niceboy CHARLES i3 Robotic Vacuum User Manual

CHARLES i3
User Manual / Robotic Vacuum

SAFETY INSTRUCTIONS

Please follow the following safety precautions before using the product:

• Please read this manual carefully before using the product and use the product according to the instructions in this manual.
• Keep it properly.
• If you need to transfer the product to a third party, please attach the manual together with the product.
• Any operation inconsistent with this manual may lead to the damage of the product and personal injury.

*Caution

1. This product can only be dismantled by an authorized technician. Such behavior without permission is not suggested.
2. Only the power adapter provided by the factory can be used with this product. The use of an adapter of other specifications may cause damage to the product.
3. Don’t touch the cord, charging base, and power adapter with a wet hand.
4. Keep the opening and running parts free of curtain, hair, clothes, or finger.
5. Don’t put the cleaner around burning objects, including cigarettes, lighter, or anything that is likely to cause a fire.
6. Don’t use the cleaner to pick up combustible material, including gasoline or toner from the printer, copier, and mixer. Don’t use it with inflammable around.
7. Please clean the product after charging, and turn off the product switch before cleaning.
8. Do not over-bend wires or place heavy or sharp objects on the machine.
9. This product is an indoor household appliance, please Don’t use it outdoors.
10. The cleaner can’t be used by children of 8 years and below or persons with a mental disorder unless they have been given supervision or instruction concerning the use of this appliance. Don’t let your children ride on or play with the cleaner.
11. Do not use this product on wet or watery ground.
12. Possible problems in product cleaning shall be eliminated as soon as possible. Please clear up any power cord or small object on the floor before using the cleaner in case they hinder the cleaning. Fold over the fringed them of carpet and prevent curtain or tablecloth from touching the floor.
13. If the room to be cleaned contains a staircase or any suspended structure, please test first whether the robot will detect it and not fall off the edge. If a physical barrier is needed for protection, make sure the facility does not cause such injury as tripping
14. When the product is not used for a long time, the machine shall be charged every three months to avoid battery failure due to low power for a long time.
15. Don’t use it without a dust collector and filters in place.
16. Make sure the power adapter is connected to the socket or charging base when charging.
17. Avoid any cold or heat. Operate the robot between -10°C to 50°C.
18. Before discarding the product, disconnect the cleaner from the charging base, turn off power and remove the battery.
19. Make sure the product is not powered on when removing the battery.
20. Please remove and discard the battery in accordance with local laws and regulations before discarding the product.
21. Do not use the product with a damaged power cord or power socket. Do not use the product when the product cannot work normally due to falling, damage, outdoor use, or water ingress.

PRECAUTIONS

Please read the following guidelines before using the Cleaner.

The power cord and other sundries scattered on the ground may entangle or wrap the product. Be sure to remove them before use.

Please roll up the fringe of the carpet or make the product work on the short- wool carpet.

Please remove the white strips on both sides of the bumper before use, otherwise, the machine will not work normally.

Guardrails shall be placed at the edge of the double layer to ensure the safe operation of the product.

PRODUCT INTRODUCTION

Cleaner Part Diagram

1. Cover
2. Infrared bumper
3. ON/OFF key
4. Fixed point cleaning
5. Middle cover
6. Side brush
7. Cliff sensor
8. Left driving caster
9. Universal caster
10. Side brush| 11. Battery cover
12. Suction port
13. Right driving caster
14. Middle cover
15. Dust collector
16. Dust collector handle
17. Infrared signal receiver
18. Power connector
19. Switch
20. Air outlet
---|---

Dust collector and remote controller diagram

1. First level filter
2. Dust collector
3. Fine filter cotton
4. HEPA filter
5. Filter element seal ring
6. ON/OFF
7. Forward
8. Turn left| 9. Backward
10. Fixed-point cleaning
11. Automatic recharge
(Only for models with this function)
12. Turn right
13. Pause
14. Auto cleaning
15. Edge cleaning
---|---

Specifications

OPERATION INSTRUCTIONS

Charging method

Directly plug the power adapter into the machine, as shown in the figure.
* Notes
A.Please charge the machine for not less than 12 hours when charging for the first time, and charge it until the red light of the power key breathe. When the battery is fully filled, the green light will be constantly on.
B.When not in use for a long time, please full charge the machine, turn off the power switch, and store it in a cool and dry place.

Turn on machine
Turn on the power switch, the panel button indicator flashes (1 means power ON, 0 means power OFF)
Remote controller
Standby
Press this key to enter the sleep mode; press the Pause key for restarting the machine; If the machine is not operated within 3 minutes, the machine will automatically enter the sleep mode.

Auto-cleaning
Press this key to start cleaning automatically; Press the Pause key to pause the machine if necessary.
Automatic recharge (Only for models with this feature)
Press this key to automatically find the charging base for charging.
Pause
Press this key to pause the machine in the running state, and press this key to wake up the machine in the sleeping state.
Direction
A Forward
Press this key to move the machine forward.
B Backward
Press this key to move the machine back.
C Left
Press this key to move the machine left.
D Right
Press this key to move the machine right
Sweep along wall mode
Press this key to edge cleaning mode. You can only switch to another mode (like auto) by remote control or it will keep working on this mode till power off.
Fixed-point cleaning
Press this key to start the machine’s spiral point cleaning. After the end of fixed-point cleaning mode, it will enter auto mode automatically.

MAINTENANCE

Dust collector and filter screen cleaning
Take out the dust collector.

Open the dust collector lock and pour the dust and garbage.

Remove the filter elements. HEPA can be washed with water, and you can tap it to remove dust before washing.

Wash the dust collector and the first filter element, dry the dust collector and filter elements, and keep them dry to ensure their service life

Clean the side brush and universal caster
Clean the side brush
Remove the side brush and wipe it with a clean cloth.
Clean universal caster
Clean the universal caster to remove hair entanglement.

Clean the cliff sensor
Clean the cliff sensor to ensure sensor sensitivity.

Clean the suction port
If there is a large amount of dust in the suction port, clean it with a cloth. Clean the sensor window
Clean the sensor window

INDICATOR DESCRIPTION

When something goes wrong with the machine, the red light will be flash or lights on constantly, and the voice prompts at the same time.

1 beep, red light constantly on| Abnormal wheel| Please clean the foreign matter around the wheel if any beep,
---|---|---
red light flashes| IR bumper stuck| Clean the foreign matter around the bumper if any
2 beeps, red light flashes| Abnormal side brush| Please clean the hair around the side brush if any
3 beeps, red light flashes| Abnormal cliff sensor| Please clean the sensor window if any dirty objects
4 beeps, red light flashes| Low battery power| Charge the machine

*Warm tips
If the above method does not solve the problem, please try the following:

1. Restart the power of the machine.
2. If the problem cannot be solved by restarting the machine, please send the machine to the after-sales service center for maintenance.

PACKING LIST

USER INFORMATION FOR DISPOSING OF ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)

This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed of together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing of electrical and electronic devices.
(Business and corporate use)
In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.

References

• Niceboy - IT'S YOUR DAY!
• Niceboy - IT'S YOUR DAY!
• Niceboy - IT'S YOUR DAY!
• Niceboy - IT'S YOUR DAY!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>