GLOBBER Foldable Electric Scooter Instruction Manual

www.globber.com

ID DEVELOPMENT LIMITED
Room 1302. 13/E Chevalier House.
45 – 51 Chatham Road South,
Tsim Sha Tsui. Kowloon, Hong Kong GLOBBER FRANCE SAS
66. Avenue de l’industrie
01120 Montluel – France
Ref.:658-120/X7
Fabrique en Chine/ Made in China

ONEK

FOLDABLE ELECTRIC SCOOTER /
TROTTINETTE ELECTRIQUE PLIABLE

Class A / Classe A
100KG MAX NF EN 14619:2019

Additional Info
For questions and inquiries please contact us at: contact@globber.com

**WARRANTY

**

The manufacturer warranties this product to be free of manufacturing defects for a period of 2 years from the date of the purchase This Limited Warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure, or loss caused by improper assembly, maintenance, or storage. This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product. Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which it was purchased. For your records, save your original sales receipt with this manual and write the product name below.

Spare parts

To order spare parts for this product, please visit our website www.globber.com   FROMTHEAGOF 14

MAXIMUM USER WEIGHT

| 25KRIHMAXItAUMSPEED
---|---
| OFRONT&REARLIGHTING SIOPLIGHTRINCTION
| -15-201WAVEFAGEBATTERY hill.DGEPERCMRCE

depth instructions for the future.
FEN 14619:2019-CLASS: 100 kg MAX
‘EADTHE INSTRUCTIONS PROVIDED BY THE MANUFACTURER BEFORE USING.
– SAFE USE OF THE ELECTRIC SCOOTER
stated by EN60335-1, this appliance can be used by children aged from 8 years and above and persons with reduced physical-31, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction con-ring use of the appliance in a safe way and, understand the hazards involved. Children shall not play with the appliance. leaning and user maintenance shall not be made by children without supervision. yarning. Never use the product close to a water source. Stop using the product when damaged

TECHNICAL SPECIFICATION

charging voltage: 42V)
Charger| AC input 100-240v 50/60HZ, 2.5 A DC output 42V,2 A
Charging time| +/-3 Hours
Sealing around compartment| IPX4

*depending on the users’ weight.

-The materials used for the construction of the machine, are not toxic and have been analyzed according to the follovving directive: 2011/65 /EU Rohs. A safety data sheet has also been established for the battery. -The safety and reliability of the control systems have been evaluated according to the following guidelines: 2014/30/ EU Electromagnetic Compatibility Directive and 2014/35 /EU LowVoltage Directive.

CONTROL FUNCTIONS

Screen functions

On/Off functioning  press the power buttonOtotum on/off the power.
Acceleration
Press the right acceleration button to start and accelerate. Kick start to activate the motor.
Braking
Press the brake lever on another left side of thehandlebar to engage the rear wheel disc brake. The action of the brake lever will simultaneously engage the electromagnetic motor brake of the front wheel. To help to brake you can also operate the rear fender using the foot.
Setting the speeds
Short press the function key to directly adjust the speed.
Beginner mode : the symbol “D” is not visible on the screen (Max. speed:10 km/h)
Normal mode: the”D” symbol is displayed in white on the screen (Max. speed:15 km/h)
Sports mode : the”D” symbol is displayed in red on the screen (Max. speed:25 kWh)
Headlights
Press the function button twice shortly to tum the front and rear lights. The taillights have a brake height function and engage with each action of the brake located on the handlebar (even when th e. headlights are not on). To tum off the headlights, press the action button twice again.
Warning. If the electric scooter is overheated (temperature 80° C) the temperature warning light comes on and an audible signal sounds (this can happen during excessive use). You must then stop using the electric scooter and wai-for the alarm to go off and the audible signal. You can either leave the scooter on to wait for the end of the signal or – put the scooter on OFF and then turn it on again after a few minutes.

TIPS FOR USE/CAUTION

Before and after using your appliance: Medal I the connections: the brake, the steering column quick-locking system, and the wheel aes must be correctly adjusted and undamaged. Also, check wheel wear. Check the height of the steering system and make sure that the nuts are tightened and the handlebars and front wheel are perpendiculars. Check that the kickstand is ly folded before starting. When parting chedahat the kickstand is properly unfolded, the unit I must be parked on flat ground to avoid any risk of falling.
the unit is not equipped with a kickstand, ground parking is recommended, making sure you do not interfere with the traffic.
•lfthe scooter battery is low or discharged, the appliance can be used as a standard scooter. To do so, switch off the scooter by pressing the OFf button. Then stand on the scooter with your hands on each ha handlebar and push with one foot to make it move forward. Proceed with caution to start with.
•A median ical foot brake is located at the rear of the scooter. When necessary, press it to slow down. Press grad ua I ly to avoid skidding or loss of stability. The composite brake may be hot after repeated braking. Avoid touching it during and after use.

