hama 139916 X-Pointer 6in1 Wireless Laser Presenter Instruction Manual

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0

www.hama.com/nep

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Wireless Laser Presenter X-Pointer 6in1

V2 00
139916

1

3

| Laser Point activation
Air Mouse activation/Press to black display
---|---
| Page Up
Page Down
| Full-screen playback
Digital Ink /Print function
Remove black track /mark track
| Left (PC) mouse button
Right (PC) mouse button
ON/OFF by long Press
| Volume +
Volume –

Operating instruction

Thank you for choosing the Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
**Note**
This symbol is used to indicate additional information or important notes.

Package Contents

• X-Pointer 6in1’ laser presenter
• 2AAA batteries
• Set with warning labels
• These operating instructions

Safety Notes

• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not continue to operate the device if it becomes visibly damaged.
• Children are not permitted to play with the device.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.

Warning –Batteries

• When inserting batteries, note the correct polarity (+ and -markings) and insert the batteries accordingly. Failuretodosocould result in the batteries leaking or exploding.

• Only use batteries (or rechargeable batteries) that match the specified type.

• Always choose the battery size and grade that best suits the intended purpose. Keep these operating instructions in asafe place for future reference, as they provide information about choosing the right battery.

• Replace all the batteries in aset at the same time.

• Do not short-circuit batteries.

• Do not charge batteries.

• Do not throw batteries in a fire.

•  Keep batteries out of the reach of children.  Do not allow children to change batteries without supervision.

• Remove the batteries from products that aren’t being used for an extended period.

• Immediately remove and dispose of dead batteries from the product.

•  Before you insert the batteries, clean the battery contacts and the polar contacts.
  Warning –Laser

•  Do not look directly at the laser beam! Close your eyes and turn your head away if your eyes meet the laser beam.

• Do not shine light at persons using binoculars or telescopes!

• Do not look directly at the laser beam! Do not look directly at the laser beam using optical instruments!

• This product contains a class 1laser in accordance with EN60825-1:2014.

Operation

Inserting the battery (Fig. 1)

• Use only AAA batteries (alkaline /zinc-carbon).
• To insert or change the battery/batteries, insert the AAA battery/batteries with the correct polarity into the battery compartment. Operation
  • Insert the USB receiver into an unused USB port on your PC (Fig. 2).
  • Press the laser button to activate the built-in laser.

Controls (Fig. 3)

‘Air mouse’ mode
• Press the function button to start/exit the mode.
• Now control the and R mouse pointer by moving the presenter.
• In this mode, the and function buttons correspond to the commands of the left and right mouse buttons.

Care and Maintenance