microlife Non Contact Thermometer NC400 Instruction Manual

: June 6, 2024
: microlife

Table of Contents

Read User Manual Online (PDF format)
Download This Manual (PDF format)

microlife Non Contact Thermometer
NC400 IB NC 400 S-V11 5020
Revision Date: 2020-11-20www.micro life.com NC400
Non-Contact Thermometer
Microlife NC 400

Microlife NC 400 microlife Non Contact Thermometer NC400 -
fig1

Microlife Non-Contact Thermometer NC 400

Measuring sensor
Tracking light
Protective cap
Display
MEMO-button (memory)
MODE button
START/IO button
Battery compartment cover
All segments displayed
Ready for measuring
Measurement complete
Body mode
Object mode
Low battery indicator| Changing between Celsius and Fahrenheit
Recall mode
Recall the last 30 readings
Measured temperature too high
Measured temperature too low
Ambient temperature too high
Ambient temperature too low
Error function display
Blank display
Flat battery
Date/Time
Beeper function setting
Replacing the battery
---|---

Read the instructions carefully before using this device.
Type BF applied part

This Microlife thermometer is a high-quality product incorporating the latest technology and tested in accordance with international standards. With its unique technology, this device can provide a stable, heat-interference-free reading with each measurement. The device performs a self-test every time it is switched on to always guarantee the specified accuracy of any measurement. This Microlife thermometer is intended for the periodic measurement and monitoring of human body temperature. This thermometer has been clinically tested and proven to be safe and accurate when used in accordance with the operating instruction manual. Please read through these instructions carefully in order for you to understand all functions and safety information.

1. The Advantages of this Thermometer

Measures in a matter of seconds
The innovative infrared technology allows the measurement without even touching the object. This guarantees
safe and sanitary measurements within seconds

Multiple uses (wide range of measurement)
This thermometer offers a wide range of measurement from 0.1 – 99.9 °C / 32.2 – 211.8 °F, meaning the unit can be used to measure body temperature or it also has a feature allowing it to be used to measure the surface temperature of the following examples:

Milk surface temperature in a baby’s bottle
The surface temperature of a baby’s bath
Ambient temperature

Accurate and reliable

The unique probe assembly construction incorporates an advanced infrared sensor, ensuring that each measurement is accurate and reliable.
Gentle and easy to use

The ergonomic design enables simple and easy use of the thermometer.
This thermometer can even be used on a sleeping child without causing any interruption.
This thermometer is quick, therefore child-friendly.

Multiple readings recall
Users will be able to recall the last 30 readings with a record of both time and date when entering the recall
mode, enabling efficient tracking of temperature variations

Safe and hygienic

No direct skin contact.
No risk of broken glass or mercury ingestion.
Completely safe for use on children.

Fever alarm

10 short beeps and a red LCD backlight alert the patient that he/she may have a temperature equal to or higher than 37.5 °C.
2. Important Safety Instructions

Follow instructions for use. This document provides important product operation and safety information regarding this device. Please read this document thoroughly before using the device and keep it for future reference.
This device may only be used for the purposes described in these instructions. The manufacturer cannot be held liable for damage caused by the incorrect application.
Never immerse this device in water or other liquids. For cleaning please follow the instructions in the
«Cleaning and Disinfecting» section.
Do not use this device if you think it is damaged or notice anything unusual.
Never open this device.
A basic physiological effect called vasoconstriction can occur in the early stages of fever, resulting in a cool skin effect. The recorded temperature using this thermometer can, therefore, be unusually low.
If the measurement result is not consistent with the patient’s finding or unusually low, repeat the measurement every 15 minutes or double-check the result by another core body temperature measurement.
This device comprises sensitive components and must be treated with caution. Observe the storage and operating conditions described in the «Technical Specifications» section.
Ensure that children do not use this device unsupervised; some parts are small enough to be swallowed.
Do not use this device close to strong electromagnetic fields such as mobile telephones or radio installation. Keep a minimum distance of 3.3 m from such devices when using this device.
Protect it from:
– extreme temperatures
– impact and dropping
– contamination and dust
– direct sunlight
– heat and cold
If the device is not going to be used for a prolonged period the batteries should be removed.