Wetweatherimpairstractionand braking.
Warning. Any load attached to the handlebars will affect the stability of the vehicle. When you use your electric scooter, ensure your position is always correct and respect the highway code. Do not press the throttle button or the brakes suddenly. Always speed up and slow down gradually. The scooter is for teenagers and adults only. It is not a toy. It is a means of transport and not designed for extreme sports such as jumps, ramps, ollies, etc. Under no circumstances must the product be used in a skatepark for aggressive use (figures, etc)
-Cheddar laws concerning the use of scooters. Respect all the traffic rules and road signs. Keep away from pedestrians or users on the public highway. -In France, this product is equipped to circulate on certain punk roads, for users of at least 12 years old. Consultthe website service.pulicfr/particuliers/vosdroits/F308.
-In France, it is the responsibility of users of a motorized mobility device (EDP) to insure. Motorized EDPs maybe induce in-home multi-risk insurance contracts but with a specific dvil I lability dause of the land motorvehides (VTM) type, or be the subject of a spedficEDP motorized contract.
-Preferably use on flat, dean surfaces free from gravel or grease. Avoid bumps and drain gratings likely to causean acddent Do not use near swimming pools, on or near steps
-Vibration and shock: Using electric scooters can generate significant vibrations and shot depending on the surface on which it is used. Do not use your scooter for too big, and Immediately stop using if discomfort is caused by vibrations. L Shoes must be worn and we strongly advise you to wear trousers and long-sleeved shirts to avoid injury if you fall.
-Caution!Wear personal protection equipment including wrist guards, gloves, knee and elbow protectors, and a helmet
(Keep your helmet chin strap securely budded).
Do not use in the dark without using the traffic lights.
-It is highly recommended to wear reflective nothing and accessories to enhance/increase its visibility.
-The electric scooter is not designed foraaobatia. Do not attempt to jump or execute dangerous maneuvers.
-Do not ride more than one person on the scooter.
-You are advised not to leave the eclectic scooter outside in damp or wet conditions.
– Do not touch the hub motor located in the front wheel when in use or immediately after riding.
-To avoid pinching and entrapment, don’t get your fingers stuck in moving parts.
-When the product is no longer used it should be stored in a safe place or put under protection (lock system) to prevent unauthorized use of orders/products.

2. Unfold the steering column, lock the safety latch, and slide the fixing ring over the safety latch.|

3. Fix the bmkeleverwith hex wrench (MS supplied),

---|---
| 3. Lowerthesteetingcolumn.
---|---

BATTERY DISASSEMBLE AND ASSEMBLE INSTRUCTIONS

Disassemble

1. Pressthedashboard cover lock to open it, then pull it up.| 2. Unscrew the battery cover.| 3. Pull the battery tonight up to Tip: lightly press the cover to remove the battery. and tum. Then tighten the battery cover.
---|---|---

Assemble

1. Open the dashboard cover and battery cover. Tip: Lightly press the cover and tum.|
2. Align the groove of the battery with the groove of the column and gently place the battery inside (please pay attention to the direction of the groove)
---|---

3. Tighten the battery cover and push the dashboard cover lockdown. Wa ming. To properly tighten, the cover makes sure that the trap of the battery does not block the mechanism.

Naming. Before repositioning the battery in its housing, be sure to replace the protective cap of the charging port mated under the battery to avoid faulty contact (seethe loading scheme of Option 2).

3 – CHARGING
tourelectricscooter is delivered with a specific charger.
is also equipped with two loading ports:
-1 loading port located at the base of the steering column.
-1 charging port located at the base of the battery (removable battery).
Both of these charging options meet a practical need and allow battery charging in all circumstances.

-Children shall not play with the appliance.
-Cleaning and user maintenance should not be made by children without supervision.
-The charger is specific for lithium battery pack 36V and 6.4AH ( Model No.: X7BDH).
-The battery charger has an LED indicator GREEN light indicates the battery is fully charged or disconnected; RED I light indicates the battery is in charge.
– Do not recharge non-rechargeable batteries. It may cause an explosion.
-The protective cover is used to protect the charging port from splashing water. Be sure to replace the cap after each charge and before each use.
-Only use the charger supply ied with your electric scooter. Using a charger other than that supplied will in va I date the II warranty.
-To optimize the performance and lifetime o you’re electric scooter battery, fully charge the battery before using it for the firc time and fully charge it once a month.
-Do not cover the battery compartment or the charger there must be good ventilation conditions at all times during charging’
-The charging environment must be dean. Ensure there are no traces of da m p or water in the electric socket before plugging kl
-Ensure you use a standard socket
– Do not switch on the electron i«controlled r dud ng charging.
Option 2: Charging the battery independently
Remove your battery carefully as explained above (paragraph 7).
Plug the charger into the port at the bottom of the battery then follow the same instructions as in option 1 (above).

Warning. Do not use the battery or the device in the following cases:
1. The battery gives off a smell or the temperature inside the appliance is too high.
2. Leaks on the deck of the scooter.
If in doubt please contact your dealer immediately.
Important:
-The battery must only be removed and changed by your dealer. No attempt should be made to dismantle the product and repair it yourself. Any attempt to do so will invite I to date the warranty.
– In case of battery leakage, do not touch it
– Keep children away from the battery if it is leaking or displays any other problems.

