POSITIVE VIBRATION EM-JH141-SB XL Wireless Headphones User Guide

June 5, 2024
POSITIVE VIBRATION

POSITIVE VIBRATION EM-JH141-SB XL Wireless Headphones

POSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
PRODUCT

INSIDE THE BOX

POSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-1

LEGENDPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-2

A. Headphones
B. Charging Cable
USB-C to USB-A
C. Aux Cable With Microphoneand 1-Button Remote
D. Stash Bag
E. Warranty Information
F. Quick Start Guide
G. Welcome Cards
H. Sticker

COMPONENTS

POSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-3

LEGEND

A. Play/Pause + Make/End Phone Calls
B. Volume Up/Track Forward
C. Volume Down/Track Backward
D. Earcups
E. Headband Adjustment
F. 3.5mm Line In Port
G. USB-C Charging Port

STATUS

Low Power
Charging
Pairing Mode
Bluetooth® Not Connected Bluetooth® Connected Phone Call

LED INDICATION

Blinking
On
Fast Blinking
Fast Blinking
Slow Flash
Slow Flash

POWER ON/OFF

POSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-5
POWER ON/OFFPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-6
PAIR NEW DEVICEPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-7
CLEAR PAIRINGPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-8
MUSIC CONTROLPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-9
MAKE/END PHONE CALLSPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-10
ACTIVATE VOICE ASSISTANTPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-
Headphones-FIG-11

STEREO LINE IN JACKPOSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-12

CHARGING

POSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-Headphones-
FIG-13

STATUS

Low Power
Charging
Pairing Mode
Bluetooth® Not Connected Bluetooth® Connected Phone Call

LED INDICATION

Blinking
On
Fast Blinking
Fast Blinking
Slow Flash
Slow Flash

CABLE FUNCTIONALITY

POSITIVE-VIBRATION-EM-JH141-SB-XL-Wireless-
Headphones-FIG-14

LEGEND

Answer Call
End Call
Reject call
Play/Pause
Forward Track
Backward Track
Voice Siri/Google

ACTION

x1
x1
0:02s
x1
x2
x3
0:03s

COMPLIANCE INFO

POSITIVE VIBRATION XL

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’ Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The device complies with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.
Les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérirles informations correspondantes. Utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe b est conforme à la norme nmb – 003 du canada.
ISEDC RF EXPOSURE STATEMENT:
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals