METER HYDROS 21 Water Depth + Temperature + Electrical Conductivity User Guide
- June 6, 2024
- METER
Table of Contents
HYDROS 21
Water Depth + Temperature + Electrical Conductivity
HYDROS 21 QUICKSTART
Preparation
Confirm that HYDROS 21 components are intact. Gather the necessary tools and
suspension setup for the desired installation type and a mounting post for the
data logger.
Determine the installation depth prior to installation. The sensor zero point
is 1.5 cm from the bottom of the sensor, and the desired depth should be set
from the zero point.
Sensor protection is recommended to protect the pressure sensor from water
flow noise and debris and to dampen the stream current effect on the pressure
measurement.
Read the full HYDROS 21 User Manual at meter
group.com/hydros21-support. All products
have a 30-day satisfaction guarantee.
ATTENTION
For best results, use the latest versions of METER software and firmware for
the computer or mobile device, products, and sensors.
Installation
-
Install Sensor (Option 1) Groundwater Well Installation.
Use a Kellem grip to set the desired installation depth. Lower the sensor into the well and suspend the sensor in position. Cap the well, ensuring the well can vent to atmospheric pressure. Secure and protect cables with PVC casing or flexible conduit. -
-
Install Sensor (Option 2)
Water Body Installation. Suspend the sensor and sensor protection in the water body from a secure location bridge, pier, or post). Secure and protect cables with PVC casing or flexible conduit to protect sensor cable from higher currents and floating debris.
2. Check Sensor Operation Plug the sensor into the data logger and use the SCAN function in the software to check sensor operation.
3. Configure Logger
Use data logger software to apply appropriate settings to the sensors plugged into each data logger port.
SUPPORT
Have a question or problem? Our support team can help. We manufacture, test, calibrate, and repair every instrument in the house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it.
NORTH AMERICA
Email:
support.environment@metergroup.com
Phone: +1.509.332.5600| EUROPE
Email: support.europe@metergroup.com
Phone: +49 89 12 66 52 0
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>