Aputure Accent B7c 8-Light Kit Instruction Manual

Accent B7c 8-Light Kit
Product Manual

Thank You!
Thank you for purchasing the Aputure Accent B7c 8-Light Kit.

Instructions

• Please read this product manual carefully.

• Keep this product manual and always include it when passing the product onto third parties.
  WARNING: Do not place the product near any corrosive chemicals. Corrosion may cause the product to malfunction.

• Only use a microfiber or dry cloth to clean the product.

• Be careful to not damage the light by dropping it or otherwise introducing physical shock.

• Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.

• Please have the product checked by the authorized service or agent if your product has some problems. Please note that this warranty does not apply to repair arising out of the malfunction of unauthorized disassembly, although you may request such repairs on a chargeable basis.

• Use of original Aputure cable accessories is recommended. Please note that this warranty does not apply to repairs arising out of the malfunction of non-original Aputure accessories, although you may request such repairs on a chargeable basis.

• The product is certificated by ROHS, CE, KCC and Japan MC, etc. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repair arising from malfunction, although you may request such repairs on a chargeable basis.

• The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design and specifications change.

Intended Use

Intended use of the Accent B7c 8-Light Kit includes:

• The user has read the instructions of this manual.
• The user is using the products within the operating conditions and limitations described in this product manual.
  Improper use” means using products other than as described in these instructions or under operating conditions that differ from those described herein.

Components List

Product Details

1. Power Button
2. Diffusion Cover
3. “-“Brightness Button
4. “+” Brightness Button
5. AC IN
6. Lamp Socket
7. Fuse Holder
8. Power Switch

Operation Instructions

1. Powering the Accent B7c 8-Light Charging Case
   1). AC Power Supply
   2). Attaching/detaching the fuseIf the fuse burns out, replace it with a new 3A fuse. To open the Fuse Holder, rotate it counter- clockwise to unscrew it, and remove the burnt-out fuse. Proceed to install a new fuse by inserting it into the Fuse Holder, returning the Fuse Holder to its designated position, and rotating it clockwise to screw it into place.

2. Charging
   To charge the B7c bulbs using the charging case, plug the AC power cable into the case and a power outlet. Then ensure that the power switch is in the “ON” position. B7c bulbs can then be charged by inserting them into each of the “push-pull lamp sockets”If the LEDs are active and output light, the B7’s internal battery charges slowly. When the B7c is in standby mode or is powered off, the bulb charges more quickly and can complete a full charge cycle (0-100%) in approximately 2 hours.
   If the bulb’s internal temperature exceeds 45C, a protection mechanism activates, and all charging processes cease until the light’s internal temperature cools to below 45C.
   Battery Charging Speeds
   In the fastest charging scenarios, the B7c can charge up to:
   -50% in 45 minutes
   – 80% in 74 minutes
   – 100% in 120 minutes
   Checking the Charging Status
   When the bulb is in standby mode or is powered off, press the “+” or “-“buttons to initiate a status check. If the battery is charging, the bulb will pulse three times at 3200K. if the battery is fully charged, the bulb will light up for 3 seconds at 3200K

3. B7c Quick Start Color Code Guide
   As the B7c has no screen, we’ve programed some color sequences to signify different actions. Here is a quick reference guide.

Function/Mode

| Trigger|

Light Pattern

---|---|---
Bluetooth Reset| Simultaneously long-press the power button and the “+” or ” button for 5 seconds.| The light will flash red, Green then Blue.
Charging in Progress| When the bulb is in standby mode or is powered off, press the “+” or ” buttons.| The light will output 3200K at 10% brightness, pulsing three times.
Fully Charged| When the bulb is in standby mode or is powered oft press the “+” or ” buttons.| The light will output 3200K at 10% brightness for three seconds.
Switch to Standard (AC) Mode| Simultaneously press the power button, the ‘+’ button, and the ” button.| The light will emit green at 30% output, then gradually dim to 0%.
Switch to Battery (DC) Mode| Simultaneously press the power button, the “+” button, and the ” button.| The light gradually fades Into a green glow from 0% to 30% brightness.
Checking AC Mode| When not connected to AC power, to confirm that the light is in AC mode, long-press the power button for 3 seconds.| The light will pulse green at 10% brightness 3 times.
Checking the Battery Charge Level| You can check the B7c charge level in any mode. To perform a check, simultaneously press the “‘ and’-– buttons.| The bulb will pulse with blue light, with the number of pulses corresponding to its charge level.
1 Pulse = 0-20%
2 Pulses = 20-40%
3 Pulses = 40-60%
4 Pulses = 60-80%
5 Pulses = 80-100%
4. B7c¢ Power On/Off
Press the power button in the center of the light to toggle the fixture on or off.
When in “Standby Mode,” short-press the power button once to toggle the fixture on and off.
To fully shut down the fixture or to turn it off from a shutdown state, long- press the power button for 3 seconds.
When the bulb powers on from standby or off state, it will resume its previous settings.

5. B7c CCT Mode
   You can toggle through the six built-in CCT presets by double -press­ ing power button: 2000K, 2700K, 3200K, 4300K, 5500K, 6500K. You can also adjust the B7¢’s CCT more precisely between 2,000K-10,000K using the Sidus Link App.

6. B7c Brightness
   You can toggle through ten steps of brightness adjustment using the onboard controls, or choose a precise output level using the Sidus Link App. Press the”+” button to increase the brightness or press the”” button to decrease the brightness. This will cycle between 10 dimming presets between 10% to 100%. You can also adjust the brightness more precisely using the Sidus Link App.

