behringer B105D Ultra Compact 50 Watt PA or Monitor Speaker with MP3 Player and Bluetooth Audio Streaming User Guide

: June 4, 2024
: Behringer

Table of Contents

Important Safety Instructions
LEGAL DISCLAIMER
LIMITED WARRANTY
B105D Controls
B105D Getting started
Specifications
Important information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide behringer B105D Ultra Compact 50 Watt PA or
Monitor Speaker with MP3 Player and Bluetooth Audio
Streaming

B105D
Ultra-Compact 50-Watt PA/Monitor Speaker with MP3 Player and Bluetooth® Audio Streaming

Important Safety Instructions

**** Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high- quality professional speaker cables with ¼” TS or twist-locking plugs pre- installed. All other installations or modifications should be performed only by qualified personnel.

**** This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

** This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
** To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

Caution
** To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
** These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
****Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

B105D Controls

|
---|---

Step 1: Controls

(1) HIGH EQ knob adjusts the level of treble frequencies.
( 2) MID EQ knob adjusts the level of midrange frequencies.
(3) LOW EQ knob adjusts the level of bass frequencies.
(4) LEVEL 2 knob adjusts the input level for the LINE INPUT and LINE 2 jacks.
(5) LEVEL 1 knob adjusts the input level for the MIC/LINE 1 input.
(6) MAIN LEVEL knob adjusts the final, main output volume.
(7) POWER LED lights up to indicate the unit has been powered on.
(8) USB input accepts USB connection from memory devices with MP3 files.
(9) BLUETOOTH button activates the Bluetooth circuit and makes the unit available for Bluetooth pairing and audio playback from Bluetooth-equipped devices. When the Bluetooth circuit is first activated, the button’s indicator LED will blink; When the Bluetooth successfully pairs with a Bluetooth device, the LED will stop blinking and remain lit.
(10) BACK ( **) button lets you skip to the previous track (short press) or scroll backward through the current track (long press) playing back via USB or Bluetooth.
(11) PLAY/PAUSE ( **) button begins or stops playback of tracks via USB or Bluetooth.
(12) FORWARD ( **) button lets you skip forward to the next track (short press) or scroll forward through the current track (long press) playing back via USB or Bluetooth.
(13) LINE INPUT jack connects to external audio sources using cables with 1⁄8″ (3.5 mm) stereo connectors.
(14) LINE 2 combo jack accepts audio signals over cables using XLR, balanced ¼” TRS, or unbalanced ¼” TS connectors.
(15 ) MIC/GUITAR latching switch toggles the MIC/LINE 1 input between settings optimized for balanced signals from microphones (MIC) or unbalanced signals from instruments (GUITAR), such as guitars or basses.
(16) MIC/LINE 1 combo jack accepts balanced microphone signals via cables with XLR connectors or unbalanced instrument signals (from guitars or basses) via cables with ¼” TS connectors. Use the MIC/GUITAR button to optimize this input for microphones or instrument signals.
(17) MAIN IN combo jack accepts audio signals over cables using XLR, balanced ¼” TRS, balanced ¼” TRS, or unbalanced ¼” TS connectors. The MAIN IN input level is controlled by the LINE 1 knob.
(18) THRU jack can be used to send your final mix out over a cable with XLR connectors to a mixer, amplifier, or an additional active speaker.
(19) MIC/LINE LEVEL l** atching switch optimizes the THRU output for balanced signals (MIC, switch in) or unbalanced signals (LINE, switch out).

B105D Getting started

Step 2: Getting started

Place the speaker(s) in desired locations, preferably on stands as personal monitors or mains.
Set all controls as shown: HIGH, MID, and LOW knobs to their centered position at 12 o’clock; LEVEL 1, LEVEL 2, and MAIN LEVEL knobs set to their minimum levels at the fully counterclockwise position.
Connect all analog microphones, instruments, and/or RCA cables to their respective input jacks. D O NOT turn on the power yet.
Turn on your audio sources (mixer, microphones, instruments).
Power up the B105D by moving the POWER switch to the “on” position. The POWER LED on the front panel will light up.
To pair a Bluetooth device with the B105D, follow these steps:
• Press the BLUETOOTH button to activate the Bluetooth circuit. The BLUETOOTH button’s indicator LED will blink.
• Open Bluetooth on your smartphone, a tablet computer, MP3 player or other Bluetooth equipment to pair and connect.
• When the BLUETOOTH button’s LED lights are solid, you can begin playing back music from your Bluetooth device.
Slowly rotate the MAIN LEVEL knob clockwise until you achieve a comfortable listening level.
Insert your USB device with MP3 audio files into the USB input.
Start or stop MP3 playback by pressing the PLAY/PAUSE ( ) button. Skip or scroll through tracks by using the BACK ( ) or FORWARD ( ****) buttons begin.
Turn the MAIN LEVEL knob up to a comfortable level.
Plug a microphone or instrument into the MIC/LINE 1 combo jack.
If you are using a microphone, press the MIC/GUITAR latching switch to the inward MIC position. If you are using an instrument, such as guitar or bass, move the MIC/GUITAR latching switch to the outward GUITAR position.
While playing or speaking into the microphone, slowly rotate the LEVEL 1 knob clockwise until you reach a comfortable level. If you notice any undesirable distortion in your instrument or mic sound, turn the LEVEL 1 knob back down until the distortion stops.
Plug additional audio devices into the LINE 2 combo jack or LINE INPUT jack (for audio devices such as smartphones, tablets, or MP3 players that use 1⁄8″ stereo connectors).
While playing audio from these additional audio devices, slowly turn the LEVEL 2 knob clockwise until you achieve a comfortable listening level. If necessary, adjust the output levels on your audio devices.
Balance the analog signals against the MP3 and Bluetooth playback by adjusting the LEVEL knobs for each analog channel until you find an acceptable mix. If an analog signal distorts, turn that channel’s LEVEL knob back down.
Adjust the HIGH, MID, or LOW EQ controls if the overall sound needs overall frequency adjustment.
Set the final, overall volume by adjusting the MAIN LEVEL knob.

Specifications

Amplifier

Other important information

Important information

Register online.
Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
Power Connections.
Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer B105D

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com

FCC ID: QWHB105D1
B105D
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:

This Transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.

The full text of the EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX,
United Kingdom
We Hear You