CRYSTAL VIDEO Wireless Video Link PRO 800 User Manual

User Manual

This user manual applies to:
Transmitter: CC8980
Receiver: CC3865
Version:1.3

Important Information

Please read this user manual before you use this product, it contains all the notes and impor­tant things regarding operating this product. In accordance with the safety precautions and operating instructions listed on this user manual, our applies provided the product is handled properly for its intended use, but may not apply to the below cases:

• Repairs or product modification and alterations have been executed by unauthorized
• The damages are caused by accidents including but not limited to lightning, fire, exposure to rain or water, and moisture.
• Do not use provided power adapter with specific power voltages which is not compliant with the rated voltage range in the attached label of the power adapter in the package.
• The model label on the product has been modified or the warranty tag has been removed by unauthorized personnel.

safety Precaution

| To reduce the risks of electricity, do not remove or open the cover. No user-serviceable parts are inside. Please return to original factory for maintenance
---|---
| high temperature in the process of operating the device may cause a high risk of scalding.
| Please use our standard power adapter. Detailed information Please refer to the rated voltage range shown on the label at the back of the package’s power adapter.

Danger: Be careful with electricity.

• As connecting any equipment (such as any player or TV, etc.),

please turn off the power to the product before any operation is undertaken.

• Power outlet: To prevent electric shock or fire, short circuit, please make sure the type of electrical plug used on the receiver’s and transmitter’s power cord is compliant with the rated voltage range in the attached label of the power adapter in the package.
• Power cord: Do not place any heavy articles above on the power cord. To avoid being stepped on or pinched by heavy items, the power cord should not be located in the place where people pass by frequently.
• Power overloading: Avoid overloading the wall’s electrical outlets and extension cord or other multi-socket; otherwise could result in electric shock or fire.
• Lightning: For protection from lightning or when the product is left unattended for a long period, please disconnect it from the power source.
• Please disconnect the power cord from the power outlet when you are not using the receiver and transmitter, this will reduce the risk of electric shock or fire.

Warning

• This product should not be exposed to dripping or splashing. Do not place any object filled with liquid on the product(eg. vases).
• To avoid electric shock, please do not block or stick anything on the air vent of a product; do not remove the cover or put the object just like pins, steel wire into the gap of the air vent.
• Please place the receiver/transmitter on a flat with a hard and stable surface.
• Ventilation: please do not block the air vents on the receiver/transmitter or place any heavy object on top of them. Blocking the airflow can damage the product itself. Please make sure that there is adequate ventilation distance between the receiver and TV, and also put the product away from direct sunlight or any source of heat.
• Water Exposure: To reduce the risk of electric shock or fire, please do not expose the receiver/transmitter to rain or moisture.
• We assume no responsibility for any damage or result caused by using other adapters instead of our standard adapters

Special Notice

• Although the product has provided the function of data encryption when transmitting, you still need to pay attention to deliberate signal Interception. There will be the possibility of a third party intentionally intercepting the transmission signal since the product adopts wireless communication. Please do not use the product on confidential and important communications, or life-related communications The main concern is that the content of wireless communication might be received by the third party’s wireless devices deliberately or accidentally.
• The impact of radio waves (such as the following environment may cause abnormal audio and video(blocked image, noise …etc.).

1 ) Transmit near the wall which is hard for the radio waves to get through.

2 ) Quite close to the refrigerator, metal fitment, and appliances, or next to the crowded situation.

• This product has been tested and manufactured to comply with national electrical safety rules, however, there will be noise caused by the interference with other machines in rare If the interference happens, please keep a certain distance away from other machines.
• The product is susceptible to interference from 5GHz wireless local area networks or other wireless devices.
• The optimal range between transmitter and receiver is between 1 meter and 50 meters within line of sight indoor.
• Please do not set up the transmitter and receiver on a metal shelf, or it will hinder the wireless communications.
• 1080P/60 Hz Wireless transmitting.
• It will take 15-20 seconds to boot the system before wireless communication start, the media receiver can not be operated during this time.

