TRACTOR SUPPLY HS1001 Hitch Stabilizer Instruction Manual
- June 6, 2024
- Tractor Supply
Table of Contents
HITCH STABILIZER
MODEL: HS1001
READ ALL INSTRUCTIONS BEFORE USING THE HITCH STABILIZER
NOTE: Failure to read instructions before use could result in injury or
death.
Instructions for Installation and Use:
CONTENTS: SEE FIG. 1
- STABILIZER BODY
- 3/8” KNOB SCREWS
STEP 1– SEE FIG. 2
INSTALL TWO 3/8” KNOB SCREWS INTO THE STABILIZER BODY.
STEP 2 – SEE FIG. 3
SLIDE STABILIZER OVER MALE RECEIVER BAR.
NOTE MAKE SURE STABILIZER IS ORIENTED WITH ONE OF THE SECURING TABS
IN THE DOWN (TOWARD GROUND) POSITION.
STEP 3– SEE FIG. 3 & 4
SLIDE ATTACHMENT INTO VEHICLES FEMALE RECEIVER AND SECURE USING THE HITCH AND
KEEPER PIN. (NOT INCLUDED)
STEP 4 – SEE FIG. 5
SLIDE STABILIZER FORWARD ON MALE RECEIVER BAR UNTIL IT IS TOUCHING THE
VEHICLES FEMALE RECEIVER.
STEP 5 – SEE FIG. 6 & 7
TIGHTEN THE TWO 3/8” KNOB SCREWS SECURELY. THIS WILL HELP STABILIZE
ATTACHMENT.
For more information about this or other products, contact us at:
Great Day, Inc.
604 Kimbrough Dr.
Tallulah, LA 71282
866-649-1918
www.greatdayinc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>