CAMBRIDGE AUDIO Melomania Touch True Wireless Headphones User Guide
- June 6, 2024
- Cambridge Audio
Table of Contents
QUICK START
GUIDE
THANK YOU!
Dear Fellow Music Lover,
Thank you for purchasing our Melomania Touch earphones. We’re excited that you
are one of the first to own them.
We’ve become aware of a few things that should have been explained more
clearly in the guide provided inside the box, so we provide this updated
version to guide you through the correct process more smoothly, step by step.
The pairing process is quite critical in order to connect your earphones with
your device and app fully, passing a data stream as well as music.
To improve your product as time goes on, we will make regular firmware
updates, so please check the Melomania App and update your firmware to enjoy
these ongoing enhancements and bug fixes (switch on notifications to be
alerted).
Kind regards,
– The Cambridge Audio Melomania Team
STATUS LED
- Fast white flashing: Powered on
- Flashing blue and white: Waiting to pair
- Slow white flashing: Connected and waiting for the signal
- No light: Connected or powered off
- Slow red flashing: Charging in case
NEED MORE HELP?
If you encounter any hiccups, please place the earbuds back in the case for a
few seconds, then take them back out. This allows them to reset their
connection (just be patient for a few seconds while they reconnect fully).
When you use the app, it may take a few seconds to connect fully, so if you
feel the need to press the “Try Again” button on the app it may help to wait a
few seconds.
In the app is a “Feedback” button. Please do tell us what you think! Our team
reads all comments and is committed to your satisfaction.
Download the Melomania App for firmware updates.
For more setup instructions and videos, visit:
melosupport.cambridgeaudio.com
1. DOWNLOAD THE MELOMANIA APP
For optimal performance and additional help, please download the Melomania app
on the App Store or Google Play Store.
If you already have the app downloaded, please make sure it is updated to the
latest version.
http://cambridgeaudio.com/melo-android-app
http://cambridgeaudio.com/melo-ios-app
2. CHARGE YOUR EARPHONES & CASE
Before using your Melomania earphones for the first time, please place them in
the case and plug them into a USB power socket for at least 30 minutes to
allow them to charge.
3. POWER ON
Remove both earphones from the case. Both earbuds should power on
automatically. One earphone may start flashing blue and white, indicating that
it is ready to pair.
If not, manually power on each earphone by pressing and holding on to the
surface until you hear “Power On” and the LEDs flash white.
4. ENABLE BLUETOOTH PAIRING ON YOUR EARPHONES
The LED on one earphone will flash blue and white when waiting to pair, which
will happen automatically on some product releases.
If one earphone is not flashing blue and white, press and hold the surface of
one earphone for 8 seconds until you hear “Waiting to Pair”.
5. ENABLE BLUETOOTH ON YOUR DEVICE
6. SELECT EARPHONE IN SETTINGS
You should see Melomania Touch L (or R) listed. Select this.
7. WAIT FOR POP-UP NOTIFICATION AND PAIR
Wait for the “Bluetooth Pairing Request” pop-up notification to appear and
press “Pair”.
When pairing is successful, one earphone will be labeled “connected”, and the
other will be labeled “not connected”.
Some devices may call the secondary earphone “Headset”.
On some devices a third connection may be listed, this is perfectly normal.
Don’t disconnect or remove it.
You may now return to the Melomania App to customize your listening experience.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>