WARNING: The measurement results given by this device are not a diagnosis. It is not replacing the need for the consultation of a physician, especially if not match the patient’s symptoms. Do not rely on the measurement result only, always consider other potentially occurring symptoms and the patient’s feedback. Calling a doctor or an ambulance is advised if needed.
WARNING : This device is not a toy! Keep out of reach of children and do not leave children alone during use.

3. How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from the forehead as well as objects. This energy is collected through the lens and converted to a temperature value

4. Control Displays and Symbols

All segments displayed 9: Press the START/IO button 7 to turn on the unit; all segments will be shown
for 1 second.
Ready for measuring AT: When the unit is ready for measuring, the «°C» or «°F» icon will keep flashing while the mode icon (body or object) will be displayed.
Measurement complete AK: The reading will be shown on the display 4 with the «°C» or «°F» icon and the mode icon steady. The unit is ready for the next measurement as soon as the «°C» or «°F» icon is lashing again.
Low battery indicator AN: When the unit is turned on, the «battery» icon will keep flashing to remind the user to replace the batteries.

5. Setting Date, Time, and Beeper Functions

Setting the date and time

After the new batteries are fitted, the year number flashes in the display BO. You can set the year by pressing the MEMO button 5. To confirm and then set the month, press the MODE button 6.
Press the MEMO button 5 to set the month. Press the MODE button 6 to confirm and then set the day.
Follow the previously mentioned instructions to set the day, hours and minutes.
Once you have set the minutes and pressed the START/ IO button 7, the date and time are set and the time is displayed.

If no button is pressed for 20 seconds, the device automatically switches to ready for measuring AT.
Cancel time setup : Press the START/IO button 7 during time setup. The LCD will show Date/ Time icons with «–:–». After that press the START/IO button 7 to start the measurement. If no further action is taken within 30 seconds, the device will automatically turn off.
Change current date and time : Press and hold the MODE button 6 for approx. 8 seconds until the year number starts to flash BO. Now you can enter the new values as described above.

Setting the beeper

1. Press and hold the MODE button 6 for 3 seconds to set the beeper BP.
2. Press the MEMO button 5 to either turn the beeper on or off. The beeper is activated when the beeper icon BP is shown without a cross.
When the beeper setting has been chosen, press the START/IO button 7 to enter the «ready for measuring» mode; otherwise, the device automatically switches to ready for measuring after 10 seconds AT.

6. Changing between Body and Object Mode

1. Press the START/IO button 7. Display 4 is activated to show all segments for 1 second.
2. The default mode is body mode AL. Press the MODE button 6 to switch to object mode AM. For switching
back to body mode, press the MODE button again.

7. Directions for Use
Always remove the protective cap 3 before use.

Measuring in body mode

Press the START/IO button 7. Display 4 is activated to show all segments for 1 second.
When the «°C» or «°F» icon is flashing, a beep sound is heard and the thermometer is ready for measuring AT.
Remove any hair, sweat, or dirt from the forehead before measuring to ensure the accuracy of the reading
Aim the thermometer at the center of the forehead with a distance of no more than 5 cm.
Press the START/IO button 7 and ensure that the activated blue tracking light is aimed at the center of the forehead. After 3 seconds a long beep will verify the completion of measurement.
Read the recorded temperature from the LCD display.
For the next measurement remove the thermometer from the forehead and wait until the «°C»/«°F» icon is flashing. Follow steps 4-5 above.
Press and hold the START/IO button 7 for 3 seconds to turn off the device; otherwise, the device will automatically switch off after approx. 30 seconds.

