hama 179808 Replacement Remote Control for Philips TVs Instruction Manual

: June 6, 2024
: Hama

Replacement Remote Control
PANASONIC TVs
Operating Instructions
hama 179808 Replacement Remote Control for Philips
TVs- Art.Nr.: 00179808

Replacement Remote for PANASONIC SERIES: TV/LCD/LED/HDTV

hama 179808 Replacement Remote Control for Philips TVs-
3D

Thank you for your decision for the Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for futurereference.
This remote control can by default control 90% of models of the PANASONIC brand, there´s no need to set it up. lf the remote doesn‘t work, please choose one of the setup methods described in chapter 5.
The keys

1. Power TV ON/OFF/LED
2. Turn your TV sound ON/OFF
3. TV Mode
4. AV Mode
5. Streaming app menu
6. LINK
7. Show the Electronic Program Guide (if supported by the TV)
8. Tools menu
9. HOME| 10. Exit Menu
11. Menu
12. Internet
13. SD/USB Mode
14. Option and Tools
15. Back key
16. Enter
17. Use when watching TV to see what´s on other channels or to highlight/
select On-Screen options
---|---
18. Use to select a variety of on-screen options
19. Volume +/20.
Program +/21.
Teletext ON/OFF
22. Teletext Subtitle
23. Teletext Info
24. Teletext Hold
25. Numeric keys 0–9toenter channel numbers
26. Access to 2- or 3-digit channel numbers
27. Previous Channel
28. Info| 29. Normal
30. PictureSize
31. Goes backward(DVD, BlueRay … )
32. Play adisc (DVD, BlueRay … )
33. Fast Forward(DVD, BlueRay …)
34. Player Preview (DVD, BlueRay …)
35. Player Next (DVD, BlueRay …)
36. Suspends play and stops on an image (DVD, BlueRay…)
37. 3D Mode ON/OFF
38. Stop the disc (DVD, BlueRay … )
39. Record

Explanation of the Note and Warning symbol

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

Replacement Remote Control
2x AAA Batteries
These operating instructions incl. Code List

Sicherheitshinweise

Do not use the remote control in moist or wet environments and avoid spray water contact.
Do not expose the remote control to heat sources or direct sunlight.
Do not drop the remote control.
Never open the remote control. It contains no user-serviceable parts.
As with all electrical devices, keep the remote control away from children.

Warning

When inserting batteries note the correct polarity (+ and -markings) and insert the batteries accordingly. Failuretodosocould results in the batteries leaking or exploding.
Do not short-circuit batteries.
Do not charge batteries.
Do not throw batteries in a fire.
Keep batteries out of the reach of children.
Do not allow children to change batteries without supervision.
Remove the batteries from products that are not being used for an extended period.

Getting started –Installing the Batteries

Note

Use 2AAA batteries
Remove the battery cover from the bottom of the remote.
Check the +/- polarity on the batteries and inside the compartment.
Insert the batteries.
Slide the battery holder back into the remote until the clips locate.

Note –Code Memory

This remote control saves the settings during battery change.

Setup

This remote control can by default control 90% of models of PANASONIC brand, there´s no need to set it up. lf it doesn‘t work, please choose one of the following setup methods 5.1 or 5.2.

INPUT CODE

CODE List: 001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011, 012, 013, 014, 015, 016, 017, 018, 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 031, 032, 033, 034, 035, 036, 037, 038, 039, 040, 041, 042, 043, 044, 045, 046, 047, 048

Press and hold the key [MUTE] and [POWER] until the LED will be lit, then release keys.
Enter the three codes from code Iist. When the code input is finished, the LED will turn off.
Please try to use the remote control. lf it doesn‘t work well, please try other codes: [002], [003], [004] …

Note

If the code is invalid, the LED flashes twice and then lights up permanently. To exit the setup, please press [MUTE].

FAST SEARCH

Press and hold the key [MUTE] and [POWER] until the LED will be lit, then release the keys.
Press the key [CH+]. Each time you press, the remote will search once.
When the code changes, you can test if [POWER], [VOL+],[MENU],[0-9] keys work well. If ok , please press [MUTE] to save the code and exit.
lf it doesn‘t work well, repeat the fast search by pressing [CH+].

CODE INQUIRY

Use the following method to find out which code is currently set:

Press and hold [MUTE], then press [POWER] until the LED will be lit, then release keys.
Input [9].[9].[0] with number keys. The LED will flash twice and goes off.
Press the number key 1for the 1st digit of the code. The LED will start to flash. Count the LED flashes. The number of flashes resembles the code‘s first digit. Repeat this procedure for the 2nd and 3rddigit of the code: 2nd digit -> enter 2 ->count LED flashes 3rddigit -> enter 3 ->count LED flashes lf code number is [0] the LED will not flash.

Compatible Remote Control Model

Due to too many remote control models, we only Iist some of them below. lf your remote control is similar to the drawing, the replacement remote can control your TV (Page 47).

