CISCO Business Dashboard Microsoft Hyper V User Guide

June 15, 2024
Cisco

CISCO Business Dashboard Microsoft Hyper V User Guide
CISCO Business Dashboard Microsoft Hyper V

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE- NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.

Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)

© 2020 Cisco Systems, Inc. All rights reserved.

The Java logo is a trademark or registered trademark of Sun Microsystems, Inc. in the U.S. or other countries. © 2020 Cisco Systems, Inc. All rights reserved.

CONTENTS

CHAPTER 1
Cisco Business Dashboard Overview 1
About Cisco Business Dashboard 1
Device Management Mode 2
Audience 2
Related Documents 2
Terminology 3
System Requirements for Cisco Business Dashboard 4
System Requirements for Cisco Business Dashboard Probe 5

CHAPTER 2
Installing Cisco Business Dashboard 7
Obtaining and Verifying Cisco Business Dashboard Software 7
Installing Cisco Business Dashboard with Hyper-V 8

CHAPTER 3
Installing Cisco Business Dashboard Probe 11
Obtaining and Verifying Cisco Business Dashboard Probe Software 11
Installing Cisco Business Dashboard Probe with Hyper-V 12

Cisco Business Dashboard Overview

This chapter contains the following sections:

  • About Cisco Business Dashboard , on page 1
  • Device Management Mode, on page 2
  • Audience, on page 2
  • Related Documents, on page 2
  • Terminology, on page 3
  • System Requirements for Cisco Business Dashboard, on page 4
  • System Requirements for Cisco Business Dashboard Probe, on page 5

About Cisco Business Dashboard

Cisco Business Dashboard provide stools that help you monitor and manage the devices your Cisco Business network. It automatically discovers your network, and allows you to configure and monitor all supported devices such as switches, routers, and wireless access points. It also notifies you about the availability of firmware updates, and about any devices that are no longer under warranty or covered by a support contract.

You can view the application by clicking Request a Demo

Cisco Business Dashboard is a distributed application which is comprised of two separate components or applications as described below:

The Dashboard
Cisco Business Dashboard also referred to as the Dashboard, is installed at a convenient location in the network. From the Dashboard user interface, you can get a high-level view of the status of all the sites in your network, or concentrate on a single site or device to see information specific to that site or device.

The Probe
Cisco Business Dashboard Probe also referred to as the Probe is installed at each site in the network and associated with the Dashboard. The probe performs network discovery and communicates directly with each managed device on behalf of the Dashboard.

Note
Certain network devices support being directly associated with the Dashboard and managed without a probe being present. When network devices are being managed directly in this way, all management functions are available for the device, but the network discovery process may not be as comprehensive as when a probe is present

Device Management Mode

Direct Managed
Certain devices can support direct association with the Dashboard and managed without a probe being present in the network.

In a direct managed network, you will need to connect the first device to the Cisco Business Dashboard manually. Then, this device reports information such as CDP, LLDP, and m DNS (aka Bonjour) to Dashboard. This information is used to identify additional devices in the network, Dashboard then connects these devices to itself automatically hence those devices become manageable, and the process repeats until all devices have been discovered. Depending on the size of your network, this process may take tens of minutes. You may optionally have the dashboard explicitly search the IP address ranges to discover network devices, which can be in other VLANs or subnets.

Direct managed network is recommended if all your devices support direct management.

Probe Managed
Probe is installed at each site in the network and associated with the Dashboard. The Probe performs network discovery and communicates directly with each managed device on behalf of the Dashboard.

A software Probe is a probe running in a virtual machine or on a Linux host. A software Probe can generally manage up to 50 network devices. Certain devices include the Probe application embedded in the device firmware. An embedded Probe can manage up to 15 network devices.

