makita HR005GM201 40V Max Brushless SDS Max 40mm Rotary Hammer User Guide
- June 6, 2024
- Makita
Table of Contents
makita HR005GM201 40V Max Brushless SDS Max 40mm Rotary Hammer
Product Statement
40V Max Brushless SDS Max 40mm Rotary Hammer
The 40V Max XGT Brushless 40mm Rotary Hammer (HR005G) is a cordless
concrete solution designed for heavy-load applications. It delivers the power,
speed, and run-time for corded demands, without the cord. The HR005G features
Active Feedback-Sensing Technology (AFT), which electronically turns off the
motor if rotation of bit is suddenly forced to stop, and Anti-Vibration
Technology (AVT) for reduced vibration with an internal counterbalance to
actively reduce vibration.
For added durability in harsh jobsite conditions the HR005G features Extreme
Protection Technology (XPT) engineered for improved dust and water resistance.
Also featuring constant speed control that automatically applies additional
power under load to complete the most demanding jobs.
Product Overview
Product Specifications
Max. drilling capacities in masonry
| TCT Bit: 40mm Core Bit: 105mm
---|---
Chuck Type| SDS Max
Impact energy| 8.0j
No load speed| 250-500rpm
Impact rate| 1,450-2,900ipm
Sound Pressure| 91dB(A)
Vibration| 5.0m/s²
Overall length| 520mm
Skin weight| 6.9kg
Weight (with battery)| 8.2kg (BL4050F)
Voltage| 40V Max
- Anti-Vibration Technology (AVT) – extremely low vibration is achieved by 4 active vibration absorbing mechanisms. A counterweight, vibration absorbing rear handle, anti-vibration side grip and rubber joint construction.
- Soft No Load – motor speed reduces to idle when there is no load placed on the bit, in order to preserve battery and allow the user to accurately land the bit on the material.
- Constant Speed Control – motor speed and chipping efficiency is maintained under load. Motor speed stays constant even under load.
- Twin LED Job light – with pre-glow and after-glow functions illuminating the work area for greater convenience.
- Dual Mode Operation – with both rotation and hammering for drilling in masonry and hammering only for chipping applications.
- Active Feedback Sensors (AFT) – active feedback sensors shut down the tool in the event of a kickback, providing the user with increased safety during operation.
- Variable Speed Trigger & Dial – impacting power can be adjusted by switch trigger and speed dial according to specific application requirements.
- *Auto-Start Wireless System (AWS) –** compatible with AWS the rotary hammer can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
- eXtreme Protection Technology (XPT) – is an advanced series of seals and channels to direct dust and moisture away from critical components ensuring the durability of the product in the toughest conditions.
Advantages
Active Feedback sensing Technology – AFT
The HR005G features AFT, Active feedback sensing Technology.
Active Feedback sensors shut down the tool as soon as a sudden slowing of
rotation is detected during operation, providing increased safety to the user
during operation of the tool.
Anti-Vibration Technology
Our Range
Max. drilling capacities in masonry TCT Bit: 40mm Core Bit: 105mm TCT Bit: 52mm Core Bit: 160mm
| Chuck Type | SDS Max | SDS Max |
|---|---|---|
| Impact energy | 8.0j | 21.4j |
| No load speed | 250-500rpm | 150-310rpm |
| Impact rate | 1,450-2,900ipm | 1,100-2,250ipm |
| Sound Pressure | 91dB(A) | 99dB(A) |
| Vibration | 5.0m/s² | 8.5m/s² |
| Overall length | 520mm | 610mm |
| Skin weight | 6.9kg | 11.7kg |
| Weight (with battery) | 8.2kg (BL4050F) | 14.3kg (BL4050F) |
| Voltage | 40V Max | 80V Max (40V x2) |
Accessories
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>