FIAMMA FRA206299 Kit Turbo-Vent 28 F Instruction Manual

Kit Turbo-Vent 28 F
Installation and usage instructions

KIT TURBO-VENT 28 F
07903-01-

COMFORT- Tech

E24 1OR05/01051 802

| |
---|---|---
KIT TURBO-VENT 28 F| 07903-01-| 0,5 kg

Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use, or! imitations of the product, contact the dealer. We recommend that the installation be carried out by qualified personnel and in compliance with current local regulations.

Nominal supply voltage

Tension tolerance
Min. feeding tension
Maximum supply voltage.
Power of nominal supply voltage
Wire section
Max. electric input
Operating temperature
Storage temperature
Permanent airflow

Do not forget to arrange the electrical connection directly from the battery (only 12V – NOT 220V). Connect the input cables of the electric motor.
Position the switch to “0” before connecting the power supply wires. Connect the motor wires to the reversing switch, then connect the 12 V power supply wires.

In case of problems please contact your local dealer.

Fiamma declines all responsibility for any personal injury and damage to property due to incorrect assembly or use of the product; it is suggested to keep the instructions inside the vehicle. The assembly of the product must be carried out according to the assembly instructions: the product must not be modified in any way. Periodically check the tightness of all the screws in the accessory, especially after the first kms from the installation and each time before and after long journeys. Before starting the vehicle, check that the rooflight is properly closed. Periodically check that the cover is intact. Don’t open the rooflight when the vehicle is traveling. Don’t open the rooflight in case of strong wind or rain. Remove snow or ice from the rooflight. The maximum permitted speed of the vehicle with a mounted rooflight is 130Km/h. Always comply with speed limits and the Highway Code. The speed should always be suitable to traffic conditions and towed load.

CARE AND MAINTENANCE:

For the internal and external cleaning of the roof ight, always use only neutral, non-aggressive detergents. For cleaning the Crystal cover use an acrylic glass cleaner with a soft cloth so as not to scratch the surface. Never use aggressive products such as glass cleaners, all-purpose cleaners, abrasives, or dish-washing detergents. Also, never use alcohol-containing detergents, solvents, or any corrosive liquid. The mosquito net can be cleaned with water and a neutral detergent by removing it from the press fittings.

Warranty Ramma

In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

EU Declaration of Conformity (DoC)

We,

Company name:| Fiamma S.p.A.
Postal address:| Via San Rocco, 56
Postcode and city:| Cardano al Campo — (Varese)
Telephone number:| 0311/709111
E-mail address:| [email protected]
Declare that the DoC is issued under our sole responsibility and belongs to the following product:

07501B01

| Kit Turbo Vent F P3

y = – White; B Crystal

The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

• 2014/30/EU Electro Magnetic Compatibility Directive (EMCD).
• 2014/35/EU Low Voltage Directive (LVD).
• 2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive).
• ECE/ONU/R10 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility — R10.
• ECE/ONU/R43 Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles — R43 (only for Turbo 28, 28 F, Vent, Vent P3, and Vent Premium).
• EN 55014-1:2006 + A1:2009+ A2:2011 — RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
• EN 61000-3-2:2014 — RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
• EN 61000-3-3:2013 — RCM (only for Turbo 28, 28 F and Turbo Vent Premium).
• EN 55014-2:2015 — RCM (only for Turbo 28, 28 F, and Turbo Vent Premium).

The following harmonized standards and/or technical specifications have been applied

https://www.fiamma.it/en/

fiamma.com

Fiamma S.p.A. – Italy
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time,
without notice, prices, materials,
specifications, and models or to cease
production of any model.

COMFORT- Tech

Documents / Resources

| FIAMMA FRA206299 Kit Turbo-Vent 28 F [pdf] Instruction Manual
FRA206299, Kit Turbo-Vent 28 F
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>