In one network you should only enable one Probe

Audience
This guide is primarily intended for network administrators who are responsible for Cisco Business Dashboard
software installation and management. Related Documents The documentation for Cisco Business Dashboard is comprised of a number of separate guides. These include:

Installation Guides

The following table lists all the installation guides for Dashboard software that can be deployed on different platforms. Refer the path provided in the location column for details:

Supported Platforms Location
Microsoft Hyper-V This document.
Oracle VirtualBox [Cisco Business Dashboard & Probe Installation Guide for

Oracle VirtualBox](https://www.cisco.com/c/en/us/td/docs/cloud-systems- management/network-automation-and-management/cisco-business-dashboard/install- guides/b_Cisco_Business_Dashboard_Installation_Guide_for_Oracle_VirtualBox.html)
VMWare vSphere, Workstation and Fusion| Cisco Business Dashboard & Probe Installation Guide for VMWare
Amazon Web Services| Cisco Business Dashboard & Probe Installation Guide for Amazon Web Services (AWS)
Ubuntu Linux (Dashboard and Probe) and Raspbian Linux(Probe only)| Cisco Business Dashboard & Probe Installation Guide for Linux

Quick Start Guide —This provides details on performing the initial setup for Cisco Business Dashboard using the most commonly selected options. Refer to Cisco Business Dashboard Quick Start Guide.

Administration Guide— This is a reference guide that provides details about all the features and options provided by the software and how they may be configured and used. Refer to https://www.cisco.com/c/en/us/ td/docs /cloud-systems-management/network-automation-and-management/cisco-business- dashboard/qsg/b_ CBD_QSG.htmlCisco Business Dashboard Administration Guide.

Device Support List— This list provides details of the devices supported by Cisco Business Dashboard and
the features available for each device type.For a list of all the devicessupported by Cisco Business Dashboard,
refer to Cisco Business Dashboard – Device Support List

Terminology

Term Description
Hyper-V A virtualization platform provided by Microsoft Corporation.
Open Virtualization Format (OVF) A TAR archive containing one or more virtual

machines in OVF format. It is a platform-independent method of packaging and distributing Virtual Machines (VMs).
Open Virtual Appliance orApplication (OVA) file| Package that contains the following files used to describe a virtual machine and saved in a single archive using .TAR packaging:•  Descriptor file (.OVF)•  Manifest (.MF) and certificate files (optional)
Raspberry Pi| A very low cost, single board computer developed by the Raspberry Pi Foundation. For more information, see https://www .r aspberrypi.or g/.
Raspberry Pi OS| Formally known as Raspbian, the Raspberry Pi OS is a Debian- based linux distribution optimized for the Raspberry Pi. For more information, see https://www .r aspberrypi.org/softwar e/.
VirtualBox| A virtualization platform provided by Oracle Corporation.
Term| Description
Virtual Hard Disk (VHD)| Virtual hard disk is a disk image file format for storing the complete contents of a hard drive.
Virtual Machine (VM)| A virtual computing environment in which a guest operating system and associated application software can run. Multiple VMs can operate on the same host system concurrently.
•  VMWare ESXi•  VMWare Fusion•  vSphere Server•  VMWare Workstation| A virtualization platform provided by VMWare Inc.
vSphere Client| User interface that enables users to connect remotely to vCenter Server or ESXi from any Windows PC. You can use the primary interface for vSphere Client to create, manage, and monitor VMs, their resources, and the hosts. It also provides console access to VMs.
Hypervisor| Also known as a virtual machine monitor or VMM, is software that creates and runs virtual machines (VMs). A hypervisor allows one host computer to support multiple guest VMs by virtually sharing its resources, such as memory and processing.
Amazon Web Services (AWS)| An on-demand cloud computing platform.
Micosoft Azure Active Directory| A cloud-based identity and access management service that provides single sign-on and multi-factor authentication to help protect users from 99.9 percent of cybersecurity attacks.

System Requirements for Cisco Business Dashboard

Cisco Business Dashboard is distributed as a zipped virtual machine image suitable for use with Microsoft Hyper-V version 10.0 or above. The following table lists the compute resources required for Cisco Business Dashboard based on the number of devices under management.

Table 1: Cisco Business Dashboard Compute Resource Requirements

#Device Supported # vCPU RAM Disk Space
Up to 300 2 4GB 60GB
Up to 300 and integrated with external applications 4 8GB 60GB
Up to 3000 16 32GB 60GB

Cisco Business Dashboard is administered through a web user interface. To use this interface, your browser
must be one of the following:

  • Apple Safari (macOS only)—2 most recent major versions
  • Google Chrome—Latest version
  • Microsoft Edge—2 most recent major versions
  • Mozilla Firefox—Latest version

Note
When using Safari, check that the certificate from Cisco Business Dashboard Probe is set to Always Trust. Otherwise, certain functions that depend on the use of secure we sockets are expected to fail. Thesis a limitation of the Safari web browser.
Your network must allow all instances of Cisco Business Dashboard Probe and directly managed network devices to establish TCP connectivity with Cisco Business Dashboard. For more details on the ports and protocols used, see Frequently Asked Questions in the Cisco Business Dashboard Quick Start Guide.

