hama 210509 Smartphone Holder MagLock with Suction Cup Instruction Manual
- June 6, 2024
- Hama
Table of Contents
00 210509
Smartphone Holder MagLock with Suction Cup
Smartphone-Halter MagLock Saugnapf
Operating Instructions
|
---|---
Thank you for choosing aHama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- Magnetic holder
- These operating instructions
Safety instructions
- Use the product only for the intended purpose.
- This product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture, and overheating and use it in dry environments only.
- When using this product, observe the applicable local traffic laws and regulations.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
Warning -magnets
- People with pacemakers should keep away from magnets. The magnets can negatively affect the function of the pacemaker.
- Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.
Warning
- Take care that components such as airbags, safety areas, controls, instruments, etc., and visibility is not blocked or restricted.
- Ensure that the product is securely mounted before every journey.
- While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
Installation
Note
- Before installing the holder, check the installation options in your vehicle. If in doubt, check the vehicle’s instruction manual or contact the vehicle manufacturer.
- Never apply force when using the product or during installation.
Suction cup holder
- Remove the protective film from the suction cup.
- Open the locking lever on the suction cup (A).
- Position the holder with the suction cup on a clean, even surface. (e.g. pane of glass)
- Lightly press the holder onto the required installation surface and close the locking lever to secure the holder in place.
- After installation, always check that the suction cup is secure.
- To release the suction cup from the installation surface again, open the locking lever.If necessary, pull gently on the tab to completely release the suction cup.
Adjusting the angle and tilt
The smartphone holder can be steplessly adjusted in terms of angle and tilt with respect to the observer using a ball head.
- Always adjust the angle and tilt without the device being inserted.
- To adjust, loosen the clamp screw on the ball head.
- Adjust the angle and tilt as required and tighten the clamp screw.
Inserting /removing the device
Note
- Continually check that the smartphone holder is securely seated and the device is securely held.
- Please only use this smartphone holder for your windscreen.
- When you place the back of your Apple smartphone on the in-car holder, it attaches automatically thanks to the integrated magnets. (B)
Note -devices
Please note that this product is only suitable for Apple smartphones of the
latest generation (12).
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted, and subject to technical changes. Our general terms of
delivery and payment are applied.
00210509/03.21