arlo VML2030-1VZNAS Go 2 LTE/WiFi Security Camera User Manual
- June 6, 2024
- Arlo
Table of Contents
arlo VML2030-1VZNAS Go 2 LTE/WiFi Security Camera User Manual
PACKAGE CONTENT
-
Go 2 LTE/WiFi Security Camera
-
Screw Mount
-
Screw Kit
-
Rechargeable Battery
-
Indoor charging cable
Note: To access the mobile broadband network, your Go 2 Camera requires an activated SIM card.
Installation
-
Press the release button and separate the camera from the camera housing
-
Insert the battery.
-
For LTE access, verify that the SIM card is installed and activated.
-
Insert the camera back into the housing
Set up your Go 2 Camera
- Download the Arlo app and follow the setup instructions for your camera.
- We recommend charging the battery indoors before mounting your camera.
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. Any other trademarks are for reference purposes.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
Arlo Technologies Intl. Ltd Ground Floor, Building 3 University Technology Centre Curraheen Road, Cork T12 EF21 Ireland