Resetting to factory settings

Press and hold the [RETURN] and [0] buttons for about 5seconds until the status LED flashes three times and then goes out. The remote control is now successfully reset to the factory settings.

Note

All keys with learned codes or copied keys, as well as all remote control settings will be deleted.

LEARN MODE

This remote control is equipped with a learning function. Thus, you could learn the functions of your original remote to this remote control.

BEFORE STARTING TO LEARN MODE

The batteries in the two remote controls have to be in good condition. Replace them if necessary.
Place the remote controls with the infrared diodes so that they point towards each other.
Where necessary adjust the height of both remotes so that infrared diodes are properly aligned.
The distance between the remote controls should be about 3cm.

Note

Do not move the remote controls during the learning procedure.
Ensure that the room is not lit by fluorescent tubes or low energy consumption lamps since such light sources could interfere with the copying.
The 2remotecontrols must be at least 1meter away from any light source.
During learning mode, if no key is selected for more than 15 seconds, the learning mode will exit automatically or if no other remote signal is received.
Each function key will hold only one command. The new command to be learned will automatically replace the previous one.

ENTER LEARN MODE

Press and hold the [MUTE] and [VOL+] keys for approx. 5seconds until the LED will be lit.
Enter the code [9] [8] [0], the LED will flash 2times and then remain on.
The remote control is now ready to learn new commands.

LEARNING OF KEYS

Press and release the desired key on the original remote control which you want the command to be learned. The LED at your replacement remote will flash to confirm that the information has been received.
Then press and release the target key on the remote control you want to be learned.
If the LED flashes 3times and then remains on, the command has been learned successfully.
Repeat these steps to learn other key functions.
Press the [MUTE] and [VOL-] buttons to save all learned functions and to exit the learning mode.

Note

While replacing the batteries, the remote control will keep the functions of the learned keys.

CLEARING OF LEARNED KEYS

6.4.1 CLEARING OF ONE LEARNED KEY

Press and hold [MUTE] and [VOL+] keys for 5seconds until the LED will be lit.
Enter the code [9] [8] [1], the LED will flash 2times and then remain on.
Press and release the desired key at the replacement remote control which you want to clear the learned command. If the LED flashes 3 times, the learned command has been cleared successfully.

6.4.2 CLEARING OF ALL LEARNED KEYS

Press and hold [MUTE] and [VOL+] keys for 5seconds until the LED will be lit.
Enter the code [9] [8] [2], the LED will flash 2times and then remain on.
Press and release the [OK] key at the replacement remote control. If the LED flashes 3times, all commands have been cleared successfully.

EASY Mode

This remote control is equipped with an Easy Mode. Thus you could reduce the functionality of the remote control to its basic functions. It avoids that the TV Settings are changed by mistake.
During the EASY Mode you still could use the following keys:

| Power TV ON /OFF
Volume +/Turn
your TV sound ON/OFF
Program +/-
Numeric keys 0–9toenter channel numbers
---|---
| Teletext ON/OFF

Use to select a variety of on-screen options

| Show the Electronic Program Guide (if supported by the TV)
TV/AVMode
Exit Menu

Enter EASY Mode

Press and hold [MUTE] and [VOL+] keys for 5seconds until the LED will be lit.
Enter the code [9] [7] [0], the LED will flash two times and then remain on.
Press and release the [OK] key,filed flash 3times, you have entered the EASY Mode successfully.

Exit EASY Mode

Press and hold [MUTE] and [VOL+] for 5seconds until the LED will be lit.
Enter the code [9] [7] [0], the LED will flash two times and then remain on.
Press and release the [EXIT] key, filed flash 3times, you have to exit the EASY Mode.

Note

While the EASY Mode is activated only the keys are mentioned in chapter 7. will work. If one of these keys is pressed the LED will be lit until the key is released. If one key is pressed during the normal mode, the LED will flash.

Maintenance

Do not mix new and used batteries for powering the remote control, as old batteries tend to leak and may cause power drain.
Do not use corrosive or abrasive cleansers on your remote control.
Keep the remote control dust-free by wiping it with a soft, dry cloth.

Troubleshooting

Q. My Universal remote control does not work at all!
A. Check your TV. If the TV main switch is turned off, your Remote cannot operate your TV.
A. Check whether your batteries are inserted properly and are in the correct +/- position.
A. If the batteries are low, replace the batteries.
Q. My TV responds only to some of the commands.
A. Try other codes until most keys work properly.
Q. Some keys of the remote control do not work anymore?
A. Maybe the EASY Mode had been activated. Deactivate the EASY Mode as explained in chapter 7.2.

Warranty Disclaimer

The manufacturer assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here: www.hama.com

Recycling Information

Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

Hama GmbH &CoKG
86652 Monheim/Germany
www.hama.com

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Documents / Resources

| hama 179808 Replacement Remote Control for Philips TVs [pdf] Instruction Manual
179808, Replacement Remote Control for Philips TVs, 179808 Replacement Remote Control for Philips TVs, Remote Control for Philips TVs
---|---