Govee H6072 Lyra RGBICWW Corner Floor Lamp User Manual

User Manual

Model: H6072
Govee RGBICWW Floor Lamp

Read and follow all the safety instructions:

• The lamp is not waterproof. Avoid exposing it to splashing or dripping water.
• The operating temperature should be within -10° to 40°C (14° to 104°F).
• The lamp’s internal light source cannot be replaced. If it breaks, you must replace the lamp.
• Do not allow children to install the lamp alone.
• Avoid placing the lamp near heat sources.
• Do not install the lamp with a dimming driver.
• Avoid placing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thanks for choosing the Govee Lyra Floor Lamp. With a simple and slender design, it can easily fit with your home decor. Let your life shine with colorful light effects, a dynamic Music mode, and a host of other incredible features, all providing you with an astonishing lighting experience!

What You Get

At a Glance

Installing Your Device

1. Connect the adapter to the control box with the DC charging port.
2. Power on the adapter.

Pairing Your Device with the Govee Home App

What You Need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

1. Download the Gove Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Open the app, tap the “+” icon in the top right corner and search for “H6072”.
3. Tap the device icon and follow the onscreen instructions to complete the pairing.

Specifications

Troubleshooting

1. Cannot connect to the Govee Home app.
   • Check if the lamp is powered on.
   • Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
   • When connecting for the first time, ensure the smartphone is near the lamp.
   • If the connection error still exists, please delete the connected lamp from “My Device” on the app. Reconnect to the Govee Home app by following the instructions provided previously.

2. Wi-Fi disconnected or failed to connect.
   • Check if the lamp is powered on.
   • Do not skip the Wi-Fi connection steps during the lamp pairing process.
   • Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
   • Ensure you entered the correct Wi-Fi password during the Wi-Fi setup process.
   • Try connecting the lamp with a smartphone hotspot to check if your home network is working properly.
   • Shorten the distance between the lamp and the Wi-Fi router to less than 1 m, then reconnect.

3. Cannot connect to Alexa or Google Assistant.
   • Ensure the Wi-Fi connection is stable and working properly.
   • Go to “User Guide” on the app Settings page to pair the lamp again.

4. Can multiple users control one lamp?
   • Each lamp can only be controlled by one account.
   •If multiple users want to manage the same lamp, ensure they all use the same account.

Customer Service

 Warranty: 12-Month Limited Warranty
 Support: Lifetime Technical Support
 Email: support@govee.com
 Official Website: www.govee.com

 @Govee  @govee_officia   @govee.official   @Goveeofficial   @Govee.smarthome

https://www.govee.com/apps/qrcode

For FAQs and more information, please visit. www.govee.com

FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/IV technician for help.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Non-replaceable light source.
Not intended for illumination. Only used for creating ambiance.

Gove is a trademark of Shenzhen Intellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co.,Ltd. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>