Measuring in object mode

Press the START/IO button 7. Display 4 is activated to show all segments for 1 second.
Press the MODE button 6 to switch to object mode.
When the «°C» or «°F» icon is flashing, a beep sound is heard and the thermometer is ready for measuring AT.
Aim the thermometer at the center of the object you want to measure with a distance of no more than 5 cm. Press the START/IO button 7. After 3 seconds a long beep will verify the completion of measurement.
Read the recorded temperature from the LCD display
For the next measurement wait until the «°C»/«°F» icon is flashing and follow steps 4-5 above.
Press and hold the START/IO button 7 for 3 seconds to turn off the device; otherwise, the device will automatically switch off after approx. 30 seconds.

NOTE:

Patients and thermometers should stay in similar room condition for at least 30 minutes.
Don’t take a measurement while or immediately after nursing a baby.
Don’t use the thermometer in high humidity environments.
Patients should not drink, eat or exercise before/while taking the measurement.
Don’t move the measurement device from the measuring area before hearing the termination beep.
10 short beeps and a red LCD backlight alert the patient that he/she may have a temperature equal to or higher than 37.5 °C.
Always take the temperature in the same location, since temperature readings may vary according to location.
Doctors recommend rectal measurement for newborn infants within the first 6 months, as all other measuring methods might lead to ambiguous results. If using a noncontact thermometer on those infants, we always recommend verifying the readings with a rectal measurement.
In the following situations it is recommended that three temperatures are taken with the highest one taken as the reading:
1. Children under three years of age with a compromised immune system and for whom the presence or absence of fever is critical.
2. When the user is learning how to use the thermometer for the first time until he/she has familiarized himself/herself with the device and obtains consistent readings.
3. If the measurement is surprisingly low.

Readings from different measuring sites should not be compared as the normal body temperature varies by measuring site and time of day , being highest in the evening and lowest about one hour before waking up.
Normal body temperature ranges:
– Axillar: 34.7 – 37.3 °C / 94.5 – 99.1 °F
– Oral: 35.5 – 37.5 °C / 95.9 – 99.5 °F
– Rectal: 36.6 – 38.0 °C / 97.9 – 100.4 °F
– Microlife NC 400: 35.4 – 37.4 °C / 95.7 – 99.3 °F

8. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahrenheit or Celsius. To switch the display between °C and °F, press and hold the MODE button 6 for 3 seconds; the beeper icon is shown on the display. Press the MODE button again; the current measurement scale («°C» or «°F» icon) will be shown on the display AO. Change the measurement scale between °C and °F by pressing the MEMO button 5. When the measurement scale has been chosen, press the START/IO button 7 to enter the «ready for measuring» mode; otherwise, the device automatically switches to ready for measuring after 10 seconds AT.
9. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings with a record of both time and date.

Recall mode AP: Press the MEMO button 5 to enter recall mode when the power is off. The memory icon
«M» will flash.
Reading 1 – the last reading AQ: Press and release the MEMO-button 5 to recall the last reading. Number 1» and a flashing «M» are displayed.

Pressing and releasing the MEMO button 5 after the last 30 readings have been recalled will resume the above
sequence from reading 1.

10. Error Messages

Measured temperature too high AR: Displays «H» when the measured temperature is higher than 43.0 °C / 09.4 °F in body mode or 99.9 °C / 211.8 °F in object mode.
Measured temperature too low AS: Displays «L» when the measured temperature is lower than 34.0 °C / 93.2 °F in body mode or 0.1 °C / 32.2 °F in object mode.
Ambient temperature too high BT: Displays «AH» when the ambient temperature is higher than 40.0 °C / 104.0 °F.
Ambient temperature too low BK: Displays «AL» when the ambient temperature is lower than 5.0 °C / 41.0 °F in object mode.
Error function display BL: – «Er 0» / «Er 6»: The system has a malfunction.
Blank display BM: Check if the batteries have been inserted correctly. Also, check the polarity (<+> and <->) of the batteries
Flat battery indicator BN: If only the «battery» icon is shown on the display, the batteries should be replaced immediately.

11. Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring sensor. Ensure that no liquid enters the interior of the device. Never use abrasive cleaning agents, thinners, or benzene for cleaning, and never immerse the device in water or other cleaning liquids. Take care not to scratch the surface of the sensor lens and the display.

