PYLE 5.25″ Wireless BT Speakers PLUTV55BTR User Manual
- June 6, 2024
- Pyle
Table of Contents
PYLE 5.25″ Wireless BT Speakers PLUTV55BTR
PLUTV55BTR Installation
- To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable before installation. Use this unit with a 12-Volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
- Speaker Mounting suggestion as below:
Step 1: Put the PLUTV55BTR speaker in a safe place.
Step 2: Slide in the buckle with rubber pad attached to the bracket stand
of the speaker. Attach the set to the handle bar of vehicle/ship.
Step 3/4: Attach screw to lock the buckle.
Step 5: Using accessories of Butt Connector to Connect Speaker wires
(See Illustration 1)
Step 6: Using accessories of Butt Connector to Connect Power Cable (See
Illustrations 2)
Step 7: Connected two speakers by RGB connect wire, see the drawing in
below (See Illustration 3)
Remote Control Functions
- 10 static colors for choice with 8 kind of brightness which can adjust up and down.
- 3 colors flash, 4 colors strobe, 7 colors fade, 7 colors smooth, all modes can adjust the brightness and speed.
- In static color mode, the brightness can adjust up and down.
- 6 kinds of EQ mode.
Features
- Pro Audio Powersport Speakers with RGB Lights
- Amplified (Active) Speaker System · Wireless BT Music Streaming Ability
- Bridged Sound System: (2) x 5.25” Woofers + (2) x 1” Tweeters
- Marine Grade Waterproof Rated Construction
- Weatherproof & Water-Resistant Housing
- 2-Way Full Range Stereo Sound Reproduction
- Built-in Digital Sound Processing Amplifier
- Integrated Speaker Power & Wiring Harness
- Compact Size & High-Powered Output
- Impressive Bass Response
- Aux (3.5mm) Input Jack
- Connect & Stream Audio from External Devices
- Sleek Design, Machine Molded Speaker Cabinet Housing
- Rugged, Universal Mount Bracket Design for Roll-Bar/Roll-Cage
- Used for Off-Road Outdoor Vehicles: ATV, UTV, 4×4, Jeeps, Marine
Watercraft Wireless BT Connectivity
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Devices
- Smartphones, Tablets, Laptops, etc.
- Wireless BT Version: V5.0
- Wireless BT Network Name: `PyleUSA’
- Wireless Range: 30+ ft.
- *Wireless BT Receiver Module Built-Into Amplifier of Main/Active Speaker
What’s in the Box
- (1) 5.25” Amplified Main Speaker
- (1) 5.25” Passive Support Speaker
- Speaker Connection Wires, 6.6′ ft.
- (2) Butt Connectors, 16-22 AWG
- (2) 1.75″ Aluminum Mounting Brackets
- (2) 2″ Aluminum Mounting Brackets
- (2) 6.5″ x 0.95″ x 0.67″Inches Rubber Pads
- (2) 5.7″ x 0.95″ x 0.67″Inches Rubber Pads
- (2) 6x50mm Hexagon Socket Head Cap Screws
- (2) Stainless Steel Nuts
- RGB Connection Wire, 6.6′ ft.
- Remote Control
Technical Specs
- Speaker Power: 1000 Watt MAX
- Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
- Amp Type: 2-Channel, Class D
- Marine Grade Waterproof Rating: IP-X5
- Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
- Tweeter Type: Neodymium Dome (x2)
- Frequency Response: 80Hz-20kHz
- Impedance: 4 Ohm
- Magnet Type: 24 oz. Circuit
- Mid-Woofer Voice Coil Type: 1”, Aluminum
- Sensitivity: 88 dB +/- 2 dB @ 1M/1W
- Anti-Thump Turn-On
- Soft Turn On/Off
- T.H.D: <0.05% · S/N Ratio: >80dB
- Channel Separation: >65dB
- Amp Freq. Response: 20Hz-20 kHz
- Fuse: 1 x 15A
- Power Supply: DC 12V
- Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.75” ~ 2.0” inches
- Speaker Dimensions: 6.5” x 7.1” x 9.5” -inches, with Bracket (-Each)
**| This products can expose you to a chemical or group of chemicals, which
may include “Di (2-ethylhexyl) phthalate (DEHP)”** which is known in the
state of California to cause cancer, birth defects, or other reproductive
harm.
For more info, go to https://www.p65warnings.ca.gov/.
---|---
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>