SKEETER HAWK SKE-TUB-0001 Mosquito Bait Station User Manual

: June 6, 2024
: SKEETER HAWK

Table of Contents

BACKYARD
MOSQUITO
- FIERCE PROTECTION
- BACKYARD
MOSQUITO BAIT STATION

BACKYARD

MOSQUITO

BAIT STATION

SKE-TUB-0001

Hello, and thank you for purchasing the Patio Mosquito Trap.

Skeeter Hawk is a full line of mosquito defense products with powerful mosquito control technology.

FIERCE PROTECTION

QUALITY GUARANTEE
This product is guaranteed against all defects in workmanship and materials for the original owner for one year from the date of purchase. Damage to or failure of the product or any component thereof due to alteration, misuse, battery leakage or lack of maintenance will void any and all guarantees.

DATE OF PURCHASE: ____ PRODUCT SKU: SKE-TUB-0001

Contact 800.255.6061 for product questions, assistance or warranty claims.

Register your warranty at:
www.SKEETER-HAWK.com

BACKYARD

MOSQUITO BAIT STATION

The BACKYARD MOSQUITO BAIT STATION utilizes pulsing UV LED technology for optimum attraction. Also equipped with a dusk-to-dawn sensor, the Bait Station will remain off during the day, thus preserving battery life. Once on, the UV light pulsates every 4 seconds to attract pesky mosquitoes and other flying insects inside where they consume the bait.

FEATURES:

Collapsible carry handle with hanging hook
Sleek, signature ultraviolet enclosure enhances UV light output
Attracts and controls mosquitoes and other flying insects

SKE-TUB-0001 - FEATURES 1

SKE-TUB-0001 - FEATURES 2ab

BATTERY INSTALLATION

1. Unscrew the top of the UV light module to access the battery compartment.

2. Remove old batteries and dispose of properly. Insert 3 new AAA batteries as shown.

3. Reattach the top portion of the UV light module.

BAIT STATION SET UP

1. Detach the bait station tube from the UV light module by turning counter- clockwise.

2. Remove plastic seal and fill to the Max Fill Line with water. Attach the Refill Cap.

3. Shake the tube until mixture is fully dissolved, then reattach tube to the UV light module.

When the tube is empty (water and repellent mixture have reached the refill line), remove the tube from the UV light module and discard of properly. Save the UV light module and continue to use with our Replacement Bait Station Tube, SKE-ACC-0002.

As the Bait Station is used, some evaporation will occur. Refill with water to the max fill line, as needed. If crusting on top of the water occurs, the effectiveness has not dimenished. This is a normal reaction to the yeast in the all-natural insecticide mix. If desired, you can place the included plastic cap back on the tube and shake the mixture.

SKE-TUB-0001 - OPERATION

OPERATION

Press the power button to turn the UV LEDs ON.
UV light pulsates every 4 seconds when ON. The Backyard Mosquito Bait Station features a dusk-to-dawn sensor to keep the light from activating and wasting battery life during the day. The light will turn on again automatically once it is dark enough.
Press the power button again to turn OFF.

PLACEMENT

For an average sized backyard, place two Backyard Bait Stations in the yard stationed equidistant from each other.

Our extensive line of pest defense products helps provide fierce protection indoors, outdoors, and even on-the-go. Visit our website for full information.