Listener Pro LP-WS100S Bluetooth Professional Soundbar User Manual

Listener Pro LP-WS100S Bluetooth Professional Soundbar

Packing List

Parameter

Function Description

Ports

1. Sub output: We reserve this upgraded interface, the users can connect it to your subwoofer and create a bass system.
2. ARC: Using the HDMI cable, connect the HDMI(ARC) connector on the soundbar to the HDMI ARC connector on the TV.
3. USB: Automatically identifies and plays tracks from a storage device.
4. AUX: Connect to the RCA jack of the source device using a 3.5 to RCA cable.
5. OPT: Connect to the OPT-OUT jack of the source device using a optical cable.
6. COX: Connect to the COX OUT jack of the source device using a coaxial cable.
7. Power: Connect to 100~240V power supply.

Display Screen

1. Sound effect: You can select from 3 sound modes, the icon will light up once enter the corresponding mode.
   MUS: music mode
   NEWS: news mode
   MOV: movie mode

2. Volume: The volume level can be set between 1 and 30, 18~20 is advisable.
   Shows audio input temporarily: Select the audio source through touch screen or remote control, the screen will show audio input for 3s, and then back to volume.

3. Audio input: Select the audio source to input through touch screen or remote control, the corresponding icon will light up once this audio source enter successfully.
   ARC: ARC input (your device must support HDMI ARC output)
   BT: Bluetooth input
   AUX: Stereo aux input
   OPT: Digital optical input
   COX: Coaxial input
   USB: USB input, the playback time will display on volume area

Operation (Touch Screen)

1. ON/OFF: Touch the icon for 3s to turn on/off.
2. Input selection: Touch the button and the “BT/AUX/OPT/COX/ARC/USB” icons will light up if the corresponding audio source is connected.

Remote Control

1. BT/Pair
   Short press this button to select BT mode, long press to remove the previously paired device and enter pairing mode.

2. Audio Source Selection
   Press the button, the icon (BT, AUX, OPT, ARC, USB) will light up if the corresponding audio source is connected.

3. Sound Effect
   MUS: music mode
   NEWS: news mode
   MOV: movie mode

Wall Mount

Installation Steps

Important:
User research shows, most users prefer to place speakers on cabinet in order to keep the wall clean. The height of this speaker is only 60mm, which is very suitable for placing in front of the TV, so there is no
mount kit in the package. Please contact us if you need mount kits.

Wired Connection

Plug into the power supply, the display screen will show “-” which means the soundbar is in standby mode (do not turn on until the audio connection is completed).
There are five ways to connect the soundbar and the audio source: AUX, OPT, COX, USB, HDMI(ARC). Select one according to the device you are trying to connect, the corresponding icon will light up once this audio source enter successfully.
Notes:

1. The default audio output mode of most TVs is a self-contained speaker, so after connect this soundbar with your TV by OPT, COX, ARC, please set the TV audio output mode manually according to the audio cable connect with the soundbar.
2. If you choose HDMI(ARC) connection, please make sure your TV or devices support the HDMI ARC feature.
   TV’s HDMI ARC is disabled by default, so please set TV for ARC mode. HDMI ARC port and mode on TV may be differently, please check the TV user manual for details.
   If your TV doesn’t support HDMI ARC, you can use the included optical audio cable to connect to the optical port on your TV.

Wireless Connection

1. Turn on the device, touch the icon on the control panle or press the button on the remote control, the “BT” icon will flash slowly on the screen indicating the soundbar has entered paring mode.
2. Search for “Listener Pro 100S” on your bluetooth device and then pair to the soundbar. The BT icon will illuminate, and the soundbar will make an audible beep to indicate the connection is complete.

Notes:

1. If your device asks for a password during the pairing process, please use “0000”
2. If you can’t find or pair to this bluetooth, turn off the soundbar, then 5s later turn it on and try to connect by following the instructions above.
3. The soundbar can only pair to one device at a time, if you can’t pair your device , please check that no other device is already paired with the soundbar. A previously paired device will automatically reconnect.
4. Bluetooth connection range is 5-8m, but it will be shorter by some causes- radio interference such as WIFI routers, induction cookers and smart air cleaners; too much bluetooth your device paired and reserved .

Automatic Standby

To save power and extend the working time of the speaker, it will automatically switch to Standby mode if there is no input signal for over 15 minutes., and will turn back on when an input signal is detected.

After-sales Services and Warranty

1. 30-Day Return of Any Reason. You may return your undamaged product and packaging within 30 days, please return the unit in its original carton.
   12-Month Warranty for Quality-Related Issues. If it is not quality-related, the customer must pay the return shipping costs and repair costs.

2. When after-sales service is needed, please fill in the relevant information according to this form.

3. If you have any questions or comments, please contact us at service@listenerpro.com or visit our website: www.listenerpro.com.

The Toxic and Hazardous Substances or Elements

This form was prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in accordance with the GB/T 26572.
X: Indicates that the content of the hazardous substance in all homogeneous materials of the part is exceeding the limit requirement specified in accordance with the GB/I 26572. There is no mature alternative solution that meets the requirements of RoHS.

The numbers in this mark indicate that the environmental protection use period of the product under normal use is 10 years. Some components may also have an environmental protection use period indication, and the environmental protection use period is subject to the figures in the indication. Due to different product models, the product may not include all the above parts except the host, please refer to the product packaging.
Only suitable for areas below an altitude of 2000 m.
Only for use in non-tropical climates.

Listener Pro Technology Co.,Ltd.
Web: www.listenerpro.com
Email: service@listenerpro.com

Contact us to get:
1. After Sales Service
2. Wall Mount Bracket Kit
3. Promotion Code for next Purchase

References

• Wireless Bluetooth Speaker, Wired Earphone - Listener Pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>