BESTEASY BE-G42S Label Printer User Guide

BESTEASY BE-G42S Label Printer User Guide

Packing List

Note: The packing materials are actually based on the order.

Appearance and Components

Front View

Rear View

Note: The views above are for your reference. Ports vary by your choice.

Inside View

Loading the Roll

1. Press the left and right cover open lever with hands simultaneously and lift the printer cover.                                                                                                   

2. Hold the paper roll shaft and take it out.                                       

3. Load the paper roll in the shaft.                                                 Note: When using 1-inch paper roll, the font of “1 CORE” should be upward; when
   using 1.5-inch paper roll, the axis should be turned 180 degrees and the font of
   “1.5 CORE” should be upward.

4. Then load the paper module from the top down to printer.                    

5. Pull some paper and pass the it through paper guides, adjust paper guides according to the paper width.                                                                                     

6. Press down the top cover until it closes.                                        

Power Connection

1. Make sure the printer is “OFF”
2. Connect the AC adapter to printer.
3. Connect the power cord to AC adapter.
4. Connect the other side of power cord to the socket outlet.

Note: tool and driver installation please refer to BE-G42S User Manual.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>