Aurora AC6923 Star Night Light with Bluetooth Speaker User Manual
- June 6, 2024
- Aurora
Table of Contents
AC6923
Fantasy Aurora Star light
Manual 
Unpacking inspection:
Thank you for purchasing our product, please read the Instruction manual
carefully before use.
The Instruction manual contains necessary safety recommendations and user
instructions. Please operate in accordance with the instruction manual to
avoid damage to the product due to misoperation. When you receive the product,
please check whether the product is damaged.
Accessories description
Key Description
Remote control button description
Product parameter
Single point laser power: less than 114W I Power consumption: 7-10W
LED light source: Aurora 1″ 4W Moon 1°3W
Power input: 100-240V AC50-60112 US8 DCSW2000mA
Working temperature: -4°F n 104°F (-20°C RG 40°C)
Projection area: 215 P., 861 square feet (20°C~80°m2 )
(The laser is harmful to the eyes, please do not look directly)
statement:
This product has undergone comprehensive and rigorous testing before
leaving the factory, and users should strictly follow the warnings and
instructions. Incorrect use will cause damage to the product, which Is not
covered by our company’s warranty.
Strictly follow this operating instruction and do not disassemble the host and
accessories. This product has a 4-hour automatic shutdown function, can work
continuously for 4 hours, and automatically shut down.
When the product is connected to the power source, it can memorize the last
setting, and turn it on again to keep the same settings as before the last
shutdown; if the power is disconnected, the factory settings will be restored.
(Except for timing, each time you turn on the machine, it will be turned off
after 4 hours of scheduled work)
**Bluetooth connection
**
After pressing the lamp body or remote control Bluetooth button, it prompts
“Bluetooth mode”, Turn on the Bluetooth of the mobile phone, searches for the
Bluetooth model “AC6923”, select the connection, and “Bluetooth connection”
will be prompted after the connection is successful.
Warning:
Do not let children operate this product alone. Please refer to the safety
instructions before operation. This product is suitable for Indoor/night/dark
environments, If It is outdoor/daytime/strong light, the effect of the product
is not so good.
The waterproof grade Is IP20, which is suitable for dry environments. Please
avoid using in humid environments and avoid water Ingress, otherwise, it may
cause the lamp body to burn out. The minimum and maximum ambient temperatures
to maintain the normal and stable operation of the product are -20°C and 40°C
respectively. If the temperature Is too low, the laser may not light up.
Please use an adapter that meets the requirements of this product. Please use
a DC SV/2A power adapter. If the Current IS too small, the lamp body will not
work normally; If the current exceeds the range, please use a regulator
device, otherwise, it will affect its service life. The remote control needs
to add a MA battery, the battery is purchased by yourself. Pay attention to
the drop, otherwise, the laser module may be damaged, and the laser will not
turn on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>