Schwaiger Power Supply & Voltage Converter Instruction Manual

: June 6, 2024
: Schwaiger

Table of Contents

Intended use
General safety and maintenance instructions
Initial operation:
Output voltage (V)
Output current (mA)
Polarity
Technical data
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Schwaiger Power Supply & Voltage Converter Instruction Manual

Congratulations and thank you for purchasing this Schwaiger product. You will find useful information on handling this product below. Please read through the entire operating instructions carefully

Intended use

This product is an all-purpose plug-in adapter to supply power to small devices. You can use it to operate devices with the following operating voltages: 3V / 4.5V / 5V / 6V / 7.5V / 9V / 12 V Only the enclosed adapters can be used to connect the plug-in power supply.

General safety and maintenance instructions

This product is intended for private, non-commercial household use.
This product is an electronic product that must be kept away from children! Therefore, keep it out of reach of children.
The product is not intended for use by children, or by adults with visual or
other impairments preventing them from using it safely. In such cases, it should be used under supervision.
Protect the product from moisture, water, rain, snow or drizzle and use the product only in dry environments.
Never expose the product to high temperatures or extreme cold.
Keep the product in a dry place at a temperature of between 0° and 40°C.
Do not drop the product or expose it to strong vibrations.
Do not disassemble the product into its individual parts. The device does not contain any parts that require maintenance by the user. Incorrect assembly can cause electric shocks or malfunctions.
The product is not user serviceable, and any attempt to do so will invalidate the guarantee.
Stop using the product if the housing, cable or adapter is damaged.
Unplug the product before cleaning it!
The power supply unit must always be within reach and be easily accessible in order to disconnect the device from the mains in an emergency.
A faulty electrical installation or too high mains voltage can cause an electric shock.
Immediately unplug the power supply from the wall outlet if liquids or other foreign matter penetrate into the device.

For safety reasons and reasons related to official approvals (CE), you must not convert and/or modify the product. The product may become damaged if you use it for purposes other than the one previously described. Improper use can also pose hazards, such as a short circuit, fire or electric shock.

Initial operation:

Important

Before you connect the adapter to the device or the mains, ensure that the output voltage (V), output current (mA) and the terminal poles are correct for he device being used.

Output voltage (V)

Check first what output voltage the device to be connected requires. Then set the arrow on the yellow selection switch on the device‘s lower surface to the required voltage. The control elements on the device‘s lower surface ensure that the voltage cannot be changed when in mains operation. If the voltage is set too high, this may cause a defect or permanent damage to the connected device.

Output current (mA)

Ensure that the connected device does not consume more electricity than the adapter‘s maximum current allows. If the maximum current load is exceeded, the adapter may become permanently damaged due to overload. Use the following table to find the maximum current that the individual models in this range can transmit at different voltages.

Polarity

You will find the correct polarity for your device in the device manufacturer‘s operating instructions or in the embossed diagram on the device‘s mains coupling. Now select the appropriate connector plug for the device. You have the following 9 plug sizes to choose from:

2.5 mm / 3.5 mm / 5.0 x 1.0 mm / 5.5 x 2.5 mm / 3.5 x 1.35 mm / 5.5 x 1.5 mm / 4.0 x 1.7 mm / 2.35 x 0.75 mm / USB A connector

The polarity is indicated on either side of the connector (diagram below). After selecting the right polarity, insert the connector into the adapter connection coupling, so that the arrows point to one another.

Technical data

Model	NG600USB 011	NG1000USB 011
Power Input	100 V – 240 V ~ 50/60 Hz	100 V – 240 V ~ 50/60 Hz
Power Output	3.0 V __ 0.6 A (1.8 W)

4.5 V __ 0.6 A (2.7 W)

5.0 V __ 0.6 A (3.0 W)

6.0 V __ 0.6 A (3.6 W)

7.5 V __ 0.6 A (4.5 W)

9.0 V __ 0.6 A (5.4 W)

12.0 V __ 0.6 A (7.2 W)

| 3.0 V __ 1.0 A (3.0 W)

4.5 V __ 1.0 A (4.5 W)

5.0 V __ 1.0 A (5.0 W)

6.0 V __ 1.0 A (6.0 W)

7.5 V __ 1.0 A (7.5 W)

9.0 V __ 1.0 A (9.0 W)

12.0 V __ 1.0 A (12.0 W)

Power consumption at no load| max. 0.14 W| max. 0.08 W
Ecodesign specifications| See additional specification data sheet enclosed or for all power ranges at www.schwaiger.de
Application area| Indoor use

Cleaning

Clean this product only using a lint-free, damp cloth that is as light as possible and do not use any aggressive cleaning agents. In doing this, especially ensure that no water (no fluid or moisture) gets into the product.

Disposal

Do not dispose of batteries or electric and electronic devices in the normal household waste. The consumer is legally obliged to return electrical and electronic devices, and batteries that are at the end of their useful life to the point of sale or public collection points that have been set up for this purpose. Legislation in the country of use stipulate the specific requirements regarding disposal. The symbol on the product, user guide or the packaging indicates this legal requirement.