Rowlett DE401 Milk Frother Instruction Manual

Rowlett DE401 Milk Frother

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product.
• Consult Local and National Standards to comply with the following:
  • Health and Safety at Work Legislation
  • BS EN Codes of Practice
  • Fire Precautions
  • IEE Wiring Regulations
  • Building Regulations
• Ensure the milk level is between the ‘MIN’ and ‘MAX’ marks.
• Keep hands and utensils away while use to reduce the risk of severe personal injury or damage to the appliance.
• Always ensure to use the appliance with cover in place.
• Only use the power base supplied with the appliance.
• Never use accessories which are not recommended by the manufacturer. They could pose a safety risk to the user and might damage the appliance. Only use original parts and accessories.
• NEVER operate an empty appliance to avoid any damage to the heating elements.
• Be cautious when moving the appliance with hot liquid inside.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a Rowlett agent or a recommended qualified technician in order to avoid a hazard.
• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised.
• Keep the appliance and its cord out of reach of children aged less than 8 years.
• Children shall not play with the appliance.
• DO NOT immerse the appliance in water.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments.
• Do not touch the hot surface. Hold the appliance by its handle only.
• Rowlett recommend that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing.
• Rowlett recommend that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your Rowlett product.
The appliance is only intended for frothing and heating milk. Do not use it for anything other than intended use.

Pack Contents

The following is included:

• Milk frother
• Power base
• Instruction manual

Rowlett prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Rowlett dealer immediately.

Before first time use

1. Clean the appliance thoroughly (See section “Cleaning, Care & Maintenance”).

2. Get to know the paddles:

3. Get to know the milk level marks:
   Maximum capacity for heating milk: 300ml

Operation

Note for all functions:
Ensure to let the appliance rest for a Minimum of 3 minutes between two consecutive cycles, or the appliance will enter self-protection state automatically after working for 5 cycles continuously. The working indicator will flash and the motor will not run. After about 5 minutes, the appliance will enter standby and be ready for use again.

Frothing and heating function

1. Remove the jar from the base.

2. Open the cover. Then mount the frothing paddle onto the shaft inside the jar.

3. Fill the jar with milk below the “MAX” mark (150ml). Then close the cover.

4. Place the jar on the base then connect jar to a mains power supply.

5. Press the heating button once. The heating indicator light turns On and the appliance starts to work.
   Note: If desired, you can press the heating button again to halt operation.

6. Once completed, the appliance stops working automatically.

Frothing only function

1. Repeat the steps 1-4 as in section “frothing and heating function”.

2. Press the frothing button . The frothing indicator light turns On and the appliance starts to work.
   Note: If desired, you can press the frothing button again to halt operation.

3. Once completed, the appliance stops working automatically.

Heating only function

1. Ensure to mount the mixing paddle onto the shaft.

2. Ensure the milk level is below the “MAX” mark (300ml).

3. After plugging in the base, press the heating button once. The heating indicator light turns On and the appliance starts to work.
   Note: If desired, you can press the heating button again to halt operation.

4. Once completed, the appliance stops working automatically.

Cleaning, Care & Maintenance

Always disconnect the appliance from the power supply and let it cool down before cleaning and any maintenance.

• Use soapy water and a damp cloth to clean the exterior of the appliance.
• The jar and cover are NOT dishwasher proof! Use some mild detergent and a damp cloth to clean.
• Soak the 2 paddles in warm water, then clean with a soft cloth or brush.
• Dry thoroughly after cleaning.

Troubleshooting

plugged in correctly and switched on
Plug or lead is damaged| Call Rowlett agent or qualified technician
Fuse in the plug has blown| Replace the plug fuse
Power supply| Check power supply

Technical Specifications

Model| Voltage| Power| Current| Weight| Dimensions H x W x D mm
---|---|---|---|---|---
DE401| 220-240V~, 50-60Hz| 450-550W| 3A| 0.85kg| 195 x 160 x 110

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead. The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:

• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.
Rowlett parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.
Rowlett products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Rowlett.
Every effort is made to ensure all details are correct at the time of going to press, however, Rowlett reserves the right to change specifications without notice.

DECLARATION OF CONFORMITY

Application of Territory Legislation & Council Directives(s)

| Low Voltage Directive (LVD) – 2014/35/EU Electrical Equipment (Safety) Regulations 2016 EN 60335-1:2012 +A11:2014
EN 60335-2-15:2016
EN 62233:2008Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU – recast of 2004/108/EC Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
EN55014-1:2017 EN55014-2:2015
EN IEC 61000-3-2: 2019
EN 61000-3-3: 2013 +A1:2019

Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to Directive 2011/65/EU
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 (S.I. 2012/3032)

Producer Name| Rowlett

I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s) and Standard(s).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>