SONY MDR-E9LP In Ear Headphone Instruction Manual

June 6, 2024
Sony

SONY logo Stereo Headphones
MDR-E9LP
Operating Instructions

SONY MDR-E9LP In Ear Headphone

Feature

300 kJ/m3 high power neodymium magnet is used to reproduce powerful bass sound.

How to use

  • Wear the earpiece marked R in your right ear and the one marked L in your left ear.
    There is a tactile dot on the unit marked L to distinguish the left side.

  • Tactile dot

  • If the headphones do not fit your ears, put on the supplied earpads.

Specifications

Type: Open, dynamic
Driver units: 13.5 mm (CCAW), dome type
Power handling capacity: 100 mW (IEC*)
Impedance: 32 Ω at 1 kHz
Sensitivity: 104 dB/mW
Frequency response: 18 – 22,000 Hz
Cable: Approx. 1.2 m (47 1/4 in), Y-type
Plug: L-shaped stereo mini-plug
Mass: Approx. 6 g (0.22 oz.) without Cable
Supplied accessories: Earpads (2)

  • IEC = International Electrotechnical Commission Design and specifications are subject to change without notice.

Precautions

High volume may adversely affect your hearing.
Do not use the unit while walking, driving, or cycling. Doing so may cause traffic accidents.
Do not use in hazardous areas unless the surrounding sound can be heard.
There is a danger that small parts may be swallowed. After use, store in a location out of reach of small children.
Note about static electricity
If you use the unit when the air is dry, you may experience discomfort due to static electricity accumulated on your body. This is not a malfunction of the unit. You can reduce the effect by wearing clothes made of natural materials that do not easily generate static electricity.
The earpads may be damaged or deteriorate with long-term use and storage.
Notice for customers: the following information is only applicable to products sold in countries applying EU directives and/or the UK applying relevant statutory requirements.
This product has been manufactured by or on behalf of Sony Corporation.
EU and UK Importer: Sony Europe B.V.
Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkan toor van Sony Europe B.V., Da Vincilaan 7-D1, 1930
Zaventem, Belgium.
Inquiries to the UK Importer or related to product compliance in the UK should be sent to the manufacturer’s authorized representative, Sony Europe B.V., The Heights, Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.

CE and Uk Symbol
Disposal of old electrical & electronic equipment (applicable in the European Union and other countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

 SONY MDR-E9LP In Ear Headphone-sn
4-448-414-17(1)
©2016 Sony Corporation Printed in Vietnam

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals