PYLE PLMRWB65LEB RGB LED Speaker Installation Guide
- June 6, 2024
- Pyle
Table of Contents
INSTALLATION INSTRUCTIONS FOR
PLMRWB65LEW/PLMRWB65LEB
PLMRWB85LEW/PLMRWB85LEB
Product Technical Parameters
| MARINE SPEAKER MODEL | PLMRWB65LEW/PLMRWB65LEB |
|---|---|
| – 2-Way Mini Box Speaker System | 6.5″ |
| – Long Excursion Woofer | |
| – 1.07itanium Dome Tweeter | |
| – Heavy Duty ABS Construction | |
| – Quick Connect Speaker Terminals | |
| – Max Power | 200 Watts |
| – Magnet | 10 Oz |
| – Frequency Response | 40Hz-20KHz |
| – Impedance | 4 Ohms |
| – Sensitivity | 90 dB |
| – Dimensions(mm) | 217x217x230 mm (HxWxD) |
| MARINE SPEAKER MODEL | PLMRWB85LEW/PLMRWB85LEB |
| --- | --- |
| – 2-Way Mini Box Speaker System | 8″ |
| – Long Excursion Woofer | |
| – 1.0″Titanium Dome Tweeter | |
| – Heavy Duty ABS Construction | |
| – Quick Connect Speaker Terminals | |
| – Max Power | 260 Watts |
| – Magnet | 20 Oz |
| – Frequency Response | 30Hz-20KHz |
| – Impedance | 4 Ohms |
| – Sensitivity | 91 dB |
| – Dimensions(mm) | 252x252x245 mm (HxWxD) |
Mounting:
REMOTE CONTROL FEATURES
- Turn On / Standby: Press this key to turn on LEDs or switch to standby mode.
- / 9. Dynamic Mode button: Switch from dynamic mode to color mode or switch between dynamic modes.
- / 8. Dynamic Mode Speed button: Use these buttons to adjust dynamic mode speed If the unit is in static mode, pressing these buttons will switch the unit to dynamic mode.
- / 5. Static Color Adjust button: Use this button to switch between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.
- / 7. Brightness Adjust button: Pressing these buttons will adjust brightness whihle in static mode. If these buttons are pressed while the unit is in dynamic mode, it will switch to static mode.
- Demo Mode button: this button will switch the unit into demo mode. While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.
- Please remember to remove the plastic insulator from the remote unit battery compartment.
- This remote uses a 3-volt CR2025 type battery. When replacing be sure to use only the same type of battery
- The remote signal can pass through most obstacles.
- Do not Install units in areas surrounded by metal as the remote signal will not reach the unit.
For more detailed information visit us at:
PyleAudio.com
1600-63rd Street Brooklyn, NY 11204 USA 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>