UNITOPSCI MP5 Car Player Instruction Manual
- June 7, 2024
- UNITOPSCI
Table of Contents
- Tips and Warnings
- [Safety Notice]
- [Test]
- [Disassembly and Installation Steps]
- [REAR INTERFACE DESCRIPTION]
- [POWER HARNESS DESCRIPTION]
- [Rear View Camera Wiring]
- [Icon Introduction]
- [Steering Wheel Control]
- [Parameters]
- [USB DVR function optional
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
F133 Operation Manual Car MP5 Player
Tips and Warnings
In orderto emphasize the important information of the user manual, special attention should be paid when seeing the label , which indicates some important warnings and reminders.
[Safety Notice]
Read al instructions before installation. I i recommended thal the machine be
insalled by a car audio professional.
This machine is suitable for the vehicle 12V power supply system (the ground
wire must be grounded), please do not install the machine in the 24V vehicle,
otherwise it will damage the machine.
Do nat repair the power fuse without professional guidance. Improper use of
the fuse can cause damage to the machine and cause a fire.
To avoid violating traffic rules, drivers cannot watch videos wile driving and
operating machines fo avoid unnecessary accidents.
For the sake of safety and to ensure the normal use of the product, please
invite professionals o insall,disassembe or repay the machine to avoid
machine damage and accidents.
Pleases do not placing this product in a humid environment and water in case
causing fire due to electric shock or other unnecessary damage.
Note: To Prevent Burning The Machine, Do Not Turn On The Power Until The
Power Cord Is Properly Connected!
[Test]
Ad quick simple test before the installations to confirm that the device is
Working normally and as expected in case there is a wing steed in the
subsequent installation, which will abuse it to fail to work. If you perform
successful test but the unti did not work after installing it please recheck
the installation steps.
Test car stereo:
- The red and yellow wires of the car stereo combine together firstly and then connected to the positive pole of the 12V batery
- The black wire is connected to the negative pole of the battery.
- Two seconds later, check the car stereo. If the screen is lighting up, it means the car stereo is properly functioning.
[Disassembly and Installation Steps]
[REAR INTERFACE DESCRIPTION]
(Note: The picture is for reference only, please refer to the actual product)
[POWER HARNESS DESCRIPTION]
(Note: The picture is for reference only, please refer to the actual praduct)
[Rear View Camera Wiring]
When using the rear view reversing function, the system will automatically
disconnect e link with the mobile pone, such as calls and music in Bluetooth
mode, mobile phone mirroring links, etc., which are all normal,
Note: When Installing, Whether You Use a Reversing Camera Or Not, Please
Connect The Reversing Cable. Otherwise, Your Wifi And Bluetooth Signals Will
Be Affected |
- Monitor (Not Induced in the Package)
- Camera Pawer Source
- Camera (Optional)
[Icon Introduction]
- Machine – Host
1| | Last song
---|---|---
2| | Press it long time to turn on/off Press it.
Short time to enter into Switch mode.
3| | Next Song
4| | VOL+
5| | VOL-
6| MIC| Built-in microphone hole
7| RES| Reset(press with a sharp object)
8| AUX| External audio input jack
9| | Screen pop-up/screen stow (electrically retractable)
10| | Screen angle adjustment (electrically retractable)
11| | Return to the main interface
12| | Return to the previous interface - Remote Control Description (Optional)
- Show UI
(Note: The picture is for reference only, please refer to the actual product)
1.Wired/Wireless IOS CarPlay 2.Wired IOS mirror Link 3.Wired/Wireless Android Auto 4.Wired Android mirror Link
For Mirror Link, you can choose Android Wired/Wireless Connection or ‘Apple Wired Wireless Connection according to your requirements. You can click the corresponding module to 2@ how to use the Mirror Link
[Steering Wheel Control]
Steering wheel control learning method:
Connec the KEY and KEY2 on the car player’s power cable plug to the. original
cars steering wheel control wir2. Afar touching the button icon on the screen,
quickly find the corresponding function button on the steering wheel of the
original car, then press the button until the machine screen prompts tha the
installation is successful, then release it Indicates that the learning is
successful, you can learn the next button.
[Parameters]
Category | Parameter |
---|---|
System | Windows |
Size ( Optional ) | 5.1″/5.5″/6.9″/7″/9″/9.5″/10.1″/10.4″/14″ |
RAM | 512M |
ROM | large capacity USB/TF cards |
Other functions | Wired /wireless-Carplay/Android |
Screen resolution ( Optional ) | 1024600/1280480/800*1280 |
Mirror link | Android/10S |
Radio chip | F133 |
Power Output | 4*45W |
Work temperature | -40°C-80°C |
Steering wheel control function | Support |
Bluetooth version | 5. |
Power amplifier chip | AC7388 |
Radio Band | FM |
Video output | Support |
External microphone | Support |
USB | Double USB interface |
Video format | MKV/RMVB/AVI/MP4/MDV etc |
Audio format | APE/FLAC/WAV/MP3/WMA etc |
Picture format | PNG/JPEG/JPG/GIF/WBMP/BNP etc |
Language | Chinese/English/French/Italian/Korea |
n/Japanese/Arabic/Spanish/Portuguese se/Russian/Turkish/Vietnamese/Herb ew/Polish/German
[USB DVR function optional
| Take picture function: Press this icon to Save the pictures you like.
---|---
| Record Function: Press this icon to Record and save the pictures you like.
| Lock: Press this icon to keep and lock you like.
| Replay Function: All the video and images are saved here.
| Setting Function: Into Setting interface, according your request to set what
you
| This icon is flashing when it is being videotaped.
| This Icon is sound recording, Optional voice and no voice.
| This Icon is recycling video of few minutes.
‘Thank you again for using our product. If you have further questions, please
contactor cuss to me reservice staff. Product Ul or functions may be modified
and upgraded from time to time without notice. Itis normal if the manual has
some discrepancies.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.