AZZA NOIR CSAZ-130 User Manual
- June 6, 2024
- AZZA
Table of Contents
NOIR
User Manual
Installation Instructions
- Specifications
- Chassis Parts
- Control Panel Functions
- 3.5″HDD/ 2.5″ SSD Installation
- Cooling System Installation
- Remove the Front Panel Instructions
- RGB Lighting Switching
- Fan Installation
Specifications
Model
Model Name:| NOIR
Model Number| CSAZ-130
Specifications
Type:| Micro ATX Mid Tower
Color:| Black(exterior)/black(interior)
Side Panel Window:| Left side panel: tempered glass with rubber mounts
Max CPU Cooler Height:| UP to 165mm
Max GPU Length| Up to 300mm long video card
Power Supply Support:| Bottom mounted ATX Power Supply
Motherboard Compatibility:| Micro ATX
Expansion
External 5.25″ Drive Bays:| 0
Internal 2.5″ Drive Bays:| Up to 6
Internal 3.5″ Drive Bays:| Up to 2
Expansion Slots:| 4
Top Ports:| Power button, LED button, HD Audio, USB 3.0 x 1, USB2.0x2
Physical Specifications
Case Dimension (HxWxD)| 397x215x404mm/15.6×8.5×16 inches
Weight:| 4.3kg /9.51bs
Features
Outer Appearance:| High-quality tempered glass side window allows for clear
visuals to inner components
Addressable RGB Light Effects:| All ARGB light devices sync with the
motherboard, allowing the motherboard software or LED button to directly
control the lighting.
Available Fan Ports:| 3x120mm fan ports in the front (1 x 120mm LFO-3212D ARGB
fan included) 2x120mm or 2x140mm fan ports on the top
lx120mm fan port in the rear(‘ x 120mm LFO-3212D ARGB fan included)
Water Cooling:| Supports radiators up to 240mm in the front
Dust Filters| Removable (magnetic) dustproof net on the top, iron net on the
bottom of chassis.
Chassis Parts
| 1 | Front panel |
|---|---|
| 2 | Right side panel |
| 3 | Removable (magnetic) dustproof net |
| 4 | The left side tempered glass panel |
| 5 | Screws for side glass panel |
| 6 | Case feet |
| 7 | 3.5″HDD brackets X2 |
| 8 | 2.5″SSD brackets X2 |
Control Panel Functions
3.5″HDD/ 2.5″ SSD Installation
Cooling System Installation
|
---|---
Remove the Front Panel Instructions
RGB Lighting Switching
Fan Installation
| CONNECTOR| CONNECTION
---|---|---
1| LED S/W (2p n)| LED Botton
2| ARGB LED 5V (3pin)| Motherboard: MSITM, ASUSTM, and ASROCKTM
3| ARGB LED 5V (VDG)| Motherboard: GigabyteThi
4| Fan Connector| 1st fan connect to 2nd fan
5| SANTA| Power Supply
※Press the LED button to cycle through different RGB lighting modes, controlled by the LED button.
※Hold the LED button for 3 seconds to switch the RGB control function between motherboard RGB software and LED button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>