AZZA ZENO CSAZ-350 User Manual
- June 6, 2024
- AZZA
Table of Contents
ZENO
User Manual
Installation Instructions
Specifications
Model|
---|---
Model Name:| ZENO
Model Number:| CSAZ-350
Specifications|
Type:| ATX Mid Tower
Color:| Black/Black(interior)
Side Panel Window:| Left side panel: tempered glass with rubber mounts
Max CPU Cooler Height:| UP to165mm
Max Video Card Length:| Up to 320mm long video card
Power Supply:| Not included
Motherboard Compatibility:| <275mm EATX • ATX • Micro ATX • ITX
Expansion|
External 5.25″ Drive Bays:| 0
Internal 2.5″ Drive Bays:| Up to 4
Internal 3.5″ Drive Bays:| Up to 2
Expansion Slots:| 7
Top Ports:| Power button, reset button,led button, HD Audio, USB 3.0 x 1,
USB2.0x2
Physical Specifications| 475x210x410 / 18.7×8.3×16.1 inches
Weight:| 6kg /13.21bs
Features|
Tempered Glass Sides Window:| High-quality tempered glass side window allows
for clear visuals to inner components
Addressable RGB Light Effects:| Addressable RGB light strip in the front. All
Addressable RGB light devices sync with the motherboard, allowing the
motherboard software or LED button to directly control the lighting.
Available Fan Ports:| 3x120mm or 3x140mm Fan ports in the front(lx120mm ARGB
Fan included) 2x120mm or 2x140mm Fan ports on the top lx120mm Fan port in the
rear (1x120mm ARGB Fan included)
Water Cooling:| Supports radiators up to 280/360mm in the Front Supports
radiators up to 240mm in the Top
Dust Filters:| Removable (magnetic) dustproof net on the top , iron net on
bottom of chassis.
Power Supply Support:| Bottom mounted ATX Power Supply
Chassis Parts
| 1 | Removable (magnetic) dustproof mesh |
|---|---|
| 2 | 2.5″ SSD metal tray x 2 |
| 3 | Right side metal panel |
| 4 | Front panel |
| 5 | ARGB led light strip |
| 6 | Multifunctional hard disk bracket |
| 7 | Multifunctional hard disk cage |
| 8 | Steel dust filter |
| 9 | Sliding tempered glass panel |
Control Panel Functions
3.5 ˝/ 2.5˝ HDD/SSD Installation
Cooling System Installation
Front
Rear
Top
ARGB Control Modes Switching
※To control the front panel ARGB lighting modes, press the LED button to cycle
through 13 RGB lighting modes.
※Hold the LED button for 3 seconds to switch the RGB control function between
motherboard RGB software and LED button.
※To synchronize all addressable RGB light devices, it needs to be switched to
be controlled only by the motherboard.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>