Govee H617F RGBIC LED Strip Light User Manual

June 4, 2024
Govee

Govee - logo

User Manual
Model: H617F
Govee RGBIC LED Strip Light

Safety Instructions

Read and follow all the safety instructions:

  • The product is not water-resistant, be cautious when installing and using.
  • Use the product with the provided power adapter only.
  • Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
  • When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s life span.
  • Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
  • Do not install the strip light near any heat sources.
  • Do not allow children to install the strip light alone.
  • Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
  • Unroll the strip lights before powering them on.

Introduction

Thanks for choosing Govee RGBIC LED Strip Lights. This product is composed of 2 rolls of 15-meter-long strip lights, which is embedded with Govee’s cutting- edge RGBIC technology so that each segment can be adjusted independently, creating vibrant rainbow effects.

What You Get

LED Strip Lights 2
Adapter 1
User Manual 1
Service Card 1

At a Glance

Installing Your Device

Before You Install

  1. Unpack the box and check all items included.
  2. Power on the strip light and check whether it lights up.

Installing Steps

  1. Wipe the surface to make sure it’s clean and dry.
  2. Peel off the protective film on the tape, stick the strip on, and press over it firmly.
  3. Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effect.
  4. Power on the strip lights and start using.

Pairing Your Device with the Govee Home App

Pairing Instructions

  1. Download the Gove Home app from the App Store (iOS devices) or Google Play (Android devices).
  2. Turn on Bluetooth on your smartphone.
  3. Open the app, tap the “+” icon in the top right corner and search for “H617F”.
  4. Tap the device icon and follow the on-screen instructions to complete the pairing.

https://www.govee.com/apps/qrcode

For FAQs and more information, please visit. www.govee.com

Specifications

Length 2x15m/49.2ft(connected rolls)
Light Color RGBIC
Water Resistance NO
Control Method App, Control Box
Power Supply Adapter 24V

Troubleshooting

  1. The adhesive tape is not strong enough.
    • Make sure the installation surface is clean and dry.
    • Firmly press over the strip after sticking.
    •  Reinforce the installation via more clips and tape.

  2. Cannot connect to Bluetooth.
    • Do not skip the Bluetooth connection in the app.
    • Ensure Bluetooth on your smartphone has been turned on.
    • Your smartphone may be incompatible with the Gove Home app. Try using a different smartphone then reconnect.
    • Power the strip lights and your smartphone Bluetooth off then on, then try again.
    • Ensure that your smartphone is within 1m/3.28ft of the strip lights when connecting.
    • Clear any obstructions that are between the strip lights and your smartphone.

  3. The strip lights do not display the full selected color/Some LED beads do not light up.
    • Please contact the Gove support team for rapid product replacement.

  4. Cannot sync the strip lights to the beat of my music.
    • Move the control box closer to the music source.
    • Clean the mic on the control box then try again.

Customer Service

 Warranty: 12-Month Limited Warranty
 Support: Lifetime Technical Support
 Email: [email protected]
 Official Website: www.govee.com
@Govee   @govee_official  @govee.official
 @Goveeofficial   @Govee.smarthome

FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry
Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-005.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced.
Not intended for illumination. Only used for creating ambiance.

  1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
  2. Do not use the rope light when covered or recessed into a surface;
  3. Do not open or cut the rope light ;

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: [email protected]
Contact information: https://www.govee.com/support

Gove is a trademark of Shenzhen Intellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co., Ltd. All Rights Reserved.

 FOR INDOOR USE ONLY
POUR UNE UTILISATION EN INTERIEUR UNIQUEMENT

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Govee User Manuals

Related Manuals