ucom uFi Mobile Internet Modem User Guide

User Guide

Overview

uFi is a portable wireless router, providing a simple way to share 4G with any Wi-Fi embedded device.
1.1 Package contents

1.2 Application

1.3 Device overview

1. Power key
2.WPS key| 3. LED light
4. Charging/Micro USB Jack
---|---

Use the device’s 2 buttons as follows:

Button

|

Description

---|---
Power key| Press and hold for 3 seconds to turn the device on/off.
Short press to put the LED in either active or sleep mode.
Press and hold for 10 seconds to reboot the device
WPS| Press and hold the WPS button for 3 seconds until the Wi-Fi LED blinks
 Short press to put the device into either active or sleep mode.
Reset| Press both “Power” and “WPS” keys at the same time for 3 seconds to reset your device to factory mode.

1.4 LED display

LED description:

Icon

|

icon display

---|---
Network indicator|

LED is blue when connected to the Internet or flashes when the Internet is disconnected. LED is red when there’s no network, service, or SIM card.

Wi-Fi indicator| LED is blue when Wi-Fi is active.
SMS indicator| LED is blue when you have a new message or flashes when your inbox is full.
Battery indicator|

LED is red when the battery is low. A blue, slowly flashing LED indicates that the device is working. A blue, quickly flashing LED indicates that the device is charging. A blue, non-flashing LED indicates that the device is fully charged.

Power saving mode:

• If no key is pressed on the device for 30 seconds, then all the LED lights will automatically turn off except the battery LED light. An LED light will come on when the USB cable is used to charge the device or any key is pressed on the device.
• If there is no Wi-Fi access used on the device for 10 mins, Internet network dialling will disconnect automatically and will connect automatically once any key is pressed on the device or Wi-Fi is accessed from the device.
• If there is no Wi-Fi access to the device for 30 minutes, then all LED lights will be automatically turned off along with the Wi-Fi AP function. Press any key to restore the Wi-Fi AP function.

1.5 Installing the device
Step 2: Install SIM card in the card slot.
WARNING! Do not insert the micro SIM card into the slot before opening the slot cover. Follow the mark on the slot to open and lock.

Step 2: I nstall SIM card and SD card in the cards slot.
WARNING! Do not insert the micro-SIM/SD card into the slot before opening the slot cover. Follow the mark on the slot to open and lock.

Step 3: Install battery

Step 4: Close the back cover

1.5 Connecting in Wi-Fi mode
The Wi-Fi name (SSID) and Wi-Fi key are located on the sticker on the rear of the back cover. They also can be found on the label under the battery.
Step 1: Use the Wi-Fi manager on your Wi-Fi embedded device to select the Wi-Fi name (SSID).

• From a Windows PC: Right-click Wireless network connection on the taskbar, and select: View Available Networks.
• From a Mac computer: Select System Preferences -> Network -> Airport. Click “Advanced” to choose an SSID from the list of available networks.
• From an iOS device: Settings -> Wi-Fi. Choose an SSID from the available networks.
• From an Android device: Settings -> Wireless controls -> Wi-Fi settings. Choose an SSID from the available networks.

Step 2: Enter the Wi-Fi key when prompted for a security key.

Quick Setup

Launch the Internet browser and enter the address written on the label under the battery. Enter the password to log into the uFi configuration page.
Default login password can be found on the label under the battery.
Log in and click “Settings” to configure the basic settings.
Wi-Fi Settings:

• SSID: Set the Wi-Fi name of this device.
• Security: Configure the security mode for the Wi-Fi connection.

Charging the device

You have two ways to charge your device.
Charging with an adapter
Connect a USB cable between the device and the head of the adapter and plug it into a power socket to start charging. When the device is powered off, it takes a maximum of 3 hours before being fully charged.
Charging via USB
You can also charge the device by connecting it to a PC with a USB cable.
When the device is powered off, it will take a maximum of 4 hours to finish charging.
Note: In order to protect the battery, when the low-power LED indicator flashes, charge the device as soon as possible.

www.ucom.am

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>