Batteries contain dangerous substances. Do not attempt to open the battery to in certainty solid or liquid substance into the more mt yor into the body of the appliance. )
only Clobber is authorized to repair the appliance.
Jing the battery is subject to authorization by the local authorities.
– MAINTENANCE
unplug the power and turn off the product before servicing. Monthly maintenance and inspection of the product are required. laming. As with any mechanical component, your productis subject to high stresses and wear the various mate-cals and components may react differently to wear or fatigue, despite the evaluation of the resistance and fatigue! sts of the product according to EN14619. If the expected service lifeform component has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches, and discoloration in the areas subject i)high stresses indicate that the component has exceeded its service life and should be replaced. auction: the front wheel has a motorized part that can only be dismantled or changed by a qualified technician. o not change any motorized parts yourself for the warranty will be invalidated. Contactyourdealerfora qualified? clinician orcontactGlobber, contact@globber.com. Replacement of spare parts must be done with original parts to avoid any impact on the health and safety of the user. The lithium battery: To guarantee the battery lifetime, charge inappropriately when its level is low. If it is not used after a long if time, you are advised to charge it once a month. If you wish to check the battery ordiange, contact a qualified technician Ira Globber representative.
he recommended storage temperature for the battery is between 5°C and 30°C
lo, not use or place the electric scooter in an environment where the temperature exceeds40°Cto avoid any lithium battery malfunction which may lead to catching fire. never store the electric scooter in a car du RI ng hot weather to avoid any danger of this.
learnings: avoid riding through water, oil, or sand which would damage your bearings. To maintain your bearings, check u lady that the rear wheel to ms properly by turning the electric scooter upside down and pushing the wheel with your fingers. the lithe rear wheel does not, remove it and check the condition of the bearings. First, unscrew the wheel axle. remove the axle and remove the wheel. Carefully push the two bearings out of their seating. they’re chipped or crushed, my new ones. If there is no visible damage, oil them. To do so, remove any traces of grease, mud, or dust from the bearing sing a paper towel or doth then grease them either with a self-lubricating spray or by soaking them in oil overnight (turn the bearings several times in the oil before leaving them to soak). Refit the bearings and axle, then the rear wheel. wheels: the wheels wear out after a certain length of time or may even develop holes if the scooters are used on rough sur-3cestoo much. This is particularly true of the rear wheel on which the brake is applied. Check them regularly, check monthly, and have them changed for better safety.
product modifications : under no circumstances may the original product be modified apart from the maintenance stated in these instructions.
luts, axles, and others-long fasteners : check them regularly, check monthly. They may become loose over time. If they do, tighten them up. They may also become less effective. In this case, replace them with new ones.
10- DISPOSAL OF END-OF-LIFE APPLIANCE
The appliance must be disconnected from the main supply when removing the battery.
-The battery must be removed from the appliance before the appliance is discarded.
-The battery must be disposed of safely by taking it to the most suitable collection point.

TROUBLESHOOTING

Scooterimill not run

| The battery is not charged| Fully charge the battery. The first (ha large lakes approanstely4hours and up to 3 hours for recharges.
VrSresorconnectorsarelooseo unplugged| Check to ensure that the charger is securely plugged into both the wall socket and the gooter.
Scooter run-time is short

| The battery does not charge completely.| Fully charge the battery Thefirstchargetakes approximately4hourand up to 3 hags or recharges. Rated to ensure that the targets are securely plugged into both the wall socket and the jailer. Makesurethatthewall socket is connected to the mains power.
Battelyvill does not charge fully|

1 You have been using ur scooter for a battery has certainly lost its capacity. The average rechargeable battery life is 1 to 2yearsdepencring on soote rconditions and use, the maintenance (at least charging per month), and storage (dry place at temperature between 5 and 30 degrees) 2. Yourgooteris wand has lovraulonomy? In both rases (1 and 21the battery needs to be changed, please contact your dealer

Sauter suddenly stops working

| Egessi euseofscooters| Excess overload (a steep incline or the nder is too cheap)may have caused the motor toosu hea and trip the safety. Insul a sudden stop of the sootero aurs, turn off the scooter (put in the OFF position)and wait about a minute before being able to switch on the scooter again.
wires« onnectorsarelooseor unplugged| The E25 scooter is redesigned fonixt, rain or puddle use. your problem arises as a result of such usep4ease contact your dealer.
Scooter runs sluggishly

| Scooter’s overloaded| Bearehl not to overload the scoot beyond the maximum weight limit(103kg). Be careful, not trousers cooter on steep lopa and do not pull atowobjKts people. Avoid overloading the scooter as this will cause premature vear of the battery and its components.
Unsuitable riding conditions| Rideonbconsolid, flatten and thy surfacessu iasa bike path leads to ground.

MANUEL D’UTILISATION

APARTIRDE14ANS

POIDSELUTILISATEURMAX

Notice originale
Fabriqueen Chine

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>