System Requirements for Cisco Business Dashboard Probe

Cisco Business Dashboard Probe is distributed as a virtual machine image suitable for use with Microsoft Hyper-V version 10.0 or above. The compute resources required for Cisco Business Dashboard Probe are:

  • CPU: 1x 64-bit Intel architecture
  • Memory: 1GB
  • Disk space: 10GB

Cisco Business Dashboard Probe is administered through a web user interface. To use this interface, your browser must be one of the following:

  • Apple Safari (macOS only)—2 most recent major versions
  • Google Chrome—Latest version
  • Microsoft Edge—2 most recent major versions
  • Mozilla Firefox—Latest version

Cisco Business Dashboard Probe monitors and accesses the network devices that meet the following requirements:

  • Must be in the same subnet as the PC that is running the Probe, or be directly attached to a managed device and reachable via TCP/IP.
  • Must be a Cisco Business or Cisco Small Business 100 to 500 series device.

Installing Cisco Business Dashboard

This chapter contains the following sections:

  • Obtaining and Verifying Cisco Business Dashboard Software, on page 7
  • Installing Cisco Business Dashboard with Hyper-V, on page 8

Obtaining and Verifying Cisco Business Dashboard Software

Cisco Business Dashboard is distributed as a zipped Microsoft Hyper-V virtual machine. The virtual machine image also contains the Cisco Business Dashboard Probe application, allowing a single VM to act as both Dashboard and Probe for a particular site. To obtain the virtual machine image, navigate to
https://www.cisco.com/go/cbd-sw.

The virtual machine image has been cryptographically signed by Cisco to ensure that the software has not been tampered with. The Hyper-V virtual machine image format does not provide a mechanism for crytographically signing virtual machines. In order to sign the image, a signature has been generated for the image zip file and is recorded in a file separate to the virtual machine image. The signature file, the virtual machine image, and a number of supporting files have been packaged in to a single zip file. It is this zip file that is downloaded from the CiscoSoftware Center. The contents of this zip file are described in the following table:

Filename Description
CISCO_BUSINESS_DASHBOARD_KEY-CCO_RELEASE.cer The code signing certificate

used to sign the virtual machine image
Cisco_Business_Dashboard-2.2.0.xxxxxxxx.zip| The virtual machine image
Cisco_Business_Dashboard-2.2.0.xxxxxxxx.zip.signature| A file containing the cryptographic signature for the virtual machine image
README.txt| The README file describes the contents of the zip file and how to validate the signature
scripts/cisco_x509_verify_release.py| A python script to verify the signature
Filename| Description
verify.bat| A script to verify the signature in a format suitable for use on Microsoft Windows
verify.sh| A script to verify the signature in a format suitable for use on Unix-like operating systems

To verify the virtual machine image signature, do the following:

  1. Ensure you have the OpenSSL package and the Python programming language installed on the PC where you will verify the signature.
  2. Unzip the file you downloaded from the software center into a convenient location on the PC
  3. Validate the signature by running either the verify.bat file or the verify.sh file, depending on the PC operating system. The script will download the Cisco root certificate and intermediate certificate  fromcisco.com, verify that the code signing certificate has not been tampered with, and then validate the signature of the virtual machine image. The success or failure of the process will be reported in the script output.

Installing Cisco Business Dashboard with Hyper-V

Once you have obtained and verified the Cisco Business Dashboard software, you may install it using the following steps:

  1. Ensure you have a working Microsoft Hyper-V environment available to host the virtual machine. For  assistance in setting up your environment, refer the Microsoft Hyper-V documentation. The following links provide a useful starting point:
  2. Unzip the signed archive file to a convenient location on your PC. Optionally, use the verify.* scripts to validate the cryptographic signature as described above.
  3. Unzip the virtual machine image archive to a convenient directory on your PC.  Open Hyper-V Manager and select Action > Import Virtual Machine …
  4. Follow the prompts and make sure you have selected the directory created when you extracted the archive in step 2. Consider whether you want the VM files to be copied, moved, or left in place when you select the import type.
  5. Check that the network adapter is connected to a virtual switch that is mapped to the correct external network on the host machine.
  6. Start the virtual machine.

