hama 179843 Active DVB-T2 Indoor Antenna Instruction Manual
- June 6, 2024
- Hama
Table of Contents
- Operating instruction
- Explanation of Warning Symbols and Notes
- Package Contents
- Safety Notes
- Specifications
- Getting started and operation
- Care and Maintenance
- Warranty Disclaimer
- Service and Support
- Recycling Information
- Declaration of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
00
179843
Aktive DVB-T2 Zimmerantenne
Active DVB-T2 Indoor Antenna
Operating Instructions
Operating instruction
Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for futurereference. If you
sell the device, please pass these operating instructions on to the new owner.
Controls and Displays
- Micro-USB input
- Antenna cable
- Operating LED
- On/off switch
- Fastening screw for base /wall bracket
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- DVB-indoor Antenna
- USB cable
- Base /wall bracket
- These operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- The product is intended for indoor use only.
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture, and overheating and use it in dry rooms only.
- Children should be supervised to ensurethat they do not play with the device.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Connect the product only to a socket that has been approved for the device. The electrical socket must always be easily accessible.
- Disconnect the product from the network using the power button –if this is not available, unplug the power cord from the socket.
- Lay all cables so that they do not pose a tripping hazard.
- Do not bend or crush the cable.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not modify the device in any way. Doing so voids the warranty.
Warning
- Do not use the product if the AC adapter, adapter cable, or power cable is damaged.
- Do not attempt to service or repair the device yourself. Leave any service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
Specifications
Rated power consumption | max. 25 mA |
---|---|
Supply voltage antenna | 5V |
Power supply | 5V 25 mA via USB |
Frequency band(s) | UHF: 470 –790 MHz |
VHF: 174 –230 MHz
Active antenna gain| UHF: 6–15dBi
VHF: 5–14dBi
Connection| coax plug
Ambient temperature| -20 to +40° C
Getting started and operation
Powering the antenna using the antenna cable (Fig. 2a)
- Connect the coaxial cable of the antenna to the antenna input on the digital TV or set-top box.
- Switch the antenna on using the on/off switch (4). The LED (3) lights up.
- Switch on the digital TV (and the set-top box, if present).
Note
Powering the antenna directly from the set-top box or digital TV requires a
supply voltage of 5V.
Note that the voltage of +5 V is provided by the set-top box and/or digital
TV. Make any necessary settings in the menu.
Powering the antenna directly using the USB port of the digital TV /set-top box (Fig. 2b)
- Connect the coaxial cable of the antenna to the digital TV or set-top box.
- Connect the USB cable to an unused USB port on your TV or set-top box.
- Switch the antenna on using the on/off switch (4). The LED (3) lights up.
- Ensurethat the set-top box or digital TV is switched on.
Powering the antenna using an external power supply unit (Fig. 2c)
- Connect the coaxial cable of the antenna to the antenna input on the digital TV or set-top box.
- Connect the USB cable to the antenna and to a suitable USB power supply unit (not included) and plug the latter into a socket.
- Switch the antenna on using the on/off switch (4). The LED (3) lights up.
- Switch on the digital TV (and the set-top box, if present).
Standing the antenna (Pic 3a) /wall mounting (Pic 3b)
The antenna can be stood vertically or horizontally thanks to a base that can
be flexibly fixed in place, or it can be mounted to a wall. Release the
fastening screw (5) and secure the base with the screw in accordance with how
you would like to stand the antenna. Forwall mounting, please use suitable
screws and wall anchors (not included in the delivery package) to attach the
bracket (base) to the wall.
Note –Wall mounting
- Before mounting, check that the wall you have chosen is suitable for the weight to be mounted Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
- After the product has been mounted, check that it is sufficiently secure. You should repeat this check at regular intervals.
TV reception
Note
Please note that the number and quality of stations received may vary
depending on the position of the antenna and local conditions.
Radio reception:
- The antenna can also be used for DABreception.
- As most audio devices have an F-plug connection, please use a coax socket-F socket adapter (not included).
Note
Please note that the number and quality of stations received may vary
depending on the position of the antenna and local conditions.
Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU
in the national legal system, the following applies: Electric and electronic
devices, as well as batteries, must not be disposed of with household waste.
Consumers are obliged by law to return electrical and electronic devices as
well as batteries at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are defined
by the national law of the respective country. This symbol on the product, the
instruction manual, or the package indicates that a product is subject to
these regulations. By recycling, reusing the materials or other forms of
utilizing old devices/batteries, you aremaking an important contribution to
protecting our environment.
Declaration of Conformity
Hereby, Hama GmbH &CoKGdeclares that the radio equipment type [00179843] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00179843 -> Downloads.
Hama GmbH &CoKG
86652 Monheim /Germany
www.hama.com
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted, and subject to technical changes. Our general terms of
delivery and payment are applied.
00179843/09.21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>