlett prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage.

Should you find any damage as a result of transit, please contact your Rowlett dealer immediately.

Operation

Toasting

Remove the appliance from the packaging. Make sure that all protective plastic film and plastic coatings are thoroughly removed from all surfaces.
Ensure the Timer knob is set to `OFF’.
Note: There is no separate on/off switch on the toaster as it forms part of the timer mechanism. Your toaster is “off” when the timer knob is set to “OFF”. Ensure your toaster is plugged in before turning it on.
The slot selector knob is used to determine which slots are energised.
Note: All Rowlett toasters (excluding 2-slot toasters) have a slot selector knob that enables you to control which slots are in use, saving on element wear and electricity.
Choose how many slots you need and adjust the selector knob accordingly. Slots are energised from the left.
Load bread into toaster with ejector lever up. Lower to toast. Do not use bread that is too thick. 5. Set the timer knob to desired time setting according to your taste. It is better to use 1 day old bread. 6. The power indicator light will illuminate and the timer will start. 7. Power will be automatically turned off shortly before the timer completes its task. 8. The toast can be removed immediately by using the ejector lever, or left in the machine to keep warm for several minutes.

Cleaning, Care & Maintenance

Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or performing maintenance.

If necessary wipe the exterior with a soft cloth and warm soapy water.
Never use a scouring agent as this will scratch the finish.
Dry thoroughly after cleaning.

Crumb Tray

Periodically empty the crumb tray (located at the bottom of the appliance).
Slide the tray out to empty.
Slot back in securely when replacing the tray.

Notes on maintenance

Bread containing fruit or nuts can be toasted but natural sugars present may cause them to stick to the guard rails on your toaster. Such debris should not be left on the guard rails as it will char and possibly smoke and can swell so as to damage the element.
Elements wear out with use and it is impossible to predict their life as this is affected by the amount and type of use and the quality of electrical supply. They can easily be damaged by careless handling. Your toaster has been designed that should anything go wrong all major components such as elements and switches can easily be replaced.
Repairs or replacement of components should be undertaken only by a competent electrician.
All components and fitting instructions can be obtained from your supplier.

Troubleshooting

If your Rowlett appliance develops a fault, please check the following table before making a call to the Helpline.

Fault	Probable Cause	Solution
The unit is not working	The unit is not switched on	Check the unit is

plugged in correctly and switched on
Plug and lead are damaged| Call Rowlett agent or qualified technician
Fuse in the plug has blown| Replace the plug fuse
Power supply| Check power supply
Internal wiring fault| Call Rowlett agent or qualified technician
Heating element has expired| Call Rowlett agent or qualified technician

Technical Specifications

Model| Voltage| Power| Number of Bread slot| Dimensions H x W x D mm| Weight
---|---|---|---|---|---
DA205| 220-240V~, 50/60Hz| 1800W| 4| 210 x 410 x 210| 6.0kg
DA206| 220-240V~, 50/60Hz| 2600W| 6| 210 x 500 x 210| 8.0kg
DR061| 220-240V~, 50/60Hz| 1000W| 2| 200 x 310 x 210| 4.55kg
DR063| 220-240V~, 50/60Hz| 1000W| 2| 200 x 310 x 210| 4.55kg
DR065| 220-240V~, 50/60Hz| 1000W| 2| 200 x 310 x 210| 4.55kg
CY995| 220-240V~, 50/60Hz| 1000W| 2| 200 x 310 x 210| 4.55kg
DR066| 220-240V~, 50/60Hz| 1800W| 4| 200 x 400 x 210| 6.2kg
DR068| 220-240V~, 50/60Hz| 1800W| 4| 200 x 400 x 210| 6.2kg
DR070| 220-240V~, 50/60Hz| 1800W| 4| 200 x 400 x 210| 6.2kg
CY994| 220-240V~, 50/60Hz| 1800W| 4| 200 x 400 x 210| 6.2kg
DR071| 220-240V~, 50/60Hz| 2600W| 6| 200 x 530 x 210| 7.9kg
DR073| 220-240V~, 50/60Hz| 2600W| 6| 200 x 530 x 210| 7.9kg
DR075| 220-240V~, 50/60Hz| 2600W| 6| 200 x 530 x 210| 7.9kg
CY996| 220-240V~, 50/60Hz| 2600W| 6| 200 x 530 x 210| 7.9kg
DL277| 220-240V~, 50/60Hz| 1800W| 4| 210 x 400 x 210| 6.8kg
DA221| 220-240V~, 50/60Hz| 1800W| 4| 210 x 400 x 210| 6.8kg
DA222| 220-240V~, 50/60Hz| 1800W| 4| 210 x 400 x 210| 6.8kg
DA223| 220-240V~, 50/60Hz| 1800W| 4| 210 x 400 x 210| 6.8kg
DL278| 220-240V~, 50/60Hz| 2600W| 6| 210 x 500 x 210| 8.5kg

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:

Live wire (coloured brown) to terminal marked L
Neutral wire (coloured blue) to terminal marked N
Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed.

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Rowlett parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.

Rowlett products have been approved to carry the following symbol:

DECLARATION OF CONFORMITY

Equipment Type	Model
	2 Slot

EN 60335-1:2012 +A11:2014 +A13:2017
EN 60335-2-9:2003 +A1:2004 +A2:2006 +A12:2007 +A13:2010 +AC:2012 EN 62233:2008

Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU – recast of 2004/108/EC

EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013

Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to Directive 2011/65/EU

| Rowlett

I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s) and Standard(s).

Date	28th September 2020
Signature	![](https://manuals.plus/wp-
content/uploads/2021/11/Screenshot_11-79-300x134.png)

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Rowlett.
Every effort is made to ensure all details are correct at the time of going to press, however, Rowlett reserves the right to change specifications without notice.