AZZA CSAZ-7000 Zircon Full Tower PC Case User Manual
- June 6, 2024
- AZZA
Table of Contents
- Specifications
- Chassis Parts
- Control Panel Functions
- Removing the side panel
- Removing the bottom dust filter
- Adjusting the video card holder
- 3.5″ HDD /2.5″ SSD Installation
- E-ATX(<270mm) motherboard Installation
- Cooling System Installation
- Parallel Connection (“daisy-chaining”)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZIRCON 7000
USER MANUAL
www.azzatek.com
Specifications
Model
Model Name:| ZIRCON 7000
Model Number:| CSAZ-7000
Specifications
Type:| ATX Full Tower
Color:| Black/Black(interior), White/White(interior)
Side Panel Window:| Tempered glass on both sides
Max CPU Cooler Height:| UP to 165mm
Max Video Card Length:| Up to 390mm long video card (Horizontal/ Vertical)
Power Supply:| Not included
Motherboard Compatibility:| E-ATX(<270mm) 、ATX 、Micro ATX
Expansion
External 5.25″ Drive Bays:| 0
Internal 2.5″ Drive Bays:| Up to 5
Internal 3.5″ Drive Bays:| Up to 5
Expansion Slots:| 8(Horizontal)+2(Vertical)
Top Ports:| Power button, reset button, HD Audio, USB 3.0 x 2,Type C
Physical Specifications
Case Dimensions (HxWxD):| 515 x 233 x 515mm / 20.3 x 9.2 x 20.3 inches
Weight:| 14.9kg /32.8lbs
Features
Tempered Glass Sides Window:| High-quality tempered glass side window allows
for clear visuals to inner components
Addressable RGB Light Effects:| Addressable RGB light I/O ports and strip on
the front panel. All Addressable RGB light
devices sync with the motherboard, allowing the motherboard software to
directly control
the lighting.
Available Fan Ports:| 3x120mm or 2x140mm Fan ports in the front
3x120mm or 2x140mm Fan ports on the top
1x120mm Fan port in the rear
(Included fan: Front – 1 x Black fan ; Rear – 1 x Black fan)
Water Cooling:| Supports radiators up to 280/360mm in the Front
Supports radiators up to 280/360mm on the Top
Dust Filters:| Removable (magnetic) dustproof net on the top and front,
slide-out dust filter on the
bottom of chassis.
Power Supply Support:| Bottom mounted ATX Power Supply
Others Features:| Cable management bar on both sides.
Can adjust the video cardholder to fit your system needs.
Pump bracket included, compatible with a 2.5″ SSD, or a 3.5″ HDD.
Chassis Parts
| 1 | Iron front panel |
|---|---|
| 2 | LED lens |
| 3 | The back panel of the front |
| 4 | Left side tempered glass panel |
| 5 | Right side tempered glass panel |
| 6 | Cable management cover |
| 7 | Adjustable video card holder |
| 8 | Cable management bar |
| 9 | Pump bracket |
| 10 | 3.5″HDD/2.5″ SDD brackets x2 |
| 11 | 3.5″HDD/2.5″ SDD spring bolt tray x2 |
| 12 | Removable magnetic dustproof net |
| 13 | Slide-out dust filter |
| 14 | Black fan x2 |
| 15 | Screws for iron front panel x2 |
| 16 | Screws for iron top panel x2 |
| 17 | Iron top panel |
Control Panel Functions
| Power| | Reset
---|---|---|---
| USB3.0(Blue)| | Audio
| USB3.0(Blue)| | USB Type C port
Removing the side panel
Removing the bottom dust filter
Adjusting the video card holder
| 
---|---
▪Remove the screws from the front cable management bar.| ▪Video cardholder can
be adjusted with the thumbscrews.
3.5″ HDD /2.5″ SSD Installation
| 
---|---
E-ATX(<270mm) motherboard Installation
To install the E-ATX(<270mm) motherboard, please take out the cable management bar.
Cooling System Installation
| 
---|---
Parallel Connection (“daisy-chaining”)
CAUTION
The addressable RGB fan has a 3-pin connector (4 holes). Please ensure that
you are connecting the 3-pin connector on the fan to the 3-pin RGB
header on the motherboard or RF Remote connector. Do not plug it into the
4-pin header, as the incompatible voltage will fry the fan. The 3-pin
The connector on the fan still has 4 holes, but the 4th hole is intentionally
blocked, for this reason, so please do not try to force it!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>