nutribullet PWIRBBQ90 Wireless BT BBQ Thermometer User Manual

: June 6, 2024
: nutribullet

Table of Contents

nutribullet PWIRBBQ90 Wireless BT BBQ Thermometer User Manual
Download the APP
Download and install it lor free.
Pair with your phone
Put in the Battery
Install the probe
Enjoy your barbecue time
Two different way to use it
WARNING
Attention:
Operation applies to the following two conditions:
Features:
What’s in the Box:
Technical Specs:
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nutribullet PWIRBBQ90 Wireless BT BBQ Thermometer User Manual

This thermometer is not a standard bluetooth device, please do not try to connect it in the bluetooth device list of the smart phone OS. If a PIN code is required, just cancel it and pair it in the app of the
thermometer.

Download the APP

Search the keyword ‘easyBBQ’ in Appstore or Google Play, or scan the following QR code with your phone.

Download and install it lor free.

Make sure your phone meet the requirements:
Phone 4S, and later models;
iPod touch 5th, iPad 3rd generations and later models, all ipad mini;
Android devices running version 4.3 or later, with Wireless BT 4.0 module.

Do not place the plastic thermometer on the side of hot surfaces. It is not designed to withstand heat from a grill or smoker. Only the thermometer probes can
come into contact with hot surfaces.

Power ON/OFF

Press and hold the button for more than 3 seconds when it is in OFF mode, it will be powered on. And the LCD display will show ‘ON’.
If you do the same when it is in ON mode, it will be powered off.
When there is no probe inserted in the device, it will powered off automatically.

Pair with your phone

Switch on your device and keep the blue-tooth switch of your phone on.
Launch the app, and follow the instrucions in the app to pair and activate the device: Press the Pairing 1 Stop Alarm Button (on the top of the device).
Connected successfully.

After pairing, your devices stay paired until you unpair them or change to other phones.

Put in the Battery

2 AAA size batteries are needed for this device.
Make sure they are put in the right direction by following the icons on the unit.

Slide the battery cover to open.
Put in batteries, noticing the icons which show directions
Slide back the battery cover.

Install the probe

The device will keep scanning the socket when its power is switched on.
When you insert the probe into the food, make sure the front tip of the probe is in the center of the food to get accurate temperature.

Enjoy your barbecue time

Choose food type end preference for the food where each probe is inserted, the app and the device will display its current and tagert temperature.
When the food is ready, the app and the device will alarm.

The user interface of the app may be changed when upgrade. Please follow the instructions in the app.

Two different way to use it

It can be used as a traditional instant-reading thermometer when the cable is wrapped into the unit. It will become a smart thermometer
that enables you monitor food temperature.

WARNING

The heat resistance varies in different components of the probe,
DO NOT put the probes directly in fire flame.
DO NOT put the wrap into oven, or it will melt!
Probes are NOT dishwasher safe.

Attention:

Temp Probes above for reference only, subject to the actual probes.

Operation applies to the following two conditions:

This device may not cause interference;
This device must accept an interference, including interference that may cause undesired operation of this device.
App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.