About the User Manual

– Please read this manual carefully before you use this product and retain it properly for future reference.
– If there is any doubt or difficulty in the process of product usage, please feel free to contact us or the dealer.
– The company reserves the authority to amend the specification.

Brief Introduction

With the widespread use of live broadcasting, there is some problems that existed in the process of cable wirings, such as the high cost and short-life usage of the cable. Also, the cable trod by the crowd under insufficient site protection is the major cause of cable performance, even leading to the live broadcast accident. CVW provides you with a more convenient and safer solution for live broadcasting. The long-distance transmission system applied with the high-capacity Li-battery, plug-and-play setting, can fully meet the requirements of outdoor and indoor shooting. Especially, no cable wiring will bring a safer and more professional experience to you!

Features

• Effective range up to 800M, suitable for film shooting, live broadcast, wedding, and big conference use.
• Support 1080P/60Hz 4:2:2bit, uncompressed real-time HD video transmitting.
• Support HDMI/HD-SDI/3G-SDI.
• Plug&Play- easy to install.
• Support channel switching and broadcast mode for the transmitter to multiple receivers.
• Support SDI Time code transmitting, code formatATC_VITC, ATC_LTC.
• Support SDI Start/Stop transmitting.
• Compatible EDID 1.1, Support HDMI 1.3
• AES128Encryption

Packing List

Please check the packing list carefully after unpacking, if any part is missing, please contact your dealer. Accessories of all models are subject to the following packing list.

Specification

*Since the product’s improving process, all the performance, design, and specifications of our products are subject to minor change without prior notice.

Structure & Interface

Transmitter CC8980
TX

Structure

1| OLED Screen
| Display information about the Channel, Signal INPUT, Capacity, Signal status.
2| Channel Switch
| Select the correct Channel
3| HDMI/SDI Signal Switch
| Switch HDMI or SDI Signal as the signal source
4| OK For Confirm
| OK For Confirm the selection
5| Power Supply IN(Lemo)  support 6-17V
| Support connecting to the power supply of the camera, or power adaptor Notice: DO Make sure the Voltage (+)(-) was connected correctly.
6| HDMI OUT
| Connect to the HD Digital Camcorder with HDMI OUT
7| SDI OUT(Loop)
| Connect to the HD Digital Monitor which supports 3G-SDI, HD-SDI
8| SDI IN
| Connect to the HD Camcorder which supports 3G-SDI, HD-SDI
9| Antenna Socket
| SMA socket to connect the antenna
10| V-Mount Connection Optional
| Support V-Mount Connection
11| 1/4 Hot-shoe Connection
| Support to connect with more methods
12| Power ON/OFF
| Power ON/OFF
13| Mini USB
| For system updating

Since the product’s improving process, all the performance, design, and specifications of our products are subject to minor change without prior notice.

Structure

Transmitter CC3865
RX

Structure

1| OLEDScreen
| Display information about the Channel. Signal INPUT. Capacity, Signal status.
2| Channel Switch
| Select the correct Channel
3| HDMI/SDI Signal Switch
| Switch HDMI or SDI Signal as the signal source
4| OK For Confirm
| OK For Confirm the selection
5| SDI OUT(Loop)
| Connect to the HD Digital Monitor which supports 3G-SDI. HD-SDI
6| HDMI OUT
| Connect to the HD Digital Camcorder with HDMI OUT
7| Antenna Socket
| SMA socket to connect the antenna
8| V-Mount Connection Optional
| Support V-Mount Connection
9 ,10| 1/4 Hot-shoe Connection
| Support to connect with more methods
11| Mini USB
| For system updating
12| Power Supply IN(Lemo)  support 6-17V
| Support connecting to the power supply of the camera, or power adaptor

Notice: DO Make sure the Voltage (+)(-) was connected correctly.

13| Power ON/OFF
| Power ON/OFF

• Since the product’s improving process, all the performance, design, and specifications of our products are subject to minor change without prior notice.

