hama 200102 USB Multiport Instruction Manual
- June 6, 2024
- Hama
Table of Contents
00 200102
USB Multiport
Operating Instructions
Package Contents
- USB-C Multiport
- These operating instructions
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children! Use the product for its intended purpose only.
- Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
- The product is intended for indoor use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning
- Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
- Common values are500 mA for USB-A2.0, 900 mA for USB-A3.0, and up to 3000 mA for USB-C.
- Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Note
- To be able to use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
- To be able to use the VGA &HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt-3/4.
- VGA &HDMI™: for simultaneous use of two monitors displaying the same contents (Full HD /1080p).
- For optimized video function, we recommend passive monitor adapters /cables (without chipset /signal converter).
Startup and Operation
- Switch on your computer and boot the system.
- Connect the product to a free USB port on your computer.
- You do not have to install drivers; the computer will automatically recognize the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.
**** Technical Data
| Operating voltage /current consumption | 5–20V max. 3A |
|---|---|
| Compatibility | USB-C port |
| System requirements | Windows 11 /10/8/7 Mac OS 10.8 ≥ |
| USB specification | USB 3.2 Gen1 |
Note
- If the reisinterference or the product no longer responds, unplug the product, wait afew seconds and then plug it in again.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted, and subject to technical changes. Our general terms of
delivery and payment are applied.
00118654/08.21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>