KLLINGER BORN Unbenannt-1 Initial Current Limiter Instruction Manual
- June 15, 2024
- KLLINGER BORN
Table of Contents
KLLINGER BORN Unbenannt-1 Initial Current Limiter Instruction Manual
Dear customer,
thank you very much for buying this product.
This product meets the demands of the valid European and national guidance.
The CE-compliance was proven.
To conserve the delivery conditions of the product and ensure a safe
operation, you must read this operating instructions before start-up. Please
consider all operation and security references!
Shipment
- Single-phase Initial current limiter
- Operating instruction
The security references must be observed!
This operating instruction belongs to the product and contains important references for start-up and operation. Please pay attention hereupon, also when passing the product to a third party. Make sure that you don’t loose this operating instruction and store it at a secure place.
Declaration of conformity
We, Klinger & Born GmbH, In den Schlangenäckern 5, 64395 Brensbach declare
in sole responsibility, that the product
Initial current limiter
which this declaration corresponds to, is conform with the following
engineer standards or normativ documents:
DIN EN 60947-4-2 DIN VDE 0620-1
The terms of these directive(s) apply: Niederspannungsrichtlinie 2006/95/EG EG-EMV-Richtlinie 2004/108/EG
For any questions contact our technical consultants:
Klinger & Born GmbH
In den Schlangenäckern 5
64395 Brensbach, Germany Phone. +49 (0) 6161 – 9309 – 0 Fax +49 (0) 6161 –
9309 – 10
Internet: www.klibo.de E-Mail: info@klibo.de Mo to Fr 8.00am to 4.15pm
All contained company names and product labels are trade marks of the particular owners. Copyright reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>