12. Battery Replacement

This device is supplied with 2 new, long-life 1.5V, size AAA batteries. Batteries need replacing when this icon
«battery» BN is the only symbol shown on the display. Open the battery cap BQ with a tool and lift it manually. Replace the batteries – ensure correct polarity as shown by the symbols in the compartment.
****Batteries and electronic devices must be disposed of in accordance with the locally applicable regulations, not with domestic waste

13. Guarantee

This device is covered by a 5-year guarantee from the date of purchase. During this guarantee period, at our discretion, Microlife will repair or replace the defective product free of charge. Opening or altering the device invalidates the guarantee. The following items are excluded from the guarantee:

Transport costs and risks of transport.
Damage caused by incorrect application or non-compliance with the instructions for use.
Damage caused by leaking batteries.
Damage caused by accident or misuse.
Packaging/storage material and instructions for use.
Regular checks and maintenance (calibration).
Accessories and wearing parts: Batteries, Probe cover (optional).

Should guarantee service to be required, please contact the dealer from where the product was purchased or our local Microlife service. You may contact your local Microlife service through our website: www.microlife.com/support
Compensation is limited to the value of the product. The guarantee will be granted if the complete product is returned with the original invoice. Repair or replacement within the guarantee does not prolong or renew the guarantee period. The legal claims and rights of consumers are not limited by this guarantee.

14.Technical Specifications

Type: Non Contact Thermometer NC 400
Measurement range : Body mode: 34.0 – 43 °C / 93.2 – 109.4 °F
Object mode : 0.1 – 99.9 °C / 32.2 – 211.8 °F
Re s olution: 0.1 °C / °F
Measurement accuracy (Laboratory): Body mode: ±0.2 °C, 35.0  42.0 °C / ±0.4 °F, 95.0  107.6 °F ±0.3 °C, 34.0  34.9 °C and 42.1 43.0 °C / ±0.5 °F, 93.2 94.8 °F and 107.8 109.4 °F Object mode:
±1.0 °C, 0.1 99.9 °C / ±2 °F, 32.2  211.8 °F

Display: Liquid Crystal Display, 4 digits plus special icons
Acoustic: The unit is turned ON and ready for the measurement: 1 short beep. Complete the measurement: 1 long beep (1 sec.) if the reading is less than 37.5 °C / 99.5 °F, 10 short «beep» sounds if the reading is equal to r greater than 37.5 °C / 99.5 °F. System error or malfunction: 3 short «bi» sounds.
Memory: 30 readings recall in the memory mode with a record of both time and date.

Backlight: The display light will be GREEN for 1 second when the unit is turned ON. The display light will be REEN for 5 seconds when a measurement is completed with a reading less than 37.5 °C / 99.5 °F. The display light will be RED for 5 seconds when a measurement is completed with a reading equal to or higher than 37.5 °C / 99.5 °F.
Operating conditions : Body mode: 10 – 40.0 °C / 50 – 104.0 °F Object mode: 5 – 40.0 °C / 41 – 104.0 °F 15 – 5 % relative maximum humidity .
Storage conditions: -25 – +55 °C / -13 – +131 °F 15 – 95 % relative maximum humidity Automatic
Switch-off: Approx. 1 minute after the last measurement has been taken.
Battery: 2 x 1.5 V alkaline batteries; size AAA
Battery lifetime: approx. 2000 measurements (using new batteries)
Di m ensions: 167 x 46.6 x 44 mm
Weight: 103.5 g (with batteries), 81 g (w/o batteries)
IP Class: IP22
Reference to standards ASTM E1965; IEC 60601-1; IEC 60601-1-2 (EMC); IEC 60601-1-11
Expected service life: 5 years or 12000 measurements
This device complies with the requirements of the Medical Device Directive 93/42/EEC.
Technical alterations reserved.
According to the Medical Product User Act, a biennial technical inspection is recommended for professional users. Please observe the applicable disposal regulations.
15.www.microlife.com
Detailed user information about our thermometers and blood pressure monitors as well as services can be found at www.microlife.com.