7. B7c Bluetooth Mode
   Simultaneously long-press the power button and the +” or”-” button for 5 seconds to reset the fixture’s Bluetooth configuration. When the Bluetooth Reset sequence initiates, the bulb will proceed to pulse red, green, then blue in sequence. Then you can connect to the B7c using the Sidus Link App.

8. B7c Power Supply Modes
   This fixture can operate in two different power supply modes Standard (AC) Mode and Battery (DC) Mode.
   Standard/AC Mode In Standard (AC) Mode, the bulb behaves as a regular light bulb and turns on when it receives power from a lamp socket (E26/E27). When the lamp the bulb is installed in is switched off, the bulb will also immediately turn off.
   Battery/DC Mode
   In Battery (DC) Mode, the bulb switches to its internal battery power when it does not receive any AC power from a lamp. Switching between these states causes the light to turn off for a brief moment, before resuming its previous settings.
   Switching Between Modes
   To switch between the two modes, simultaneously press the power button, the • +” button, and the • – • button. To signify that it is in Standard (AC) Mode, the bulb emits a green glow at 30% brightness, and then slowly fades to 0%. To signify that it is in Battery (DC) Mode, it gradually fades into a green glow from 0% to 30% brightness.
   Checking the Power Supply Mode
   To determine which mode the bulb is currently in, long-press the power button for 3 seconds. If the light pulses green three times, the bulb is in Standard (AC) Mode. If the light turns on at 10% brightness, then the fixture is in Battery (DC) Mode.

9. B7c Preventing Overheating
   The ambient operating temperature of the Accent B7c is 10 40C. This product utilizes a built-in lithium battery. To enhance the battery’s stability and longevity, we use high-temperature-resistant batteries, which can be used in an environment of-10 ~ 40°C.
   Keeping the ambient temperature well below 40C is recommended to ensure that the B7c does not experience any overheating issues. Facing the bulb upright also provides the best airflow; however, the B7c is operable in any position.
   If the light enters a “Battery Protection Mode,” it will be able to resume operation once the internal temperature of the components cools down.
   Standard/AC Mode
   In Standard (AC) Mode, if the bulb’s internal temperature exceeds 80°C, it enters a “Battery Protection Mode,” wherein the battery and LEDs are powered off to protect and cool the internal components.
   Battery/DC Mode
   In Battery (DC) Mode, if the bulb’s internal temperature exceeds 70C, the maximum output power of the light is reduced to 80%. Should the internal temperature continue to rise and exceed 73C, the light enters a “Battery Protection Mode,” wherein the battery and LEDs are powered off to protect and cool the internal components.

10. Sid us Link App Control

1. Sidus Link App Control allows you to more precisely adjust all of the output settings of the Accent B7c, including fine-tuning CCT and brightness, in addition to accessing the light’s HSI color-tunability, and nine built-in lighting effects, including Paparazzi, Fireworks, Faulty Bulb, lightning, TV, Party, Pulsing, Cop Car, and Fire.
2. Using the Sidus Link APP
   You can download the Sid we link app from the iOS App Store or Google Play Store to enhance the light’s functionality. Please visit sidus.link/app/help for more details regarding how to use the app to control your Aputure Lights.

Get Sidus Link” Apphttps://m.sidus.link/download

|

https://sidus.link/app/help

---|---

Specifications

Accent B7c

Power Output Maximum
(LED light Source)| 7W
Operation Temperature| -10-40°C
Lithium-polymer Battery| 1300mAh 7.4V
Charging Time| 2h (When in standby mode or powered off)
Battery Life| Max Brightness: 70+minutes: Min. Brightness: 20+hrs
Cooling Mode| Passive Cooling
Dimension| φ70mm∗118mmAp2.75∗4.64in
Weight| 240g/0.5291b

Accent B7c 8-Light Charging Case

Photometrics

*This data reflects the average illuminance of the light at these distances. The actual values may shift slightly between different lights.
**These luminance values are measured at the brightest point of the bulb, directly above the fixture.

Light Distribution Curve

GUARANTEE CARD

Serial No.|
---|---
Item Name|
Purchase Date|
Buyer Name|
Buyer Phone|
Buyer Add|
Franchiser Seal|

Aputure Imaging Industries Co., Ltd.
Inspection: Qualified
Add: F/3, Building 21, Longjun Industrial Estate, Heping West Road, Shenzhen, Guangdong

Service Warranty

Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser from defects in material and workmanship for a period of one (1) year after the date of purchase. For more details of warranty visit www.aputure.com
Important:
Keep your original sales receipt. Be sure the dealer has written on it the date, serial No. of the product. This information is required for warranty service.
This warranty does not cover

• Damage that is the result of misuse, abuse, accident (including but not limited to damage by water), faulty connection, defective or maladjusted associated equipment, or the use of the product with equipment for which it was not intended.
• Cosmetic defects that appear more than thirty (30) days after the date of purchase. Cosmetic damage caused by improper handling is also excluded.
• Damage occurs while the product is being shipped to whoever will service it. This warranty Is void If:
• The product identification or serial No. label is removed or defaced in any way.
• The product is serviced or repaired by anyone other than Aputure or an authorized Aputure dealer or service agency.

This warranty is void If:

• The product identification or serial No. label is removed or defaced in any way.
• The product is serviced or repaired by anyone other than Aputure or an authorized Aputure dealer or service agency.

Aputure Imaging Industries Co., Ltd.
Add: F/3, Building 21, Longjun industrial estate, HePing West Road, Shenzhen, Guangdong
E-MAIL: cs@aputure.com
Sales Contact: (86)0755-83285569-613

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>