KICKER KXMA800.8 Amplifier Owner’s Manual
- June 6, 2024
- KICKER
Table of Contents
KXMA800.8 AMPLIFIER
Info Card
Mounting
Choose a dry, structurally sound location to mount your KICKER amplifier. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifier. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifier. Don’t drill through the bottom of the boat!
Wiring
See the owner’s manual for information on how to use amplifier features such as
gain, crossover, bass boost, and more!
| Model | External Fuse (sold separately) | Power/ Ground Wire | KICKER Wiring Kit |
|---|---|---|---|
| KXMA800.8 | 1 x 125 Ampere | 4 Gauge | KMPK4, PK4, CK4 |
Thank you and congratulations on your purchase of the KICKER KXMA Amplifier! The KXMA-series have been engineered to handle the punishing conditions of outdoor and marine audio applications, with UV-treated aluminum chassis, conformal coated PCBs, thick gasket to seal and protect sensitive electronics, and terminals that meet rigorous ABYC/NMMA standards. Combined with KICKER’s audiophile-grade components, DSP features, and signature power, your party on the water or the patio will be as memorable as the music. Incorporate the whole family of KICKER Marine products to maximize your aquatic audio experience!
Sincerely
Steve Irby
President/CEO
Scan here for owner’s manual
https://www.kicker.com/app/manuals/48KXMA8.pdf
IMPORTANT: KICKER recommends a professional installation performed by licensed providers. You are solely responsible for safely mounting and wiring your products. Remember to cap unused wires and avoid electrical shorts!