Product Installation TX

For transmitter

1. Fix on the antennas to the transmitter, and arrange them to be right angle as figured below.
   

2. Connect the transmitter to the power supply via a certain power cable. Connect the SDI/HDMI cable to the HD Video Source.
   

3. Turn ON the power supply and make sure the transmitter starts to work.
   

4. Press the “CH” button to select the wireless channel that corresponds to the Receiver, then press the “OK” button to confirm. When the video signal is normally transferred, the OLED Screen will display “VIDEO” ;
   

5. Transmitter support long pressing “HDMI/SDI” key to manually switch SDI audio mode. When there is no audio from SDI input, you can manually switch SDI audio mode. This function is only valid for the SDI interface and does not affect the HDMI interface.
   

For Receiver RX

1.  Fix on the antennas to the receiver, and arrange them to be right angle as figured below.
   

2.  Connect the receiver to the power supply via a certain power cable. Connect the SDI/HDMI cable to the TV/Monitor.
   

3. Turn ON the power supply and make sure the receiver starts to work.
   

4. Press the “CH” button to select the wireless channel that corresponds to the Transmitter, then presses the “OK” button to confirm. When the video signal is normally transferred, the OLED Screen will display “VIDEO” When the Networking is normally connected, the OLED Screen will display “LINK”. Then the screen of the TV/Monitor will display the HD images simultaneously from the video source.
   

5. Long press HDMI/SDI: LAN high and low gain switching, “H” for high gain, “L” for low gain.
   Short press HDMI/SDI: switch ALL/HDMI/SDI video output interface.

OLED Display Description

Signal source input: Auto/HDMI/SDI.
Power Info: Display the current power supply status.
Channel NO.: Display the current Channel NO. of the device.
Wireless Signal: Display the networking signal status.
Sound Mode: mode 0, display nothing, mode 1 displays melody logo.
VIDEO: VIDEO means the video signal is OK.
If the screen does not have any operation, it will automatically enter the screensaver mode after three minutes.

CC3865 OLED Screen
Video output interface:

Video output interface: ALL/HDMI/SDI.

Power Info: Display the current power supply status. Channel NO.: Display the current Channel NO. of the device.

Gain state:H/L:
“L” is the low-gain mode, application for short-distance transmission, good ability to anti-jamming;

“H” is the high-gain mode, application for long-distance transmission, normal ability to anti-jamming;

Wireless Signal: Display the networking signal status.

Wireless LINK: LINK means the wireless connecting is OK

Video Connect: When connection failed , displays nothing; When connection normally, displays”VIDEO”

If the screen does not have any operation, it will automatically enter the screensaver mode after three minutes.

Support Full PSF Resolution

Support Full PSF Resolution

Antenna Installation Recommendations

In order to get the best wireless communication quality and achieve the best transmission effect, the installation of the device should meet the following requirements.

1. It is necessary to install the transmitter and receiver at least5 meters above the ground. the height of the receiver and transmitter should be consistent.
2. There is no barrier between transmitter and receiver
3. The plane of transmitter antennas toward the plane of receiver antennas face-to-face, not vertical or

Recommended Installation Method under Ideal Position

Make receiver stand vertically; adjust antennas to a fan-shaped arrangement Make transmitter to stand vertically; adjust antennas to 90°angle in the same plane The plane of transmitter antennas toward the plane of receiver antennas face-to-face

Recommended Installation Method under Non-ideal Position

When the front side of the transmitter is not able to face the receiver, please try to adjust the direction of transmitter antennas to make sure that the formative fan-shaped arrangement can face the receiver for the best signal transmission. As shown in diagram 1 and diagram 2

Because TX and RX are working on the ISM band, wireless transmission performance is relevant with the level of interference intensity.of transmission performance declines, we recommend switching the wireless channel of TX and RX simultaneously for improvement of transmission performance.

Trouble Shooting

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example use only shielded interface cables when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Cautions!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.|
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>