The virtual machine will boot and automatically start the Cisco Business Dashboard application. Refer to the Cisco Business Dashboard and Probe Quick Start Guide for details of how to access the application and perform initial setup

Installing Cisco Business Dashboard Probe

An instance of Cisco Business Dashboard Probe is required for each site in your network that you want tomanage. The Probe discovers the network, collects performance and configuration data from the discovered devices, and reports that information back to the Dashboard.

This chapter contains the following sections:

  • Obtaining and Verifying Cisco Business Dashboard Probe Software, on page 11
  • Installing Cisco Business Dashboard Probe with Hyper-V, on page 12

Obtaining and Verifying Cisco Business Dashboard Probe Software

Cisco Business Dashboard Probe is distributed as a zipped Microsoft Hyper-V virtual machine. The Probe is also included as part of the Cisco Business Dashboard virtual machine image, allowing a single VM to act as both Dashboard and Probe for a particular site. To obtain the virtual machine image, navigate to
https://www.cisco.com/go/cbd-sw.

The virtual machine image has been cryptographically signed by Cisco to ensure that the software has not been tampered with. The Hyper-V virtual machine image format does not provide a mechanism for cryptographically signing virtual machines. In order to sign the image, a signature has been generated for the image zip file and is recorded in a file separate to the virtual machine image. The signature file, the virtual machine image, and a number of supporting files have been packaged in to a single zip file. It is this zip file that is downloaded from the CiscoSoftware Center. The contents of this zip file are described in the following table:

Filename Description
CISCO_BUSINESS_DASHBOARD_KEY-CCO_RELEASE.cer The code signing certificate

used to sign the virtual machine image
Cisco_Business_Dashboard_Probe-2.2.0.xxxxxxxx.zip| The virtual machine image
Cisco_Business_Dashboard_Probe-2.2.0.xxxxxxxx.zip.signature| A file containing the cryptographicsignature for the virtual machine image
Filename| Description
README.txt| The README file describes the contents of the zip file and how to validate the signature
scripts/cisco_x509_verify_release.py| A python script to verify the signature
verify.bat| A script to verify the signature in a format suitable for use on Microsoft Windows
verify.sh| A script to verify the signature in a format suitable for use on Unix-like operating systems

To verify the virtual machine image signature, do the following:

  1. Ensure you have the OpenSSL package and the Python programming language installed on the PC where you will verify the signature.
  2. Unzip the file you downloaded from the software center into a convenient location on the PC
  3. Validate the signature by running either the verify.bat file or the verify.sh file, depending on the PC operating system. The script will download the Cisco root certificate and intermediate certificate from cisco.com, verify that the code signing certificate has not been tampered with, and then validate the signature of the virtual machine image. The success or failure of the process will be reported in the script output.

Installing Cisco Business Dashboard Probe with Hyper-V

Once you have obtained and verified the Cisco Business Dashboard Probe software, you may install it using the following steps:

  1. Ensure you have a working Microsoft Hyper-V environment available to host the virtual machine. For assistance in setting up your environment, refer the Microsoft Hyper-V documentation. The following links provide a useful starting point:
  2. Unzip the signed archive file to a convenient location on your PC. Optionally, use the verify.* scripts to validate the cryptographic signature as described above.
  3. Unzip the virtual machine image archive to a convenient location on your PC.
  4. Open Hyper-V Manager and select Action > Import Virtual Machine …
  5. Follow the prompts and make sure you have selected the directory created when you extracted the archive in step 2. Consider whether you want the VM files to be copied, moved, or left in place when you select the import type.
  6. Check that the network adapter is connected to a virtual switch that is mapped to the correct external network on the host machine. The network interface of the Cisco Business Dashboard Probe should be connected to a VLAN containing the management interfaces for at least one of the network devices. If the Probe is not directly connected to at least one network device, it may be unable to fully discover the network.
  7. Start the virtual machine.
    The virtual machine will boot and automatically start the Probe application. Refer to the Cisco Business Dashboard Quick Start Guide for details on how to access the application and perform the initial setup.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals